Time studies in dairy production are an essential tool when deciding about level of mechanisation and automatisation both in investment situation and improving efficiency in existing operations. In previous investigations such studies have been carried out during normal barn conditions during winter. Since there is a compulsory to have dairy cows grazing 3 to 5 months during summer time in Sweden time studies during this season is important to have a full picture of needed working time. During grazing season time studies was carried out at 14 dairy farms representing herd sizes from 66 to 450 dairy cows of which 6 farms with AMS. 8 farms were the same as studied during winter season.

Because society?s demand for quality, efficiency at low cost is constantly increasing, companies are increasingly choosing to invest new methods to achieve these points. Those who manage to find ways to improve their processes are often the companies that have the greatest chance of becoming a winning player in the market. BIM is a new method that can reduce the internal costs while increasing communications between different parties. However there is disagreement about what BIM is and its purpose.

Copyright is a part of the intellectual property rights. This ancient occurrence became during 19th century observed by the legislation. Great economical interests and values made it necessary to create rules concerning how the exploitation would take place. Several important conventions were created during this century. For example, the Parisconvention (1883) and the Bernconvention (1886).

This report is a study in voltagelevel in connection with regeneration of brake energy from the tramtype M31 in Gothenburg.In the act of braking, the tram M31 uses electrical braking where the electrical motors generates energy and if possible send it back to the overheadline, where other trams in the nearby can use this regenerated energy for its own driving force. In cases where no other energyconsumers are located in the same section, there is a resistance witch task is to convert this energy into heat. The regulation of this resistance appears to cause an increase in the voltagelevel into far too high levels.Investigations of the trams regulationequipment and its construction have been done. Further have measurements on the overheadline been performed in order to map the voltagevariations during a longer period of time.The result have been showing that the voltagelevel during regeneration often is as high as 880V-920V, more extreme values have not been observed in a large scale. The values are especially high compared to the nominal voltagelevel.

This report is a study in voltagelevel in connection with regeneration of brake energy from the tramtype M31 in Gothenburg.In the act of braking, the tram M31 uses electrical braking where the electrical motors generates energy and if possible send it back to the overheadline, where other trams in the nearby can use this regenerated energy for its own driving force. In cases where no other energyconsumers are located in the same section, there is a resistance witch task is to convert this energy into heat. The regulation of this resistance appears to cause an increase in the voltagelevel into far too high levels.Investigations of the trams regulationequipment and its construction have been done. Further have measurements on the overheadline been performed in order to map the voltagevariations during a longer period of time.The result have been showing that the voltagelevel during regeneration often is as high as 880V-920V, more extreme values have not been observed in a large scale. The values are especially high compared to the nominal voltagelevel.

This report is a study in voltagelevel in connection with regeneration of brake energy from the tramtype M31 in Gothenburg.In the act of braking, the tram M31 uses electrical braking where the electrical motors generates energy and if possible send it back to the overheadline, where other trams in the nearby can use this regenerated energy for its own driving force. In cases where no other energyconsumers are located in the same section, there is a resistance witch task is to convert this energy into heat. The regulation of this resistance appears to cause an increase in the voltagelevel into far too high levels.Investigations of the trams regulationequipment and its construction have been done. Further have measurements on the overheadline been performed in order to map the voltagevariations during a longer period of time.The result have been showing that the voltagelevel during regeneration often is as high as 880V-920V, more extreme values have not been observed in a large scale. The values are especially high compared to the nominal voltagelevel.

This report is a study in voltagelevel in connection with regeneration of brake energy from the tramtype M31 in Gothenburg.In the act of braking, the tram M31 uses electrical braking where the electrical motors generates energy and if possible send it back to the overheadline, where other trams in the nearby can use this regenerated energy for its own driving force. In cases where no other energyconsumers are located in the same section, there is a resistance witch task is to convert this energy into heat. The regulation of this resistance appears to cause an increase in the voltagelevel into far too high levels.Investigations of the trams regulationequipment and its construction have been done. Further have measurements on the overheadline been performed in order to map the voltagevariations during a longer period of time.The result have been showing that the voltagelevel during regeneration often is as high as 880V-920V, more extreme values have not been observed in a large scale. The values are especially high compared to the nominal voltagelevel.

This report is a study in voltagelevel in connection with regeneration of brake energy from the tramtype M31 in Gothenburg.In the act of braking, the tram M31 uses electrical braking where the electrical motors generates energy and if possible send it back to the overheadline, where other trams in the nearby can use this regenerated energy for its own driving force. In cases where no other energyconsumers are located in the same section, there is a resistance witch task is to convert this energy into heat. The regulation of this resistance appears to cause an increase in the voltagelevel into far too high levels.Investigations of the trams regulationequipment and its construction have been done. Further have measurements on the overheadline been performed in order to map the voltagevariations during a longer period of time.The result have been showing that the voltagelevel during regeneration often is as high as 880V-920V, more extreme values have not been observed in a large scale. The values are especially high compared to the nominal voltagelevel.

As stocks have become a more common way for people to save their money, the range of financial information has had a substantial increase. To understand the assumptions that stock valuation and analysis are built upon, it is important for the reader to have an understanding for the models that are used by banks and institutions when recommendations are published.The cash flow model, which is the most commonly used stock valuation tool, is based on CAPM. This model describes the relationship between an assets return and its risk in relation to an index. The risk parameter is called the beta value and has grown to be the dominating risk factor within financial economics literature.The use of beta values has been widely discussed in the world of academics and some researchers claim that the degree of explanation brought about by the beta is so low that it should be discarded, others are faithful to the beta and believe that it still serves a purpose. As a result of this criticism other ways to calculate the beta have surfaced, models that take other factors of risk into consideration.

AbstractToday, too many construction projects are delayed and deviates from the budget. Agood project management is the basis for successful construction project. The mostcommon planning methods in the construction industry is currently Gantt chart andCPM. The problem with these is that focus is only at the time of the project anddoesn?t handle the budget.

In this thesis, high quality adverts are examined from the perspective of the advertisement contest Guldägget. The study discusses award-winning advertisement, both in terms of content and design, according to Guldägget?s jury members, industry experts and various theorists. Semiotics is used to analyse Guldägget?s winning adverts.

In this study we have examined the possible quality standards and methods for applications with service workshops in the forest industry. The purpose of the methods presented here was to start the work of standarardising the maintenance service in the industry and be of use for service providers in their quality effort.The methods we used to accomplish the study were interviews and field visits together with a comprehensive literature research. Our results are presented in the form of four solution proposals: a standard based on existing SIS standards for terminology and key indicators, checklists that are filled in by mechanics with customer participation, the construction of a instructions database, and the implementation of the method 5s.We believe our suggestions can help the service providers in the four problem areas that we have identified: long term strategy, documentation, recruitment of competent technicians, and standard procedures in their operations. These improvements will be beneficial for both the service provider and the customer..

This study is about how a swedish brand within the food industry that experiences a crisis following a product failure. It focuses on three areas following the crisis and these are crisis management, recovery strategies and brand management. This study seeks to explain how these areas interact in relation to massive exposure to mass media and how they interact restore the brand's potential loss of reputation. This study was conducted as a case study with a deductive and qualitative approach. The data gathered to this study was mainly based on newspaper articles and complemented with semi-structured interviews with twelve local retailers of the brand..

 English abstract  The culture of hotel and restaurant work.Dangerous for apprentices and students?The study is based on a survey targeting 50 teachers at chef schools with good geographic distribution of 9 schools. Teachers answer questions on bullying and sexual harassment in the hotel and restaurant sector, and students practice shock in the meeting with the industry. Students face a hard and tough environment where it is expected that it will suffer a great deal of harassment and degrading treatment as part of a tradition. There seems to be a general but erroneous belief that the professional climate has improved.

This thesis investigates how inventory management is practiced at a Swedish sawmill company, how practice differs from theory in this field and how the company could make more use of this theory. To do this we have performed a study on relevant literature and compared our findings with a field study on Moelven Valåsen AB. Our analysis shows that a large gap between theory and practice exists. We identify several reasons to this, including some sector specific problems when calculating cost rate for timber inventories. Suggestions on solutions to these problems and an example of how a cost rate can be estimated with relatively simple means are presented.