The demand for environmental assessments on buildings and energy consumption is increasing as well as the energy performance requirements for buildings. At the same time it is increasingly common with self-producers of heat and electricity generation.The main purpose with this master thesis is to investigate how time resolution affects the environmental assessment of energy consumption in office buildings connected to district heating (DH). Environmental assessments were done with both attributional LCA and consequential LCA with system expansion.Fortum´s DH system in Stockholm was analyzed and district heating production was simulated in a Matlab-model. Greenhouse gas (GHG) emissions for the production were calculated. The heat demand of the office Gångaren 16 in Stockholm was simulated in IDA ICE.

The Smart Grid technology has during the last decade been established as a way to create a greater flexibility on the electricity grid that will be needed as the development moves towards an increased share of renewable primary energy sources in the electricity production. One part of the Smart Grid technology is the ability to shift loads in time, to adapt to either price or emissions, known as Demand Response. This project, which was conducted at KTH in collaboration with the consulting corporation Capgemini, examines the economic, environmental and social aspects of the Demand Response technology. In the project, three household products are used in a model that derives the potential savings in costs and emissions of CO2e. The results show that the actual savings measured in SEK are small, but that the savings measured in percent can be as high as 20 percent. Reduction of CO2e emissions is slightly lower.

After parturition the energy demand for milk production is greater then the energy provided from the diet. The cow mobilises therefore body tissues to compensate for the energy loss. Live weight and body condition scores decreases as a consequence of the mobilisation. The aim of this study was to analyse the relationship between body condition score, live weight and subcutaneous fat depth measured by ultrasound and the changes during the lactation. Possible differences between Swedish Holstein (SLB) and Swedish Red and White Cattle (SRB) were also investigated.

The aim of this essay is to analyze how food and meals produce and reproduce values and power relations and how these processes are portrayed in Virginia Woolf?s To the Lighthouse. Using sociological writings in the field of food consumption and production I study the structures that affect our relation to food and eating. This perspective is combined with a phenomenological view, aiming to examine how food is perceived, which is also inspired by queer theories. Using the method of close reading, the theories are applied to Woolf?s work.

This study was made for the Swedish forest company Sveaskog because the sawmills they delivered timber to had noticed a high frequency of bucking splits in their products. Coworker Jim Edström at Sveaskog also wanted to know if there was a big difference between different felling heads. The purpose with this study has been to find out the amount of bucking splits and if there is any felling head brand that did a bigger damage that the others. The study was made in two steps, where the first part was a literary review to find out results and conclusions in earlier studies. The best measuring method to check bucking splits was the known ?trissmetoden?.

In a world where digital media is becoming a greater part of people?s everyday and working lives it is plausible to assume that the upcoming generation of pupils expect the teaching media to adapt thereafter. It is this assumption of an increased demand that Natur & Kultur is hoping to be able to meet. This thesis has been a stage in the process of producing digital material in the subject of mathematics for high school students. Specifically the aims of this thesis have been to make a rough description of the largest competitive companies? products within the same market, explore and put together a brief theoretical foundation of contemporary research and produce concrete examples of ideas for digital applications.

During year 2004 Ålö AB made significant change in their production process. The production of front loaders is nowadays highly automated with short operation times. To be able to control their process in a better way Ålö recently decided that they needed a tool for simulation of their production and to shift patterns. This final thesis started with a pilot study in Ålö?s factory in Brännland.

Vilken strategi ett tillverkande företag arbetar efter kan variera och bero på en mängd olika faktorer. En effektiv tillverkning kan bli komplicerad när marknaden efterfrågar allt mer skräddarsydda produkter med varierande egenskaper. För att bemöta denna typ av komplexitet finns en rad strategier och modeller som har fått global spridning. En av dessa strategier är lean production, ett begrepp som vuxit fram utifrån studier genomförda på den japanska tillverkningsindustrin.I denna studie undersöktes varför lean production valdes som styrningsfilosofi i ett svenskt tillverkande företag, vilka förändringar detta inneburit samt vilka åsikter som fanns kring förändringsarbetet. Insamling av empiri har skett genom att genomföra en fallstudie på företaget Trioplast Sifab.

The Smart Grid technology has during the last decade been established as a way to create a greater flexibility on the electricity grid that will be needed as the development moves towards an increased share of renewable primary energy sources in the electricity production. One part of the Smart Grid technology is the ability to shift loads in time, to adapt to either price or emissions, known as Demand Response. This project, which was conducted at KTH in collaboration with the consulting corporation Capgemini, examines the economic, environmental and social aspects of the Demand Response technology. In the project, three household products are used in a model that derives the potential savings in costs and emissions of CO2e. The results show that the actual savings measured in SEK are small, but that the savings measured in percent can be as high as 20 percent. Reduction of CO2e emissions is slightly lower.

Given that the end-customer has become more demanding, the retailer has to deliver products according to the market demands, which have forced manufacturing companies to constantly search for new opportunities to reduce costs and improve efficiency. It is, therefore important to choose suppliers that are able to compete with the market demands.The market demands in the textile industry have lead to shorter product life cycles, which have caused manufacturers to deliver flexibility with high technology to compete successfully on the global market. To achieve the market requirements the underlying factor is to be aware and optimally use and control time. New technology can have a major influence in the production development, if the company choose to take benefit of the advantages, by optimal allocation of the internal resources the productivity and efficiency will increase, to accomplish a competitive advantage. One way to achieve this is by investing in a Unit Production System.In our thesis we have questioned what the main driving forces for an apparel manufacturing company is when it chooses to invest in new technology.

The purpose of this master thesis is to investigate how nearby forests affect the energy production in wind turbines. To reach the purpose a case study is performed on three wind turbines sited on a field in a north-south line at Andersfält in the municipality of Halmstad, Sweden. Approximately 100 meters south of the southern wind turbine a forest is situated. The case study is divided into three sub studies where the difference in energy production, the affect of the forest and a wind meteorology model, WAsP, is studied. The result show that the forest have a significant influence and that the WAsP-model gives an incorrect result of the energy production in wind turbines sited near a forest..

This thesis evaluates the environmental performance of six different fish farming systems. The thesis is part of the network group ?Hållbar fiskförsörjning I Stockholms län? (HFFS) which tries to increase the domestic and regional production of fish in Stockholm and move to a more sustainable supply in the Stockholm county. Two of the chosen systems; pangasius from Vietnam and salmon from Norway are delivering a substantial part of the fish consumed in Stockholm today, although they are very different when it comes to system characteristics. One system, arctic char with conventional feed, is produced in a fairly small scale in the north of Sweden, while the three remaining systems are viewed upon as possible options to supply Stockholm with fish in the future.

Mastitis, inflammation in the udder tissue, caused by S. aureus is a big problem in dairy cattle production. It causes suffering for the cow and curing or replacing the infected cow is costly for the farmer. It is known that beef cattle also suffer from mastitis caused by S. aureus.

Bioethanol is one alternative energy fuel that can be produced from different types of biomass. Second generation bioethanol comes from fermentation of lignocellulosic material and can be seen as a more environmental friendly alternative as e.g. forest residues and agricultural by-products are used. To be able to use lignocellulosic biomass in ethanol production, it has to be subjected to different treatments first. In this study, aspen sawdust was used as lignocellulosic material.

Heifer?s growth may be divided into three main phases: calf period, puberty and pregnancy. When the heifers are about three months old a critical period begins. This period ends when the heifer reach puberty and have her first oestrus at around 9-12 months of age. In the critical period the mammary gland starts to grow at a fast rate and Insulin-like growth factor-1 (IGF-1) transport the growth signals to the mammary glands.