In the social sciences, geopolitical theory is used in order to analyze states actions and commitments when it comes to foreign policy. This thesis develops a new understanding of geopolitical theory. Firstly, the development and application of geopolitical theory, from its foundations in the early twentieth century to contemporary geopolitical studies is discussed. Secondly a revised understanding of the variables integrated in the concept and how it can be operationalized as an analytical tool is presented and tested empirically.The critical assessment of the research field of geopolitical theory tells us that six different geopolitical perspectives have been considered the most influential (room, strategy, power projection, identity, affiliation and governance) when it comes to analyzing state action. This model is applied as an analytical tool and thus tested on a single case.

The purpose of this study was to use qualitative interviews with students at Södertörn University to find out what drives the men who begin to study for preschool teachers, how they are treated and how they are influenced by others. I also wanted to find out what the informants believe is the cause to why so few men apply to the program and what they think need to happen to change this.This is a qualitative study based on the selected students' experiences. In order to get different perspectives, I chose to interview three students and former students. One of them chose to terminate their studies after half the time, the second is at the end of the program and the third graduated a couple of years ago and has been working for a while.I originated in the theory of ethical concepts of gender, gender contract, "token" and hegemonic masculinity. Previous research addresses that the perception of men in pre-schools can look very different.

The company Olofsfors AB manufactures drive belts for forest machinery, known as ECO-Tracks, and abrasion-resistant steel and cutting edges for graders, excavators and tractors, known as Bruxite and SharqEdges. Manufacturing these products requires the steel to be heated and molded, then submerged in water and hardened. The water used in the hardening of steel is pumped to the process from pits below the floor and then pumped back to the pit after it?s been used. Since the temperature of this water rises after being used to harden the steel the temperature of the pumping pit needs to be adjusted to maintain its setpoint of 21°C.

Gender equality and gender equality work is relevant for today's working life, and previously male-dominated occupations may be increasingly under pressure to become more equal. This paper aims to explore and understand how the firefighters at a station are experiencing gender and gender equality in rescue services.Using theories of how sex is done, how a power perspective and a structural approach can show men's and women's different conditions in an organization, and theories that are more specific to gender and change management the firefighters talk about gender and gender equality are analyzed. Essay results were collected through interviews with seven firefighters and then analyzed and interpreted with the help of theories.The analysis shows that there is a perception among the firefighters that men and women are biologically different and that required physical strength legitimizes the exclusion of women. Inequality is seen as something natural and by pursuing an active gender equality women are given unwarranted benefits. When physical strength becomes a legitimate reason for exclusion, the responsibility for gender inequality is put on women and that women don?t have what it takes.There is also a resistance against gender equality analyzed in the paper, and it's stated opposition seems to be directed against the management's way of recruiting women.

AbstractThe aim of the thesis was to examine some older people's experiences of everyday life and how it is to grow old in Namibia today. Because everyday life is a broad concept, we chose to focus on some specific parts of everyday life. These are chores, family, work/education, elderly past and present and the government/society. Furthermore we chose to look at the similarities and differences between the experiences on the basis of gender, race/ethnic groups and class.We chose to use a qualitative research method and to be inspired by life stories. We used a semi-structured interview guide and interviewed six people between 70 and 89 years.

Our society has faced monumental changes and therefore our working life has changed as well. We are now in the twentieth first century and still our labor market is gender-segregated. Today networking is an important part of working life and one cannot emphasize enough the importance of having good connections in your network. Networking is now seen as an important tool when it comes to your career. In the past networking has been the men?s arena and it has almost been seen as a male institution.

The aim of this study was to understand how social workers perceive and understand violence and threats of violence from clients, and how it effect their working environment. It seems that the respondents understand the violence and threats of violence from clients as a result of the clients background problems, vulnerability, dependency and from ?the reason" that the client is currently in the contact with the organization. How respondents interpret the client´s behaviour based on the above-mentioned factors, seem to determine how the respondents perceive and define the violence and threats of violence by clients directed against them. Interestingly enough, although all respondents in the study experienced violence and threats of violence from clients, none of them perceived themselves as exposed at work. The answer to this is consensual.

ABSTRACT Essay in political science, C-level by Chris Baldebo spring semester 2010. Tutor: Arne Larsson. ?Women?s conditions in municipal politics in the municipality of Karlstad - Six politicians tell?.  The purpose of this paper is to explore women?s conditions in the municipal political work in the municipality of Karlstad.

This thesis has identified and studied measures to allow for reduced use of electricity in a waste incineration plant in western Sweden. The energy extracted from the waste at the powerplant is utilized and sold in form of electricity and heat. Technical and environmentally the combined heat and power plant is by today's standards among the leading waste incineration plants in the world. The owners are constantly striving to improve the efficiency of the waste incineration plant. They have seen the opportunities for savings in reducing internal usage of electricity.

This thesis was performed at Scania?s purchasing department of non-automotive products inSödertälje, Sweden during spring 2007. The management of the purchasing department ofnon-automotive products believe that their internal customers might not have fullunderstanding of what the purchasing department does. This is a problem because the internalcustomers might not use the contracts negotiated by the purchasing department or they mightnot involve the purchasing department when making purchases.The purpose of this thesis is to examine if and how the internal customers? perception deviatesfrom the purchasing department?s perception regarding the task of the purchasing department.And also to create a communication package with the purpose of increasing the internalcustomers understanding of what the purchasing department does.

The division of Electricity at Uppsala University runs a project called Lysekil project, they have designed a buoy that uses the waves to create electric power from a generator attached to the bottom of the sea.Uppsala University is closely connected with the company Seabased and the university makes use of their facilities in Lysekil. When they designed the buoy issues occurred, the geometric design was flawed, brackets with a short shelf life and it is generally uneconomic.A study visit was done in Lysekil on Seabased facility. With this visit the project started, which is to improve the design of the buoy and the attachment of wires leading to the generator. In this project we have chosen to use a beam system with three beams that are attached to the buoy. Then a wire attached to a plate that sits between the beams will be leading to the generator. Two proposals for construction are created, what distinguishes them are the brackets between the beams and the buoy.From these constructions, the design that is considered most optimal for our project is chosen.All parts of the buoy have been modeled and the drawings are designed in ProEngineer software.The two constructions are compared with each other, but the whole focus is on the second and final structure. The report begins with an introduction describing Lysekil project, and a task description of our project.The project aims to produce an optimal buoy that will be easy to design, materials restrictive with good durability and an economical solution.Wave power true function has been studied, mechanical and finite element analysis of beams, buoy and plate design.This has been presented in this report, where in the various chapters can read more about the processes. Although the relevant facts and information on this project and buoy development is included.

Purpose: To explore how the changes in work life, here represented and depicted through the concepts of knowledge work and knowledge worker, have been incorporated in the official psychosocial work environment discourse in Sweden. Methodology: Critical discourse analysis, contrasting the official psychosocial work environment discourse to literature on knowledge work and knowledge worker, to explore how employees, employers and their relations are constructed within these two discourses; focusing identity, autonomy and power. Using the constructions to make visible how they are articulated, used and dealt with in a real life case from the Work Environment Authority. Theoretical perspectives: Our social world is socially constructed and language is the main tool for constructing it. Discourse analysis is thus not just a tool for deconstructing texts but also for enhanced understanding of our construction of the world and our ability to communicate about it.

Övertoner orsakade av varvtalsstyrda motordrifter ger problem i industrisystem. Syftet med studien är att identifiera problemen och ge rekommendationer för att undvika dem. Studien utfördes som examensjobb på KTH för konsultföretaget Ramböll. En litteraturstudie i ämnet kombinerades med elkvalitémätningar på drifter hos Sandvik Mining.Elkvalitéproblem orsakade av varvtalsstyrda motordrifter kommer till stor del av att frekvensstyrningen ger olinjärt strömuttag som, om nätet inte är tillräckligt starkt, påverkar spänningskvalitén. Problemen kan vara driftstopp, störd utrustning och ökat slitage på utrustning för att nämna några.Denna studie visar att vid ändringar i system innehållande övertoner kan framtida övertonshalter approximeras för vissa fall.

AbstractElectricity consumption is a globally increasing problem caused by the high share of electricity produced in coal power plants. These contribute to high carbon emissions when only about 1/3 of the heat generate electricity and the remaining 2/3 of the heat cools off. Combined heat and power plants (CHP) have high efficiency because they use the residual heat for domestic heating. The CHP plant often use fuels from renewable resources, giving them a lower carbon footprint, but are also depending on the heat demand. If electric powered products such as drying cabinets convert to heat powered products more environmentally friendly electricity will be produced by CHP plants, which can supplant electricity, produced from coal power plants and reduce carbon emissions.

This thesis work has been performed at the department of diagnosis and dependability at Volvo Car Company, Torslanda. The background of this project is based on interest in ascertaining how different factors possibly can affect a diagnosis method, which has been developed to find leaks in the fuel tank and evaporation system. According to the OBD II requirements leaks with an orifice diameter larger or equal to 0,5 mm, must be detected. The idea of the diagnosis method is to create an over pressure in the system with an air-pump. The current through the pump is measured and correlates to the power consumed by the pump.