The aim of this study has been to examine how a few members of the Finnish and non- Scandinavian Romani subgroups experience their own, and their groups, situation on the Housing- and Labour Market. We´ve studied our respondents? experiences of discrimination, which difficulties they think there are, what strategies can be used to deal with these difficulties and also their own ideas on how to improve the situation for the Romani people in the Swedish society. This has been done by six individual structured interviews which have been analyzed with concepts from Symbolic Interactionism, including Goffman?s Dramaturgical Role Theory, definition of Stigma and Kelly?s theory of Personal Constructions.

Photovoltaic Systems in Sweden has longbeen heavily dependent on subsidies and grants to bring in a profit for the investor. Production of excess electricity is a major reason for this as the compensation for excess electricity today is low. However, there are businesses that have an electricityneed that are particularly suitable for solar electricity. These businesses have an electricity demand when the sun shines the brightest and if the Photovoltaic System is properly scaled, the excess electricity can be minimized. A golf club is that kind of a business and this thesis aims to examinate the solar power potential for golf businesses in Sweden.Nine golf clubs was selected from different locations in Sweden.

Article 4.1(h) in the Rome I regulation establishes which law that will be applicable on contracts concerning financial instruments concluded in multilateral systems. The main problem is that most contracts concluded within these systems have standard clauses which contain a clause on the applicable law. If this is the case, Article 3.1 in the Rome I Regulation is applicable instead. This problem makes it difficult to find a need for article 4.1(h) if it will only be applicable in exceptional cases. However, the legal position on this matter is still unclear since the Rome I Regulation has just been put into force.

Social housing in Northern Europe and the importance of social and political consideration in planning. Focus of the essay lies on the "burning suburbs" of France, based on literature studies combined with a study visit to Les Minguettes outside of Lyon..

This thesis has been carried out in New Zealand in collaboration with the University of Waikato. In association with Dr. Mike Duke the purpose of this work is to investigate whether two different software for modeling of photovoltaic systems are useful in the teaching of solar energy.The next ten years grid-connected photovoltaic systems are assumed to increase and therefore also a rising demand for people with engineering knowledge are to be predicted. For engineer students with a focus on solar energy a more practical teaching with design software´s can be a good method to make the students comprehend more when it comes to large scale photovoltaic systems and be more prepared for working life.The software´s used is called Transient System Simulation (TRNSYS) and Photovoltaic Systems (PVSYST) which are both well used throughout the world. To assess the reliability of the software´s, a reference solar power plant at 16.1 kWp installed capacity are used, which consists of photovoltaic modules from four different manufacturers.

Akademiska hus is a real estate company that specializes in providing Swedish universities with housing facilities for educational and research purposes. The company strives to reduce its use of energy by 40% between the years 2000 and 2025. The aim of this thesis is to determine which measures can be taken to reduce the need of purchased energy in a building that is used by theSwedishUniversityof Agricultural Sciences inUppsala.In order to determine the results of various changes to the building envelope and ventilation system, the building was modelled in the computer simulation program VIP-Energy. Other proposed changes to make the use of energy more efficient concerned water use and lighting. The need of purchased energy can also be reduced by producing electricity or heat on site, using solar energy.Results show that economically viable measures include upgrading windows and faucets, adjusting control systems for ventilation and lighting, and installing roof mounted solar panels for power production.

The company GEMS PET Systems produces cyclotrons which is a type of particle accelerator. The cyclotrons create log files that are analyzed by the company?s employees for different purposes like troubleshooting or installation. The purpose of the project is to with a usage-centered design method create a paper prototype of a tool that will help the employees to analyze the log files in a more efficient way than earlier.The result shows how the usage-centered design method was used to create the paper prototype and how the user interface was created according to human-computer interaction (HCI)..

This bachelor thesis in science Informatics contains the qualifications for the applying of IT in education for students in elementary school, grade 1-3. By empirical case study on an existing elementary school, whose success on IT use is noticed, describes how to apply IT in the classroom in an adequate way. We look at different theoretical frameworks in interaction and design of systems designed for learning purposes, and satisfies their specific needs and situations within the classroom's four walls. The current lack of statistical measurements on students' results and effects of the use of IT in teaching, prevents further improvements. If we simultaneously work to develop more well-designed systems that are designed for this purpose, it is possible that the effects become more and better.

Investment costs for eight different type Housing systems for dairy cows has been calculated in order to compare the building costs as a function of herd size, shelter type and automatization. A commercial calculation programme for building was used and complemented with prices of equipments specific for dairy cow building. Herd sizes were 120, 250 and 400 cows. The milking equipments were automatic milking system (AMS), parallel parlour with 32 stalls (2x16) and rotary parlour with 24 stalls. Shelter was either insulated equipped with automatic cable driven scrapers on solid alleys, automatic feed wagon on rails, or uninsulated with manual manure handling and a tractor driven mobile mixer wagon on a drive-through feeding table. Building cost per cow or per kg milk was calculated using an average life time and 6 % interest rate and annual milk yield is 9 500 kg/cow and year. Structure effect 3-4 % higher for an insulated structure than in an uninsulated for 400 and 120 herd respectively. This is much lower compared to what is normally argued.

Ethiopia is the country with most livestock per capita on the continent of Africa. There are 34.5 million cattle that are used for drought, meat- and milkproduction and 85% of the population rely on agriculture for their survival in some way. Milk is produced in four main systems, through pastoralism in the lowlands, in mixed crop-livestock systems in the highlands, in and near big cities with only one or two cows, and in intensive farming systems. There are 17 cattle breeds in Ethiopia and some of them are more suitable for milk production than others. Several environmental and economic problems arise from livestock holding in the country, for example overgrazing, low production due to feed shortage, low quality of the avaible feed and non-existing breeding programs.

When using the digital halftone proofing systems, a closer print match can be achieved compared to what earlier couldbe done with the analogue proofing systems. These proofing systems possibilities to produce accurate print match canas well lead to producing bad print matches as several print related parameters can be adjusted manually in the systemby the user. Therefore, more advanced knowledge in graphic arts technology is required by the user of the system.The prepress company Colorcraft AB wishes to control that their color proofs always have the right quality. This projectwas started with the purpose to find a quality control metod for Colorcraft´s digital halftone proofing system(Kodak Approval XP4).Using a software who supports spectral measuring combined with a spectrophotometer and a control bar, a qualitycontrol system was assembled. This system detects variations that lies out of the proofing system´s natural deviation.The prerequisite for this quality control system is that the tolerances are defined with consideration taken to the proofingsystems natural deviations.

Talented people are recognised as being the most important corporate resource over the next twenty years and a competitive compensation system is an important tool in attracting and retaining talent. Traditional pay systems are recognised as being neither cost effective nor motivating people to do more. Often these systems do not contribute to strategic objectives. This study outlines what constitutes an intelligent remuneration system that will enhance the mind value added by knowledge workers, reward knowledge creation, and contribute to organisational strategies..

In system development it is today increasingly common to use a model-based system development method. These methods that are suited for Agile work with simple and quick updates and implementations of new applications in systems conform to the requirements that are becoming more important today, namely more flexible and less expensive system that still maintain high quality and safety.A company that has been working with this type of system development method for a long time is Genicore AB, which also has developed their own tools and model language in order to better model the information management systems in complex and abstract operations. Genicore AB is trying to spread their method other developers and have therefore taken the initiative to start this study. The method is evaluated and tested by two students with relatively little experience in model-based systems engineering in order to gain a new perspective on how the method functions. The method has been applied to an educational activity in order to test it in a new domain, and this led us to our research question;?What criteria are of particular relevance in the implementation of a MBSD method on on complex businesses??Through literature reviews and interviews, we formed an idea of how model-based system development works from a theoretical perspective, and then continued to the case study conducted on the educational activities at the faculty of IT at University of Gothenburg.

En prototyp till en förarstol för det militära fordonet SEP har tagits fram av tidigare anställda på BAE Systems Hägglunds AB i Örnsköldsvik. Stolen måste uppfylla en omfattande mängd krav då den är tänkt att användas i ett stridsfordon, och av personer av varierande storlek. Den nuvarande prototypen för stolen anses dock vara för dyr och det har dessutom framkommit en del klagomål på konstruktionen. Stolen måste därför göras om så den blir både billigare och bättre. Genom att ta del av tidigare genomförda tester på BAE Systems, samt genom att göra nya tester upptäcktes det dels vad som var dåligt och därmed behövde göras om, och dels vad som var bra och kunde tänkas behållas.

This thesis conducts a comparative study between two academiclibraries, one Swedish and one English, in order to analyse ifdifferent funding systems influence the marketing of theirservices. The theoretic foundation is built on relationshipmarketing, which emphasises the importance of creating andmaintaining relationships. A qualitative approach has been usedthrough the use of case studies, with semi-structured interviewsbeing held with library staff and managers in both countries. Inaddition to these interviews strategic plans have also beenanalysed. The result from the study shows that whilst there aresome differences between the two university libraries there arealso similarities, which indicates that it is not clear if differentfunding systems have an impact on the marketing of the services..