Sök:

Sökresultat:

477 Uppsatser om Heavy metal - Sida 23 av 32

En studie av en industrirobots beteende vid borrning

In the assembly process of airframe structures there are many drilled holes and on some parts the holes are mainly drilled manually with pneumatic handheld drilling machines. During conventional drilling in metal, burrs appear. To remove these burrs the parts of the structure must be separated and deburred before they can be put together for fastening. This is a time consuming measure and therefore expensive. To facilitate this process and lower production costs some parts of the process needs to be automated.A part of this thesis was a project in co-operation with Saab, Novator, Specma Automation and the University of Linköping.

Bergkyla och bergvärmeutredning för industrilokalen Rödbergsmyran 5 i Umeå, Västerbotten.

Grubbe Ventilation AB is a sheet metal and ventilation company who provides design, installation, service, and repair of ventilation. The company is expanding their business by building a new facility in Umeå, Västerbotten. The property is designed to be used for both office and industrial work.Grubbe Ventelation AB has not yet decided upon wish system which is to be established to provide the building with heating and cooling. The consulting firm Umeå Projekt Team has therefore been asked to investigate the possibilities to invest in geothermal- heating and cooling.If the investigation of a geothermal heating- and cooling system would provide favorable results it would be a very appropriate alternative that provides energy at low costs and are an environmentally friendly option as the energy comes from stored solar energy in the ground is provided by stored solar energy in the ground.The facility ´s heating and cooling consumptions are calculated in the program BV2 and the result indicate a heating demand of 185 000 kWh per year due to thermal transmittance, transmission losses, heating of warm water and a cooling requirement of 5500 kWh.Three different systems of geothermal heating and cooling were tested in the computer program Energy Earth Design. The results show no difference in the dimensioning of the drill hole if merely heating were to be used or both heating and cooling were to be established.

Cooking banana farming system in rural Uganda : a comparison between agroforestry systems and non agroforestry systems

The demand for food, feed, fibre and fuel has increased in Uganda over the past 50 years due to population growth. Recurring extreme climate events such as drought and flooding, in combination with large-scale land degradation, have led to declining crop yields. Lack of equipment, money and socio-economic issues has contributed to low yields. However, the soils in Uganda have the potential to produce much higher yields than they do today. This study, which was carried out in April-June 2013 in Kkingo District, south-east Uganda, examined the effects of agroforestry on yield of cooking bananas in small-holder farming systems. Six farms practising agroforestry and six farms with no agroforestry, which were chosen in cooperation with the NGO Vi Agroforestry, were compared.

Höghus : En alternativ lösning på vår snabba stadsexpansion

Uppsala like many other Swedish cities is affected by heavy housing shortage, in terms of too few existing flats and residents within the city limits. Every semester thousands of new students are facing the same problems of finding themselves adequate accommodation. The waiting lists for flats and student-dorms are getting longer for each year, and the situation is just getting worse. Simultaneously, Uppsala?s ambition is to increase its population and expand as a Swedish metropolitan, according to the Swedish governmental environment goals. This paper investigates and analyses the possibilities of expanding a city?s population by building high-rise buildings.

Effektivare traktordemonstrationer : femtio lantbruksföretag svarar

The background to this paper is the fact that many products are demonstrated to show the consumer value of the product. This is generally the fact when it comes to agricultural products, such as tractors. The growing number of models makes this even more import for the retailer to perform a demonstration that really catches the interest of a prospect customer. One problem is that these demonstrations are expensive and many small retailers have difficulties to afford demonstrations of every model. Together with Åhmans Traktorcentrum AB a market investigation was conducted. The company has its primary sales area in the region of Östergötland and north part of Småland. Åhmans Traktorcentrum AB is a John Deere dealer.

Outnyttjade resurser inom park- och naturvård

As a small and land scarce country, effective waste management is ofoutmost importance in Singapore. In this study the production of biogasthrough anaerobic digestion from the organic fraction of municipal solidwaste (OFMSW) was compared to incineration of the waste. At the momentalmost all of the OFMSW in Singapore is incinerated. Three differentscenarios were compared to the reference scenario (incineration): one with alarge scale biogas plant that can treat half of all OFMSW in Singapore, onewith a medium scale biogas plant about 15 times smaller than the large oneand one with a small scale biogas plant that can treat waste from e.g. ashopping center or a food center.By using life cycle assessment (LCA) the different scenarios were comparedin terms of global warming potential (GWP), acidification, eutrophication,energy use and land use.

Jakten på de optimala lösningarna : En vetenskaplig essä om förskollärarens ansvar och yrkesetik

Swedish childcare has undergone radical changes in the last 15 to 20 years. It has evolved from kindergarten to pre-school, in other words, gone from simple childcare to an active learning environment with the child as the center. Official documents, such as the pre-school curriculum and other guide documents, define the role and work ethics of the pre-school teacher. In my thesis I argue that it is essential to have an ongoing and continuous discussion at pre-schools on the practical applications of these frameworks and ambitious goals.What do you do when you simply cannot give every child the individual time they should have according to rules and regulations? How do you stay an active and present pedagogue in today?s pre-school with large classes and heavy workloads? How do you establish a common professional work ethics within a pre-school so that all children are treated equally? In my scientific essay, I examine these issues based on a real-life situation: Ellen in the hallway.A pedagogue must continuously make balanced decisions based on rules and regulations, on life- and work experience which, in many cases, contradict each other.

Ny teknik för kombisådd :

The use of combi-drilling during spring tillage has become very common in southern Sweden in recent years. Combi-drilling leads to fewer passes on the field and better plant nutrient utilisation. An example of a combi-drill is the Väderstad Rapid, which is very widely used in spring tillage in southern Sweden. The Rapid has separate fertiliser and seed coulters, which means that the draught requirement is relatively high. It thus requires large, heavy tractors, which compact the soil and are comparatively expensive to buy and run. A few years ago the Finnish combi-drill Tume Nova Combi came onto the Swedish market.

Vindkraft eller kärnkraft - En jämförelse

The scope of this project is to make a comparison of costs associated with wind and nuclear power in order to decide which one of these is the most suitable in the case of an increased demand for electricity. It is also investigated if there are other factors that can influence the choice of energy source.An average cost is calculated in terms of kronor per kilowatt-hour (SEK/kWh) using cost of investment, operation & maintenance and taxes & subsidies. Total investment cost is recalculated to production cost using the annuity method at three different interest rates (6%, 9% and 12%).The comparison is made between three cases of wind power and two cases of nuclear power. For wind power there are two ocean-based (300MW and 100MW installed capacity, respectively) and one land-based (60MW) wind farm. For nuclear power there is one EPR-reactor (1600MW) and one AP1000-reactor (1100MW).

Eftermarknadens möjligheter : En studie av Swecon AB:s tjänsteutbud

ProblemThe manufacturing industry is a mature industry where the profit margins are small and the competition is hard. This makes it hard for both manufacturers and resellers to gain market shares and reach reasonable profit margins only by selling products. Therefore Swecon who is reseller for Volvo Construction Equipment tries to find alternative methods and ways to increase their profit. An alternative source of income could be to develop the range of services that are connected to the ground products.PurposeThe purpose of the thesis is to examine how Swecon in southern Sweden can improve their offers of existing services connected to the ground product and investigate the demand of new such services.MethodThis study is based on a qualitative study of five of Swecons local offices and five of Swecons customers. The empirical framework is mostly based on personal interviews but in some cases information was retrieved by using phone interviews.

Hur påverkar olika ståndortsfaktorer överlevnaden hos planterade regnskogsträd i en sekundär regnskog på Borneo?

De tropiska regnskogarna är några av de mest komplexa och artrikaste ekosystemen i Världen. Stora delar av de naturliga Dipterocarpa regnskogarna har under de senaste decennierna försvunnit helt p.g.a. ändrad markanvändning (oftast jordbruk), eller degraderats till sekundära regnskogar p.g.a. torka, bränder och selektiva avverkningar. Det finns därför behov av rehabilitering för att få tillbaka artrikedomen i skogarna. Syftet med det här kandidatarbetet är att titta på hur överlevnaden hos plantor i ett rehabiliteringsprojekt i en sekundär regnskog påverkas av olika ståndortsfaktorer.

Konstruktion av truckmonterad hjulhanterare

GBD-Storage Systems is a company that provides the industries with products for efficient storage.The company produces pallet racks and accessories like cassettes and extending units. The companyhas also supplied tire racks for a number of tire companies. The company's CEO Gunnar Berglund hasfor some time had an idea to improve the working situation of the workers on tire firms by allowingthe wheels to be handled by a counterbalance truck. The current situation poses numerous heavy liftswhen the tires are handled and therefore is hurting the workers.This thesis has been aiming at helping the GBD-Storage Systems by developing a concept of howan accessory to counterbalanced trucks can be designed to cope with the wheels. This concept willthen be produced as prototype by the company.

When I die, I want to be recycled - a study of the view of the funeral industry on the handling of metals in cremation

Kremering är idag det vanligaste jordfästningssättet i Sverige, de allra flesta som avlider kremeras och gravsätts i urna. Frågan om hur de metaller som finns i kroppen men inte får plats i urnan hanteras har hittills inte väckt så stor uppmärksamhet, speciellt inte ur miljösynpunkt. Dock handlar det om åtskilliga ton metall som varje år grävs ner på kyrkogårdar runt om i landet. Denna metall påverkar dels miljön negativt, dels kommer det att ta upp mer och mer plats på kyrkogårdarna i framtiden, och att gräva ner metaller imarken är inte ett miljöoptimerat sätt att hantera dessa. Det finns dock andra saker än bara miljön att ta hänsyn till i denna fråga.

Lyfta Lätt Tekniskt hjälpmedel för pakethantering

People working with handling parcels in terminals are often victims of musculoskeletal injuries. This is largely due to the hazardous lifting of too many parcels which are too heavy and unsuitable work postures. The human body?s ability to lift and grasp objects is so outstanding that developing a device with the same capability is very difficult.The goal of the project has been to develop a technical device that will improve the handling of parcels with regard to ergonomics. The area of concern was the lifting of parcels between the conveyor belt and the cargo space of the freight car.

The secret life of Bacillus anthracis

Bacillus anthracis is the causative agent of anthrax, a serious and globally distributed zoonosis affecting a wide range of wild and domestic animals, invariably also humans. However, although known to humans since biblical times, much remains to be elucidated concerning the ecology and transmission of this bacterium. Of particular interest is the Bacillus anthracis spore, the uptake of which is the predominant way to contract anthrax and which is legendary for its resilience in the environment and thus crucial for persistence and spread of the disease. Hence, the aim of this study is to review the natural transmission of Bacillus anthracis and investigate potential means by which soil persisting Bacillus anthracis spores reach concentrations sufficient to infect susceptible hosts. When reviewing the literature, three different theories can be distinguished. Firstly, ?the incubator area? hypothesis suggests that favourable soil factors, possibly in association with amoebas, may constitute an environment supporting repeated spore-bacterium-spore cycling, thus increasing the local amount of spores.

<- Föregående sida 23 Nästa sida ->