In this paper the possibilities to replace metal with plastic in products for the building industry were looked into. The first part was a market examination where several suitable products were found. After evaluation the door latch for in-house doors was selected to be re-designed to better suit the properties of plastic.New types of mechanisms were designed with different functions that use the benefits of plastic materials. Models of these mechanisms were developed to evaluate their function. The components in the different mechanisms were adapted for manufacturing with injection moulding.To confirm that the plastic material could handle the appearing stresses calculations on the most vulnerable parts were carried out.

This thesis is a survey and also an investigation of the different factors that affects the cracking that occurs in the inserts at AB Sandvik Coromants production in Gimo. The work that has been done has focused on two main factors, namely, powder characteristics and pressing parameters.AB Sandvik Coromant produces tools and tooling systems for metal cutting. They have some problems in their production of inserts. The problem is that cracks sometimes occur in the body of the insert, after it´s pressed. In order to investigate this, a preliminary study was made in which production principles were studied.

Earlier this year the Swedish migration board gave a part of their responsibility for the separated children to those municipalities that have signed an agreement with them, so that the children can get the best handling of their matters and also to lift the heavy pressure of the Swedish migration board. Our aim in this paper is to see how this division is made and which areas of responsibility they have. We want to see how this process is being handled in relation to these children?s rights, the Convention on the Rights of the Child and the Swedish law. To get the best information possible we used a qualitative method.

The goal has been to design a product for unloading and storing small gadgetsin the hallway. The aim has been to facilitate the search for importantsmall objects that people never seem to find when they need them the most.The aim has also been to provide a sense of relief when people enter theirhome, and they can empty their pockets on one spot in a very simple yet orderlymanner. The product would be able to sort out, and make the gadgetsaccessible, take as little space as possible, be easy to use and not be perceivedas heavy and clumsy. The work has been done with close involvement of afocus group consisting of 20 people of different ages and with different occupations.The behavior of the focus group has been observed and test modelshave played a crucial role in advancing the work troughout the project. Theresult is a series of storage products for the wall, of simple shapes which canbe combined together in different ways depending on hallway and the user?sindividual taste or preference..

The main purpose of this study is to find out what kind of help social service in one selected municipality in Sweden can provide for children who have witnessed or been victims of domestic violence. Using focus group interview this study investigate how the social workers meet the needs of these children. The bases for our analysis are the Organization Theory and the Attachment Theory, as well as previous research. Important results are that the social services are dependent on notifications in order to do their work and that the most common interventions are foster care, emergency foster care and/or family therapy. The difficulties that social workers perceive their work are unjustified families and heavy workloads.

AbstractThe aim of this examination paper is to get an overview on the ?no-maintenance? windowsthat exist on the Swedish market, like plastic and aluminium windows.By way of introduction the reader gets knowledge in the background and problemformulatethat this subject has. This introduction explains why it has become so popular to changeyour windows into plastic- and aluminium windows and there is an existing scepticismagainst PVC and aluminium as construction material for windows.The main part of this report is constructed by segments of interviews where bothproducers of windows and stakeholders gets to answer questions about their viewing onno-maintenance windows from a material and construction point of view and where theproduction is headed to in the future. This is followed by an evaluation of a questionnaireon how pleased the house owners that changed their old windows to no-maintenancewindows are, followed by an inspection of windows made up from wood and an aluminiumclothing, windows made from only aluminium and PVC-based windows. It ends with atheory part about the materials PVC and metal based upon facts included in literature.By reading this report you can draw the conclusion that no window can be entirely nonmaintenancebut that the materials PVC and aluminium still are good substitutes for woodto lessen the maintenance..

Every year about 210 000 tones dry weight of sewage sludge is produced in Sweden. Most of the sludge is applied to agricultural land, plantsoil and landfill cover. Sewage sludge contains essential nutrients such as nitrogen and phosphorus. Nitrogen is limiting growth on solid ground in Sweden and can therefore be used as fertilizer to increase productivity. In order that the sludge can be spread to forest land it requires first a conversion of sludge to pellets, to make it more manageable.

Humidity problems and poor ventilation are factors that we associate with poor indoor airquality which are known to negatively affect health. Such problems have decreased with timein Sweden but, in other countries this is still a major problem especially during winter. InChile, this is most common in the central regions of the country, especially the Strait ofMagellan. This issue is primarily due to surface condensation happening indoors which bringsabout dampness which facilitates the growth of fungus and stains, foul odors, metal corrosionand more. This is due to a combination of poor ventilation and insufficient forms of heatingalong with buildings which have no insulation.

The basis of the study lies with a newly patented gearbox by cardiologist and inventor Stig Lundbäck. Stig founded CorPower Ocean AB to further develop the gearbox to be used in a wave energy device. The purpose of this project is to develop a concept of a lifting system with CorPower Oceans gearbox that is more energy efficient than a hydraulic lifting system. The goal is to use technology from CorPower Oceans gearbox inversely to perform heavy lifting as an alternative to hydraulics. The project is limited to applying the gearbox and gear rack on a forklift with a lifting capacity of ten tons.The main tool in this project will be the product development process Systems Engineering where only the most relevant parts will be used to develop a concept.

This thesis has been carried out at Diac Metal AB at Torsvik outside of Jönköping. The company produces parts for, amongst others, office furniture and store equipment. The essay will be concentrated on one detail which is included in many of their products.Today the company uses an ordering quantity based on experience which is rarely updated. Furthermore the operations are performed in both the company?s own engineering workshop but also an external workshop.The purpose with the report has been to check whether an updating of today?s batch shaping and ordering system can mean simpler storage control and possibly cost reduction.

The Earth and everything else in the universe was created in the Big Bang around 14 billion years ago. A point with tremendous density and mass began to expand and more and more atoms began to form. From the first and lightest like hydrogen and helium to heavier atoms such as iron and eventually gold. The formation of the Earth occurred about 4.6 billion years ago and so the first gold atoms were concentrated only here. It is however believed that much later in Earth's history an extra supply of gold occurred thanks to massive meteorite bombardments.

På uppdrag av Skärteknikcentrum Svergie AB i Gislaved gjordes en undersökning av driftstörningarna i produktionsprocessen hos tre olika medlemsföretag som kunde kopplas direkt till kvalitet på stångmaterialet som används. Undersökningen gjordes hos Gnosjö automatsvarvning AB, Finnveden Powertrain (Alvestafabriken) och Bufab Lann AB, alla arbetar med stångmaterial och har liknande tillverkningsprocesser. Uppgiften gick ut på att identifiera ifall det finns driftstörningar som enbart är beroende av kvaliteten på materialet samt vilka problem de leder till. Efter genomförda undersökningar och en större inblick hos de olika företagen konstaterades det att variationer i kvaliten på materialet har en effekt på hur produktionsprocessen fungerar. Störningar i produktionen kan reduceras ifall materialet egenskaper förbättras eller tillverkningsprocessen ändras.

Since feeding fodder crops to dairy cows is a heavy and time-consuming but often disregarded line of work, this study wishes to view the different possibilities that are currently available to decrease the time to feed and apply this knowledge on an existing farm. For this purpose, four farms have been studied due to what feeding systems that are currently used and how long time the feeding required. The occurring systems are either mobile, i.e. a feed mixer operated by a tractor witch feeds the cattle via a drivable fodder table, or a stationery mixer, i.e. an electrically powered mixer which fills an automatic feeder.

The aim of the study was, through qualitative interviews with school counsellors in Swedish primary schools, to study what the counsellors are experiencing condition their ability to work proactively according to the Swedish Education Act provisions on student health. During the study, six interviews with school counsellors who worked in the same suburbs, was conducted. The theoretical approach that was used is Michael Lipsky's theory of street-level bureaucrats and the term discretion. The overall outcome of the study was that the interviewed school counsellors felt that they did not have good opportunities to work preventively as the Education Act requires. The main reason for this was the school counsellor?s heavy workload.

Aim: The aim of this study is to understand why people have changed their preferred community over time. What are the main factors when changing to a new one?Method/material: The method has consisted of personal interviews with six different people in the ages between 20-22 and of different gender. The main material that has been used in this essay is the theory of Uses and Gratifications as explained by Denis McQuail, the theory of Convergence culture by Henry Jenkins and the theory about Communites of Practice by Etienne Wenger.Main results: This study shows a heavy affection that the use of communities often centers round the people around the community, rather than the functions that the communities themselves provides. Having people that you know on the community you choose is a vital part for people or at least having the support of other people and changing to another community at the same time.