Introduction: A general guideline was introduced on October first 2010 regarding a mortgage cap, limiting the degree of leverage of housing as collateral. Through the new guidelines the marked conditions concerning consumers? choice of mortgage has changed. The consumers are limited in the sense that they can?t only use mortgage when purchasing a house.

Most people have been forced to throw away a pot-plant after its death. There are many reasons to the death of a plant, but mainly it?s because its owner forgets it, and therefore fails to water it. The purpose of this project is therefore to develop a product which can prevent this from happening, while the product has to have a low manufacturing cost to be able to compete whit other, similar, products on the market. During the project, a benchmarking has been done to give a clear picture of what the product has to compete with. The directives there are for CE-marking, and which of these who concerns the product has also been looked up.

Föreliggande studie är en komparativ fallstudie där Antoine de Saint-Exupérys LePetit Prince och dess svenska översättning analyseras enligt Juliane Houses analysmodellför översättningskritik. Som jämförelsematerial till den svenska måltextenhar de två engelska översättningarna av verket använts. Syftet med undersökningenär att analysera effekterna av eventuella skillnader mellan den aktuella källtextenoch dess svenska måltext samt att genomföra och redovisa en fallstudie som eventuelltskulle kunna ingå i en mer omfattande studie av exempelvis barnboksöversättningarfrån franska till svenska. Originaltexten är avsedd för både barn ochvuxna och kan, om läsaren vill, på olika sätt tolkas symboliskt eller allegoriskt.Texten visar sig också ha en synnerligen välplanerad och koherent komposition,vilken till största delen har bevarats i den svenska måltexten, men några avvikelsersom påverkar kompositionen har dock påträffats. Även avvikelser som kan påverkamålspråksläsarnas förutsättningar att tolka en del av de symbolladdade orden harnoterats, liksom avvikelser som påverkar uppfattningen av relationen mellanförfattaren och läsarna samt mellan de fiktiva personerna i texten.

Today, maintenance is a big part of the daily life on board ships. It is also one of the bigger expenses a shipping company has and without any loss of quality tries to run as economically advantageous as possible. In the hunt for economical savings the shore-based industry has subsequently applied the use of condition based maintenance, CBM, were a component is maintained according to its actual state. This leads to a reduction of maintenance costs since no parts are unnecessarily replaced. However, within the maritime sector a periodical maintenance is still the most commonly used maintenance system.The purpose of this paper is to chart the factors that are the reason for the low implementation of CBM on board the Swedish merchant fleet's ships.

In the construction industry today there is a significant technological revolution goingon. New methods for automated processes and information management are developedcontinuously. Intense studies are currently taking place to ensure ways and means toembrace the new technology of BIM.At the present, environmental certification systems are considered cumbersome andchallenging. However, the increasing demands of sustainable development in the constructionindustry imply that the environmental certifications will not disappear. ThisMaster Thesis examines the possibilities to apply BIM technology within the field ofenvironmental certifications to streamline the processes.The applications that provide the best opportunities are:- To use BIM to be able to, during the design stage, dynamically evaluate the resultor score a certain building will achieve.- To avoid unnecessary work through collection of data for calculations directlyfrom a BIM-model.- To be able to automate certain time consuming calculations that are currentlyperformed manually.- To automatically examine the completed model to ensure that the demands arefulfilled.The possibilities to use BIM within these areas are however limited by the technologyitself.

The number of people in the world and the urbanization increases. This leads to a bigger need of space for the built environment, space that soon doesn?t exist. A large portion of humanity?s energy disposal is used for heating of buildings.

Lately, more and more music festivals have emerged in Sweden. People?s desire and need to visit these events only seems to increase. Cultural tourism and music tourism has developed into a significant and important part of the experience industry and it employs more and more people within the tourism industry. The purpose of this paper is to investigate which effects this can have on the local community.

Benchmarking is an established method of working which is often used in order to develop the quality of the organization. However, almost 70% of the organizations with benchmarking fail due to the lack of planning and structuring of the benchmarking exercise. Maintenance sections in the paper and pulp industry are one of those who have decided to conduct benchmarking. Therefore, the purpose of this study is to gain knowledge of how the maintenance sections in the paper and pulp industry deliberately structure and plan to use benchmarking as a driving force for quality development in the maintenance sections.The study is a hermeneutic case study. Telephone interviews and document analysis have been used as data acquisition methods.The results show that there is a lack of both planning and structuring in the benchmarking process, and lack of management commitment for quality improvements within industrial maintenance.

This report will discuss principle, primary and finally manufacturing structure. We were asked to produce a 3D milling to processing the prototype material that is used on the University of Halmstad. From conceptual drawings to produce components for this project have we together with a number of company take developed the right components for this project. We have calculated and analyzed the construction to get the best result for it purpose. Unfortunately have the process to produce the 3D milling has been stopped because of deficient budget and time.

Background: The global responsibility for multinational companies is a current matter of subject. Now when the world increasingly is getting globalized, economic growth is created, which brings a bigger demand of responsibility on companies. The leading companies from every industry is often becoming the frame for how the production process works and is therefore exposed to outer pressure which, for example, is coming from consumers and the media. Since consumers at present are more aware of what they are buying and where it comes from, it is important that the companies take social responsibility. We have therefore studied three big companies within the clothing industry to see in witch way they are taking their social responsibility.Purpose: Our purpose was to explore how companies within the clothing industry describe their work with Corporate Social Responsibility, code of conducts and where the incentive behind this work is coming from.Method: We have, through a qualitative study, examined how three large companies work with Corporate Social Responsibility.

Problem: Small companies dominate the skin care industry, and they also face moredifficulties, constraints and resistance in strategy implementation and sustainabilitywork than other operators. Still, the trend of sustainability strategies increasesignificantly precisely in this industry.Purpose: The purpose of the study is to contribute knowledge to the field ofsustainability strategies and motives for the implementation of them in smallercompanies who engage with skin care, in Sweden.Framing of a question: Why do some smaller Swedish companies in the skin careindustry choose to implement sustainability strategies in their business?Literature: The literature functions as a framework for the study and is considered toidentify the possible reasons why small companies choose to implement sustainabilitystrategies or not. The literature is collected before the empirical data.Method: This paper is constructed by a qualitative method approach. The empiricaldata were collected through interviews, by telephone, personal meetings and email,which were then transcribed and the interpreted by a model, which the authors havecreated.Conclusion: Smaller companies are often met by larger resistance and an until up tothe present slowly emerging industry with vague rules and controls as well as ancomparative knowledge of what is good and what is not.

Energy and environmental demands regarding buildings have become an increasinglydiscussed topic, both in Sweden and in Europe as a whole. The general trend indicatesthat greater efforts are being put into the energy efficiency of the built environment.There are already numerous examples of houses with a low energy demand, and thenumber of low energy buildings is constantly growing.At the time being, the maximum level for energy demands for housing in Stockholm is110 kWh/m2year, but as soon as next year the limit will be changed to 90. The Swedishagency Energimyndigheten is currently conducting a project to interpret the EU Directiveon the so-called Nearly zero energy buildings, and the preliminary results indicate thatthe level of requirements for purchased energy will end up with about 55 kWh / m2year,which is in line withtoday?s recommendationsfound in FEBY's Kravspecifikation förPassivhus.Starting with a low-energy house in Henriksdalshamnen in Stockholm, we have analyzedvarious energy-efficiency measures and their influence on power and energy needs. Thefinancial aspects associated with the measures have been studied using a model of lifecycle costs.The measures were initially studied individually to give an idea of how much impact theyeach had.

Apple has since their launch of the Iphone series created a billion dollar business with the market place Appstore. Third-party apps have disrupted the mobile industry, attracted a high number of developers and set the standard for the industry. Despite success, this market has yet not been the topic of any academic study, a fact that makes this thesis important. Under the assumption that apps can be regarded as a service, traditional service marketing theories have been applied with the research goal to map existing business models, evaluate revenue potential and understand best practices of marketing techniques. A series of qualitative interviews with representatives from the difference business models, backed by secondary data describing the domain shows how the Appstore has evolved over time and which marketing practices that appear successful.

The banking industry is a fundamental part of the economy in Sweden. Despite its importance, the competition and the concentration level within the Swedish banking sector is relatively unexplored. This paper aims to examine the development of the concentration level in the Swedish banking sector during a period of ten years, 2003 to 2013. The examined banks in the study are the four largest banks in Sweden; Handelsbanken, Nordea, SEB and Swedbank, and four selected niche banks, ICA banken, Ikano Bank, Länförsäkringar Bank and Skandiabanken. In order to examine the development in percentage change, there are six selected variables; loans, deposits and borrowings (both public and households), net interest income and return on equity, which are observed during a period of ten years.

This report will discuss principle, primary and finally manufacturing structure. We were asked to produce a 3D milling to processing the prototype material that is used on the University of Halmstad. From conceptual drawings to produce components for this project have we together with a number of company take developed the right components for this project. We have calculated and analyzed the construction to get the best result for it purpose. Unfortunately have the process to produce the 3D milling has been stopped because of deficient budget and time.