The discussion about high culture and popular culture in our society has been going on for decades. In few places is it as loud as within culture journalism and the critics? society, where the question of what is good taste and what is dumb entertainment constantly gets brought to the surface. Film is a particularly vulnerable area, since it is such a universally appealing and rather young medium. In America and England several studies have been performed of the reviewing society and reveiwers? use of high and low art-discourse in their writing.

The purpose of this study was to investigate if preferences for high- and low context communication differed significantly between individuals from individualistic and collectivistic cultures, living in a multicultural environment. A quantitative survey was used as method and the survey was answered by 150 students at Jönköping University and Uppsala University. Two self-assessment scales, obtained from previous studies were used to measure the degree of the two cultural dimensions and communication styles. Two multiple regression analyzes were performed to investigate the connection between collectivist cultures preference for high context communication and individualistic cultures preference for low context communication, that has been found in previous studies. Two ANOVAs were also performed to investigate differences in communication style depending on sex and length of stay in Sweden.

The purpose of this report is to collect, compile and complement the scientific and experience based knowledge concerning high pressure fire fighting today. The goal is to produce a decision data for the Rescue Service concerning the use of high pressure systems for fire fighting. Focus is on hose reel high pressure systems but other systems are discussed too. The report begins by describing the technical properties of the different systems. Then the fire fighting properties are evaluated, including manoeuvrability and safety for users.

In the process laboratory of Metso minerals (Sala) AB, continuous tests have been made with a laboratory unit High-Rate thickener. The tests are made in order to compare three methods of thickening techniques of suspended solids. The three techniques are High-Rate thickening, conventional thickening and lamella thickening. The High-Rate and the conventional trials are based on a continuous method, while the lamella thickener is based on batch trials. Because the lamella thickener is based on batch trials and there were some optimization problems with the adding point of the flocculant at the continuous trials, it was not feasible to compare the lamella thickener with the other two thickener types.

Injuries to the suspensory ligament represent a huge problem in equine veterinary medicine. As many of the affected horses are elite-competition athletes, there are high expectations on veterinarians to make these horses fully functional again. The suspensory ligament has several features which makes the healing process complicated. So far no treatment has shown to optimize the healing process. This has led to the testing of many new treatment methods, in order to find a consensus for the injury.

With today`s business world, it is very important to deliver the right product with right quality and quantity at the right time. By ensuring that the staff are happy and have the opportunity to work in a workplace with good structure, the company will be able to reach these parameters and at the same time maximize the efficiency.The project has been carried out at Stena Stål AB in Värnamo. The company's main task is to cut, store and deliver production steel and tool steel to processing companies in the surrounding region. Stena Stål AB in Värnamo is one of total 21 companies in the company group Stena Stål. Stena Stål is a part of the Stena corporate group which owns a total of eight different company groups that are spread in about 250 different locations in 14 countries.The purpose of this report is to give Stena Stål AB in Värnamo suggestions on how to design a new facility for tool steel.

This degree project has been carried out by Oscar Adolfsson and Marcus Blomqvist, during the spring of 2010, both studying to become Bachelor of Science in Innovation and Design Engineering, at Karlstad University. The degree project includes 22,5 credits.The work is done on behalf of Etac Supply Center AB in Anderstorp. Etac is a company developing and manufacturing home health care products, with operation in Sweden, Norway, Denmark, England and Germany, and with sales worldwide. Bo Lindqvist, R & D manager has been the contact person at Etac.During the project the students has had a workplace at Semcon Caran AB in Karlstad. Semcon has also been helpful as a sounding board.The objective of the work has been developing a new, wall mounted shower chair, assigned for persons with difficulty to stand up while showering.Etacs requirement of the shower chair is that it should be able to support a user with a weight of 100 kg, the chair shouldn?t have any outrigger, optional should be armrests and backrest.

The industrial sector accounts for a large share of greenhouse gas emissions. To reduce its negative impact on the environment is crucial in the quest for a sustainable future. In discussions of the industrial sector's impact on the environment guidelines have been highlighted as a tool to assist the industries in their efforts to change the relationship between the consumption of energy and production. This by improving energy efficiency and a shift to the best available technology. During the past 30 years the steel industry has reduced its energy consumption per ton of steel produced by 50 percent.

This study will analyze and interpret the performance art piece The Last Strawcreated by the artist group High Heel Sisters. The aim is to search for potentialfeminist strategies in their deconstructive ways of incarnating gender and bodiesusing the notion of performativity and phenomenological theories.My study shows that the diversity of this art performance creates a complex platformwere discussions about gendered corporeality and spatial power relations are beingnegotiated..

Stålindustrin förser såväl människor som samhället med många nödvändiga byggstenar. I Sverige finns tolv ståltillverkande anläggningar och hela 80 % av stålet exporteras. Som alla andra tillverkande industrier har den flera miljöaspekter att ta hänsyn till, men stålets nytta väger tungt och därför är det av stor vikt att genom forskningsprojektet Stålkretsloppet nå hållbar utveckling. Miljöskyddslagen, miljöbalken och ett ökande miljöengagemang har lett till arbete med miljöfrågor. Syftet med den här studien var att undersöka hur allmänhetens riskperception, attityd och oro gentemot stålindustrin ser ut.

The purpose is to analyze if the students have any use of their computer education at a senior high school level or if there is a demand for them to proceed studying. Does the students background have any importance or is it their own motivation that makes the student advance to higher education.In this report we ask ourselves the question, if the students have any use of the knowledge gained at senior high school in computer studies at a higher level. Do the students have any chance for employment based on their senior high school grades in computer studies after graduation?  Do the schools that follow the senior high school guidelines within programming and databases give these students an advantage towards those that have not received the same fundamental education?The method used for the survey is a group questionnaire.  The questionnaire was distributed at one and the same time and then collected to examine the results. The survey results showed that students who seek work based only on their senior high school grades, received only a temporary position for different lengths of time.

AbstractThe tests work is about the subject "synergism of steel and concrete."The construction sector is in a strong competition and the different companies in the PrefabMarket has ever tried to develop new design solutions that are efficient and environmentallyfriendly.The purpose of this report is to highlight different aspects of interaction and size up a columndimension and to examine its efficiency and load capacity as Eurocode 3 and Eurocode 4. A sizing chart that describes the relationship between the torque and normal force shouldalso be made of the interaction . .

This is a technical report about cement stabilization in general and the stabilizationprocess during the construction of a warehouse in Halmstad, Sweden in particular and iswritten at the section for economy and technology at Halmstad University incollaboration with NCC Anläggning.NCC encountered variations in compression strength in the stabilized material on the firstwarehouse that they constructed for the company Biltema. In our report we used thestabilization process of the second warehouse for the same company as a reference todetermine what could be done to get a more homogeneous result for future projects.We also looked in to what testing method is the most suitable to determine the result ofthe stabilization.After interviews with people involved in the process and visits on the work site we havecome to the conclusion that the most probable cause to the variations in compressionstrength is segregation in the ballast material. This segregation can occur in severaldifferent occasions in the process such as during the production, transportation andhandling on the work site.Other causes for the variation can be improper compaction, overlapping stabilization insome places and different duration of hardening of the samples that are tested.The best way to do in situ test of the stabilized material is to do seismic investigations asthose are non-destructive tests in comparison to taking core samples and you can discoverany cracks or air bubbles in the material..

With knowledge of how the southern Swedish forests have been affected by storms the past years, this study intended to find out which factors affect the storm firmness of a stand the most. The study was based on data from stands in the, by the storm Gudrun, affected area. The results of the analyses that tested the stand factors that influence the amount of storm damage to the greatest extent showed that the storm sensitivity of Norway spruce stands were largely due to previous management actions. The factors that could be controlled by thinning and had relevance of storm damage standpoint, according to the results were; the dominant height, volume, basal area weighted mean diameter and stand age at last thinning. In this study, these results are not as clear for Scots pine.

Vi har valt att undersöka vilka möjligheter och eventuella risker det finns att bygga högt i Stockholm. Undersökningen utgick på att jämföra olika byggtekniska lösningar för stomsystem. Hur tar stomsystemen hand om vertikala och horisontella laster? Vilket stomsystemen är lämpligast vid en viss höjd? Dessa är några av de frågor som besvaras i arbetet.De vertikala och horisontella lasterna är de faktorer som främst försvårar höghusbyggandet. Med en större belastning av laster ju högre det byggs måste stomsystemen dimensioneras med allt större noggrannhet för att lasterna ska nedföras till grundläggningen på ett säkert sätt.