Sök:

Sökresultat:

2916 Uppsatser om Human machine interface - Sida 23 av 195

Förändrad interaktion, förändrat värde? : En kvalitativ studie om värdeskapande vid mänsklig och teknisk interaktion

The progress in the field of technology is often described as massive and its development has had a great impact on the social development (Vetenskapsrådet, 2012). As a result of the digital evolution, there has been a change in the way customer and company interact (Normann, 2011). The traditional way for players to interact with each other required an interaction human to human (ibid), a mode of interaction that now can be replaced or supplemented by todays technology and often Internet-based solutions (Salomonson et al., 2013). These technological solutions, the technical interaction, are often referred to as self-service systems. These systems enables the customer to carry out the tasks previously performed by the company (Hilton and Hughes, 2013).

Integration av simuleringsmodeller för bränslesystemet i JAS 39 Gripen

In this final thesis two simulation models have been integrated. The simulation models are models of JAS 39 Gripen?s fuel system, software and hardware. The time consuming and costly work to develop software has made the department of fuel system to build two models in Xmath/Systembuild. The software model also simplifies the comprehension of how the software in the control computer of the fuel system works.

Energisparläge i automationsindustrin : Potential för att minska tomgångsförluster med industriella styrsystem

Former studies have shown that a considerable part of industries? energy usage can stem from idle times in the production. This thesis, carried out at Siemens Industry sector, evaluates the potential for using the control system to automatically put machines into energy saving mode during idle times. The main part of the thesis consists of a case study performed on machine tools at a Scania production site in Södertälje. Through load measurements the potential for energy savings was determined.The results show that there is a great potential for energy savings during idle times at the site.

Vad staten bör göra. En deontologisk och en preferensutilitaristisk analys av beskattning och statliga verksamheter.

This essay is a normative analysis concerning the question of whether the government should be allowed to use taxes to finance the state. What kind of ethical problems arise when the government use taxation? If it is possible to justify taxation, despite potential moral issues, then what should the government do with the funds they have collected? What kinds of government functions are morally justified? Is it merely the kinds of functions that are supposed to uphold negative human rights; or should the government provide health care, education and even culture for the citizens? This analysis aims to answer those questions and also formulate a principle about what the government should be occupied with, if anything at all. In order to achieve this I mainly use the terms freedom and justice to analyse ethical problems. The ideas of John Rawls and Robert Nozick are essential in this project.My answer is that taxation is justified as long as the purpose is to maintain the most fundamental human rights and also under other special circumstances such as if an individual cannot find a way to finance basic education or necessary health care.

Leva med Lean : Hur involveras och motiveras medarbetare till att ständigt arbeta med förbättringar?

The European Union is struggling to maintain democracy and tries to increase the participation among the citizens in Europe. The European Citizens? Initiative, ECI, is a platform established by the European Commission to allow citizens to propose new legislation. ?Water and sanitation are a human right! Water is a public good, not a commodity!? is the first ECI that has met the requirements.

Jakten på den femte kompetensen : En studie om behovet och betydelsen av socialpedagogisk kompetens

Studiens syfte är att undersöka och analysera kompetensbehov inom olika kommunala human service-organisationer, där bland annat socialpedagoger är verksamma i Västerviks kommun. Min studie vill även undersöka inom vilka verksamheter högskoleutbildade socialpedagoger arbetar idag samt vilka kompetenser de har och vilka kompetenser lämpar sig för att arbeta inom human service-organisationer i Västerviks kommun. Denna studie strävar efter att vara ett stöd för att förbereda human service-organisationer i Västerviks kommun inför eventuella utmaningar vid framtida rekrytering av befintlig och ny kompetens. Samtidigt vill jag med min studie stärka kunskapen kring socialpedagoger.Studien består av både en kvantitativ och kvalitativ undersökning. Det empiriska materialet har insamlats via en enkätundersökning och en gruppintervju med personer som har medarbetar- och verksamhetsansvar inom olika human service-organisationer i Västerviks kommun.Resultatet av min studie påvisar att det finns ett kompetensbehov inom human service-organisationer i Västerviks kommun som främst präglas av intellektuella och sociala kompetenser.

Modellering och reglering av mjölkningsrobot

In this master thesis a robot arm belonging to an automatic milking machine from DeLaval is investigated. The robot arm is controlled by a pneumatic cylinder and a valve. The goal of the master thesis is to investigate instability problems and to find out if it is possible to solve them by using gain scheduling. Gain scheduling is a type of controller where the parameters of the controller are changed during operation, for example depending on the working point. First a nonlinear mathematical model of the system was made.

Skotares bränsleförbrukning :

In published studies it is found that the fuel consumption on a forwarder is relatively constant, on time basis. A certain variation between different sizes of forwarders occurs as well as between different working elements. The aim of the study was to establish a forwarders comparatively fuel consumption when driving on road and in the terrain, loaded and unloaded, with high and low gear and with high and low speed as well as with hydrostatic and hydrodynamic transmission. A hypothesis was that low rpm gives lower fuel consumption on distance basic, at all trials. The test driving was made with a Hemek 750 which is a three geared hydrostatic machine and with a Hemek 700 which is a hydrodynamic machine with six gears.

Mänskliga rättigheter vid en naturkatastrof : En jämförelse mellan Haiti och Thailand

There are three main purposes for this thesis; the first is to distinguish the possible violations that can occur in time of natural disasters. The second is to analyze if there is a correlation between political systems and how the effected country handles the aftermath of a natural disaster. The third purpose is to determine the role of the global community and what responsibility lies with them. The issue is often that the aid becomes the main object for discussion and analysis, but the focus rarely shifts to the effected State. Therefore the focus in this essay is the political system and how they cope with the human rights violations that can occur in a time of natural disaster.

Corporate Social Responsibility : -Kan det bidra till demokratisering?

There is a growing awareness that multinational companies have opportunities to influence political conditions. Ethical activities made by multinational companies and ?Corporate Social Responsibility? (CSR) can therefore function as a positive input in society. The primary purpose of this master thesis is to investigate CSR´s contribution to strengthen human rights, and thereby to democratization. The research questions are listed below:1.

Mätning av Mikroläckage i Dentala Implantat

Osseointegrated titanium implants have become a commonly used method in edentulous jaws and today there are success rates in the magnitude of 82 % in the lower jaw and 98 % in the upper. During first year after implantation a fully normal marginal bone loss of 1-2 mm occurs. If the bone loss continues there is a risk of implant failure. High tensions in bone and inflammation caused by bacteria are possible reasons for this problem. It has been shown that a leakage of bacterias occurs between the parts of the implant and there are theories that this has effects on the marginal bone loss. The aim of this thesis has been to increase the knowledge about microbial leakage with help of in vitro tests and virtual simulations.

Koldioxidutsläpp vid vägbyggnad - en fallstudie med jämförelse av alternativa byggnadssätt

Abstract This degree project examines how much carbon dioxide that emits during the construction phase of a road project. This is to make it possible to compare how the amount of carbon dioxide differentiates between traditional road construction and Swepave construction, which is PEAB?s alternative way to design roads. To make the comparison a calculation tool has been produced. To compare the amount of carbon dioxide emissions a reference project was needed.

Visualisering av informationskvalitet : Utformning av kvalitetsindikatorer för Lantmäteriets Fastighetsregister

Fastighetsregistret (The Cadastre) is a large and important information sourcesupplied by Lantmäteriet (the Swedish mapping, cadastral and land registrationauthority). Fastighetsregistret provides geographical information about the 3.2 millionestates in use in Sweden. Fastighetsregistret has a large number of users who trustthat the provided data is reliable, but experience shows that the data can have varyingquality. As a user it is not always possible to access more detailed information inorder to assess to what extent the data in Fastighetsregistret is reliable.The purpose of this master's thesis is to investigate the possibilities of a system with agraphical user interface that present, classify and visualize the quality of the data inFastighetsregistret. The defined user group for this suggestion is internal users atLantmäteriet who have a good understanding of Fastighetsregistret.

Design av databassystem för testresultat från Tor-systemet

This master?s thesis was performed at PartnerTech AB in Åtvidaberg. It addresses the problem of managing test results obtained from testing electronics manufactured by PartnerTech. PartnerTech has developed a test system, called Tor, which performs tests on manufactured boards and stores the test results in files. The Tor system consists of both hardware and software part, where the software runs on an ordinary PC with MS DOS/Windows 2000.

Kunskapsdelning i byggbranschen : Delningsprocessen i Skanskas projektorganisation

Introduction     Knowledge has come to be an increasingly important factor for both individuals in the labor market and companies in competition. When a person leaves an organization the knowledge often follows, and a knowledge gap is created. When knowledge is shared within an organization, the individual?s knowledge is available for all members of the organization. Knowledge can thus be converted from human capital to structural capital.

<- Föregående sida 23 Nästa sida ->