AbstractThe assignment were assigned by Camatec Industriteknik AB. Camatec is a Karlstadlocated consulting company, they make everything from pilot studies to complete projects in mechanical design and calculation. They even have their own patented product, Camcoil. It is a winder for steel strips and is used for example with hardening of the steel strip. The assignment has been to solve the problems encountered by some customers within this product.

The purpose of the study is to examine, describe and analyse how a selection of parents to children with Asperger syndrome understand, experience and cope with their parenthood. To attain this purpose we focused on these following questions;How does the respondents view their parenthood?; What kind of strategies does the respondents use to cope with their parenthood on the basis on their child with Asperger syndrome?; How does the respondents experience the mesosystem interact with them regarding situations contenting strenuous and stress?We chose to do a qualitative study by conducting separate interviews with eight parents to children with Asperger syndrome. Then we analyzed the answers using an abductive research, we tested the empirical data against our choice of theoretical perspectives. The results shows; that several of the parents in the study have experiences of high strenuous and stress in combination the several roles their parenthood contained.

This report discusses a method to detect divers in harbour environments usingpassive acoustic detection. The goal was to achieve as high detection as possiblewithout having too high false alarm rate. A short execution time was also desirable.By using the characteristic of an inhalation a band-pass filter was applied to the signalto improve the signal to noise ratio. After the filtering an energy estimation of thesignal was made. This energy estimation was later used in a frequency analysis, whichcould tell us if there were enough energy in the frequencies that correspond to adivers breathing frequency.

My essay deals with a problem in our society which, in my opinion, has been neglected. Even today in 2011, the quality of schools and preschools is extremely varied. This has been a problem for a long time and not nearly enough attention has been paid to it.In my essay I have tried to understand what it is that causes these differences in quality between preschools. With help from literature and research studies I have examined what quality in preschool really means.My starting point is an account of my own experience at the preschool where I currently work and a description of a study visit I made to another preschool which operates in a very different way to the one where I work. I wanted to investigate what the consequences are for children who grow up attending preschools of different quality.

In the year of 2011, the new CEO of AB Volvo announced a major reorganization. This reorganization was a contributing factor to the start-up of this thesis.Volvo Group Logistics Services (VGLS) is Volvo Group?s global logistics partner, which designs, manages and optimizes all of the group's incoming and outgoing logistics flows. With the reorganization, VGLS started a project regarding responsibilities around railway flows. Within the project a demand to collect logistics requirements occurred.

Abstract: Elite soccer in combination with education is a unique and demanding task. The path towards a glory career in sports takes hard mental and physical training. The objectives in this study are 6 elite focused high school students studying high school education programs in combination with football profile. They are 3 of each gender. The purpose of the study was to find out more about their perspective of motivation and what makes them keep going towards a career in football in beside their education.The study is of empiric hermeneutic survey used qualitative method and interviewing to collect data.

Author Cocitation Analysis (ACA), multidimensional scaling (MDS) and Social Network Analysis (SNA), has been used to analyze and visualize the invisible college of the journal European Union Politics. The concept invisible college was first introduced in the fifteenth century, through the creation of the ?the Royal Society of London?, and it was reintroduced in the 1960:ies and the 1970:ies by scholars such as Price and Crane. It is said to have been interpreted in as many ways as there are authors who have used it. Here it has been used synonymously with the term citation network.

The Multispectral Canopy Reflectance Model (MCRM) by Kuusk (1995) has beenused to simulate the reflectance of a sugarbeet canopy. The simulated reflectancevalues show high absorptance in the VIS area, compared to field measurements, andhigh reflectance values in the NIR area. The errors may be due to overestimation ofclorophyll content in the sugarbeet leaves and scattered light during fieldmeasurements. The estimation of the clorophyll content where carried out using thePROSPECT-model by Jacquemoud & Baret (1990).During the vegetation period, the state of the canopy moves towards a closed canopy,with sparse vegetation in spring. The MCRM-model was used to perform a ?spring?simulation, which was compared to the original simulation.

In Sweden the real estate sector accounts for 33 % of energy consumption and just below 10 % of the emission of carbon dioxide. As a consequence of the external pressure from climate change it?s in everybody?s interest to reduce the energy consumption and thus reduce the emission of carbon dioxide. An additional incentive to reduce the energy consumption is the substantial increase of the energy price since the deregulation of the electricity market in 1996.In this study the techniques that exist to build multi-storey residential buildings with high energy performance will be investigated. Further the study intends to investigate the optimal energy performance from a real estate economic perspective.In order to investigate the optimal energy performance a model has been created with the parameters investment cost, rental revenues, operation and maintenance cost, discount rate and investment horizon.The result shows a relationship between a high investment cost and a high energy performance for newly constructed multi-storey residential buildings.

This literature review summarizes available data on infection with the parasitic roundworm, Ascaridia galli, as a cause of disease in poultry, including the consequences of a conversion to alternative production systems. Ascaridia galli has a direct life cycle with resistant eggs that survive and are easily spread in the environment, especially in systems with bedding materials where the faecal contact is high. The infection is usually subclinical but depending on the infection dose, the symptoms range from weight loss and diarrhea to mortality. Factors such as the feed composition and genetic variation among different hybrids clearly affect the establishment rate of the infection. Ascaridia galli will probably become an increasing problem, with a shift from the traditional battery cages to alternative systems where the risk of re-infection is high.

This degree project has been carried out in cooperation with Gedevelop in Helsingborg.Gedevelop has developed a camera that can calculate the weight of a liquid glass mass.Because of the density and viscosity changes in the glass, the weight information issometimes incorrect given. Glass industry is today addressing the problem by an operatorperforming a manual weighing of a few bottles which, in turn, calibrates the camera system.The project aimed to develop an automated system to control the weighing of glass bottles forglass industries. This system must be so flexible that it can be easily mounted on plants withdifferent production equipment around the world.The project includes design and construction of equipment that meets the requirementsformulated together with Gedevelop. Work has been done both in Halmstad and Helsingborgand has included both calculations and review of the theory to understand the forces thatinfluence the design of different construction parts. A prototype was produced that meets theoperating requirements for the design and can be used in testing features.

This report is about helping Q-Med AB in Uppsala to start its implementation of uncertainty of measurements analyses in their manufacturing department. Prior to this, the company relied solely on personal experience or did not take this uncertainty into consideration at all during different kind of measurements, which means that some of the processes that the company previously believed were within specified acceptance limits, will actually fail when considering these sources of uncertainties.Q-Med AB needed some sort of instruction to help the company, in a systematic way, to investigate different types of disorders that are affecting all kinds of measurements. This instruction includes a short summary about measurements and uncertainty of measurements in general and a detailed procedure about how these uncertainties are going to be handled in their daily work.The goal was to be able to use this instruction to systematically locate, eliminate (when possible) and analyze all kinds of disorders when measuring. Q-Med is using a lot of different types of instruments when measuring different types of quantities, including temperature, mass, pressure and density. This instruction will hereafter be used for every instrument, regardless of quantity and type of instrument.The instruction is tested through 4 different kinds of measurements, for mass, temperature and humidity.

Corporate Social Responsibility (CSR) is a topic that is becoming increasingly important in today's society. CSR is a concept whereby companies voluntarily integrate social and environmental concerns both in their business but also in interaction with their stakeholders. The society of today sets high expectations for how companies take their social responsibilities, especially in industries where the risks to individuals and the environment are high. In this study, we tried to answer the following questions; what kind of responsibility do companies in the plastics and chemicals industry claim to take and why might this be due? What differences exist between the investigated companies in the industry and what may these differences be rooted in? The purpose of this study was to obtain an understanding of the interest in working on sustainability in the plastics and chemicals industry.

In Sweden, the labour movement historically had influenced both society and politics. In recent times, it is considered a change in society with a stronger employer party while the unions weakened by reduced unionisation. This study aims to highlight the presence of individualistic and collectivistic approaches to the labour market in relation to union density. The different approaches are investigated in the labour market by means of a quantitative survey. The study's survey items are workers in the timber industry.

The objective of this thesis was to get more knowledge about how to design a dairy farm reducing the working hours and the work tasks whit high work load. I will try to reduce the working hours and the tasks whit high work load on my own farm witch I am about inherit. Today, the old stanchion barn has room for about 60 cows and 74 young cattle and need two men to run it every day. The total acre is 188 hectare, 100 hectare forest, 65 hectare farmlands and 23 hectare natural pasture. I have studied two solutions. In the first solution, I will use my old barn for young cattle and build a new barn for the cows.