With the elevated oil prices of today it is necessary to look for other heating alternatives. If the oil price continues to develop in the same way it has done the last years it will soon be impossible for many producing garden companies to survive. The purpose of this diploma work is to compare three different fuel options in order to find the most economic one considering the conditions of Katrinebergs Handelsträdgård AB. In relation to oil it is profitable to change to any of the three alternatives: wood chips, wood pellets and grain. The most profitable option is to change to wood chips. This alternative has a payoff time less than three years and after that the annual saving compared to the oil is relatively high. The annual cost is 65 % of the cost of the oil alternative.

This thesis has been carried out in collaboration with LEDtec International AB. LEDtec focuses on innovative solutions in LED screens. Everything from large advertising signs to welcome signs in cities, to screens indicating speeds or warning of heavy traffic. The task was to was to help them develop a new version of the control board that is used in some of their products. The reason for this is that their old control board is obsolete and the components that are on it, is no longer manufactured or in need to be renewed.

The aim with this study was to investigate the effects a change of manufacturing process would have on the mechanical properties of drill bits made of a WC/Co composite used for stone cutting. The method used today is sintering, where the material is heated in a conventional sintering oven. The other method was microwave sintering, where the material is heated by radiation in the microwave region. Also an investigation of the manufacturing cost were made.The main difference between the two heating methods is that the conventional way is a rather slow process and the microwave method is very fast. The material is also heated homogeniously in the method with mirowaves, aposed to the case with the conventional sintering where the material is heated from the outside in.This makes the material harder and more wear resistent.

This degree project studied surface waters on Kåbo Golf Course in Uppsala, Sweden, with the aim of determining the status of the water and how it is affected by the activities of the golf club, and to obtain suggestions of measures to create better conditions for the water environment on and around the golf course. The project forms part of the environmental protection work of Kåbo Golf Club, which is working towards achieving environmental certification from the Swedish Golf Association (SGF). The study is based on literature studies and quantitative and qualitative field studies of water on the golf course, with the focus on environmental factors identified as being important for the golf industry and on strategic environmental goals developed by SGF. The number of open water bodies in the Swedish landscape has substantially declined during the past 200 years, so it is important to save those that remain. This study showed that the surface water at Kåbo Golf Course is an important element in the surroundings since the area contains few wetlands, which can be a habitat for large numbers of species. The stream and ponds on Kåbo Golf Course also have the important function of serving as water hazards in the game and adding difficulty and variety to the course. Since Kåbo Golf Club wants its surface waters to look aesthetically appealing, extensive algal growth and drying up of ponds during parts of the year are regarded as problems.

Between 1999 and 2009, I followed three of my grandparents, all of whom suffered from dementia. Numerous times, when I visited them in their nursing homes, I was met by residents of the ward who were very unhappy. Through conversations at home with my family, I understood more and more that this was a commonly occurring problem at nursing homes. All too often it was solved with heavy medication, which made the residents tired and they slept more often.During my undergraduate education at Konstfack, I have reflected on whether I, as an interior designer and furniture designer, can have an influence on spaces and furniture so that dementia patients can experience greater calm and security. The idea is if that I perceive the environment as calm and secure, I will also be calm and secure.In my degree project, I want to study how interior design and furniture design can contribute to decreased agitation in people with dementia in nursing homes..

In this thesis we have tried to show the problems that the categorisation of ?norrlänningar? generates. We have also tried to describe what the stereotypes of ?norrlänningar? are by examining what people say on web logs. The method we have used to find the stereotypes in our empirical material is the discourse analyse.

AIMThis thesis purpose is to fill a knowledge gap of research into football-related violence and media. The objective is to create an understanding of how football-related violence is portrayed in the Swedish tabloids Aftonbladet and Expressen.METHODTo reach the desideratum we used a qualitative content analysis of 198 articles concerning football-related violence. To analyse the results we used theories regarding ?Framing?, ?the three ?I?s and the ?Stigma-theory?.MAIN RESULTSThe result from the initial analysis showed a heavy reliance on ?frames? by media outlets. This tended to make the news seem more sensational, dramatized and subsequently more readable than it otherwise would have been.

Green public procurement (GPP) can be used as an instrument to reduce carbon dioxide emissions, and consideration of environmental aspects within public procurement is becoming more common in Sweden and internationally. Two product groups that have been pointed out as especially important are transports and electricity, where the opportunities for public purchasers to reduce emissions are relatively large. This paper studies GPP which aims at reducing emissions, primarily of carbon dioxide, through environmental requirements within these two product groups. A theoretical analysis of cost-effectiveness, transaction costs and effects on technological development is performed, followed by a closer study of how these aspects appear in practice within GPP. The results indicate that a cost-effective allocation of reductions between the two product groups is most likely to be attained if the main part of emission reduction is achieved through environmental requirements on electricity. The cost for emission reduction within transports is relatively high, especially for heavy transports. For transportation services, more generally focused requirements on emission reductions could probably give greater environmental gains, but the existence of transaction costs steer the environmental requirements towards more technology specific types.

Due to their complexity and heavy wear from rail traffic, switches are a sensitive part of the railway infrastructure and moreover expensive to maintain. Furthermore, increasing railway traffic not only accelerates the wear rate but also obstructs the necessary maintenance measures. This paper examines the opportunities for a transition to a long-term maintenance strategy in the Swedish railway network. It contains a study of the maintenance strategy of Banverket, and also analyses statistics of errors in the railway infrastructure. The survey was completed utilising interviews with infrastructure managers, maintenance contractors, planners of railway operations and the Banverket material service department.

This project operate an environmental assessment of total waste was conducted by using a life cycle assessment (LCA), that examines the environmental benefits of recycling production waste from Atlas Copco at Stena recycling. Atlas Copco is a company engaged in the development and production of rig-mounted hydraulic breakers and handheld air breakers and handheld motorized rotisserie. Stena recycling is a recycling company engaged in recycling, processing and refining of metals, paper, electronics waste and hazardous waste.The purpose of this study is to focus on Stena customer Atlas Copco and evaluate environmental benefits between to recycle and not to do it. The result shows that the total energy gain, resulting from the recycling of waste fractions, lands at 6 990 089 MJ, corresponding to drive 3 times around the Equator with a truck (40 t). The result shows that recycling 3040 kg paper provides an energy gain of (38 600 MJ) compared with burning paper (19 500 MJ) is 19 100 MJ, which corresponds to heat a house for 11 weeks.

Earlier this year the Swedish migration board gave a part of their responsibility for the separated children to those municipalities that have signed an agreement with them, so that the children can get the best handling of their matters and also to lift the heavy pressure of the Swedish migration board. Our aim in this paper is to see how this division is made and which areas of responsibility they have. We want to see how this process is being handled in relation to these children?s rights, the Convention on the Rights of the Child and the Swedish law. To get the best information possible we used a qualitative method.

The goal has been to design a product for unloading and storing small gadgetsin the hallway. The aim has been to facilitate the search for importantsmall objects that people never seem to find when they need them the most.The aim has also been to provide a sense of relief when people enter theirhome, and they can empty their pockets on one spot in a very simple yet orderlymanner. The product would be able to sort out, and make the gadgetsaccessible, take as little space as possible, be easy to use and not be perceivedas heavy and clumsy. The work has been done with close involvement of afocus group consisting of 20 people of different ages and with different occupations.The behavior of the focus group has been observed and test modelshave played a crucial role in advancing the work troughout the project. Theresult is a series of storage products for the wall, of simple shapes which canbe combined together in different ways depending on hallway and the user?sindividual taste or preference..

The main purpose of this study is to find out what kind of help social service in one selected municipality in Sweden can provide for children who have witnessed or been victims of domestic violence. Using focus group interview this study investigate how the social workers meet the needs of these children. The bases for our analysis are the Organization Theory and the Attachment Theory, as well as previous research. Important results are that the social services are dependent on notifications in order to do their work and that the most common interventions are foster care, emergency foster care and/or family therapy. The difficulties that social workers perceive their work are unjustified families and heavy workloads.

Lättelement located in Örnskoldsvik AB is one of Sweden's leading companies in the development of building elements in the form of roofs, walls and floors made ??out of light beams. The company has clients from Lund to Kiruna, and from Norway. This means that the elements have high standards when they have to take many different loads from wind and snow due to such wide geographic variation.The roof elements are structured so that the main body is made of light beams with an I?profile.

The aim of my thesis is to obtain knowledge of textile wastewater and textile sludge from an environmental perspective, which can be used as a basis for the  ?Sweden Textile Water Initiative? guidelines for a sustainable sludge management. In my study I have mainly focused on textile dyes, salts and metals and their routes during wastewater treatment.This paper is partly a literature review, which I began by identifying the pollutants discharged from each textile process. Then I studied wastewater and sludge quality, environmental aspects, possible treatment and recycling methods. I have also tried to find existing type of guidelines in order to make comparisons.