This thesis raises the problem with acid mine drainage around the closed mine Finngruvan.The purpose of the investigation was to compare metal content in surface water in the areaand its catchments between year 2010 and 2003, also to make calculation of specific runoffand metal load, furthermore determine the recipients in the area. Surface water samplingwhere preformed at the same place as 2003 and also at a few other places of interest. Adigital elevation file were used in GIS to calculate the area of the watersheds in the region,observations in the field where also made. The collected data were used to make comparisons,calculations and conclusions. The result showed that the surface water 2010 had somewhatlower metal concentrations.

To regularly remove woody vegetation along the roadside of forest roads is an important part of the road maintenance, since the vegetation binds moisture in the road side and, thus, the removal makes the road drying faster with results in improved bearing capacity. Vegetation removal also makes it easier to upgrade the road by material recycling from the ditch and, moreover, the visibility along the road is maintained.The aim of the study was to evaluate what type of chain flail is the best and most cost-effective for removal of different kind of woody vegetation along forest roadsides.Time studies were made on two chain flails when removing woody vegetation in three different classes; easy-, middle- and heavy shrub removal. The studied flails were one light and rather simple flail named Optimal M160 and a heavier and more advanced flail named Slagkraft H210. The removal was made according to Holmen Skogs? specification and the quality of the cleaning was measured by objective belt inventory.The productivity was higher with the heavy flail within all cleaning classes.

Soils in a metal contaminated site on Stångberget in Gusum in southeastSweden were investigated and compared to relatively unaffected soils a fewkilometres away. Pollution came from historical release of untreated flue gasesfrom a brass mill. The objective was to find information on how high the metalconcentrations are, if metals from the polluted soil affect the surroundings andif the metal contamination affects the microbial community. The soil wasinvestigated using several different methods, such as field XRF measurements,chemical analysis of metal, carbon and nitrogen content, pH, acid neutralizingcapacity, texture, soil depth, field leach tests, sequential extraction and microbialfunctional profiles. The study showed that copper and zinc concentrationswere above Swedish Environmental Protection Agency guidelines for lesssensitive land use on the entire investigated area.

This project includes development of new packaging for dry spices and an investigation of how to automate the production line. The preliminary investigations show needs of an environmental friendly packaging possible to re-close. After screening for suitable materials three concepts were developed, a stand-up pouch, a plastic jar and a metal can. The pouch was excluded in a concept choosing process. In this process it was also decided to further develop the metal can concept.

Mine waste from Ljusnarsbergsfältet in Kopparberg, Sweden, is considered to constitute a great risk for human health and the surrounding environment. Some of the waste rock consists of sulphide minerals. When sulphide minerals come into contact with dissolved oxygen and precipitation, oxidation may occur resulting in acid mine drainage (AMD) and the release of Heavy Metals. The purpose of this study has been to characterise the waste material and try to chemically stabilize the waste rock with a mixture of sewage sludge and calcium carbonate. The drawback of using organic matter is the risk that dissolved organic matter can act as a complexing agent for Heavy Metals and in this way increase their mobility.

In order to avoid harmful substances ending up at the municipal sewage treatment plants, it is important to purify the wastewater at the source. One such source is the wheel washers available in many tire garages which are used to wash the wheels on our vehicles when we change between summer and winter tires. It is important to wash the wheels before storage, to extend the tires lifetime. The purpose of this study is to find a green innovative solution for reduction of emissions of Heavy Metals at the source, so that the sludge from the sewage treatment plants can be used as fertilizer. The target is to find a wheel wash method which leads to compliance with the guidelines for car washers, and that also provides a better washing result than with the existing method.

Syftet med mitt arbete är att arrangera om två operaarior till metal och spela in både originalversioner och metalversioner för att sedan kunna jämföra dem med varandra. Frågeställningarna jag utgick ifrån var: " Hur ska jag kunna skriva om två operaarior till trovärdiga metallåtar, utan att bruka allt för mycket våld på originalen?", "vilka skillnader gör jag i min sångteknik och interpretation, om jag ens gör några, i de klassiska versionerna jämfört med metalversionerna?", "vad är det för skillnader och likheter mellan de klassiska förlagorna och metalversionerna?" och "vilka val gör jag i arrangeringen och varför?".Ariorna som jag har valt att arrangera om är Dido's Lament ur operan Dido and Aeneas av Henry Purcell och Svegliatevi nel core ur operan Giulio Cesare in Egitto av Georg Friedrich Händel. Den konstnärliga delen av mitt arbete har bestått av fyra delar; en inspelning av de klassiska versionerna av ariorna, själva omarrangeringsprocessen från klassiskt till metal, inspelningen av metalversionerna och jämförelsen mellan de klassiska versionerna och metalversionerna. Projektet visade att det sällan blir som man har tänkt sig och jag reflekterar även kring hur det kom sig att de förväntade skillnaderna i min sångteknik från klassiskt till metal aldrig riktigt uppstod, men att interpretationen var annorlunda i de olika versionerna.

Uvån Hagfors Teknologi AB (UHT) has developed a process ? GRANSHOT® ? for quicksolidification of metals in water baths. In the process liquid metal is splintered ? granulated ?into small drops. The drops are rapidly cooled in a water bath where all the heat energy from theliquid metal is transferred into the water.

Toxic metals contaminate soil worldwide and thus serve as sever environmental threat. Therefore the purposes of this study were to investigate in which soil fractions that different Heavy Metals (Fe, As, Cu, Zn and Pb) could be found in contaminated soils and if it is possible to use sieving as a method for decontamination. Soil samples were collected from three different locations, the Nasa silver mine, the Blaiken-mine and Svalget environmental station. The samples were oven dried and later on sieved into six different fractions 8mm, 4 mm, 0.5 mm, 0.250mm, 0.063 mm and <0.063 mm. The fractions 4 mm, 0.5 mm and <0.063 mm from each location were analyzed in an x-ray fluorescence detector.

Chemical stabilization of mine waste from Ljusnarsbergsfältet with sewage sludge and calcium carbonate residuesMine waste from Ljusnarsbergsfältet in Kopparberg, Sweden, is considered to constitute a great risk for human health and the surrounding environment. Some of the waste rock consists of sulphide minerals. When sulphide minerals come into contact with dissolvedoxygen and precipitation, oxidation may occur resulting in acid mine drainage (AMD) and the release of Heavy Metals. The purpose of this study has been to characterise the waste material and try to chemically stabilize the waste rock with a mixture of sewage sludge and calcium carbonate. The drawback of using organic matter is the risk that dissolved organic matter can act as complexing agents for Heavy Metals and in this way increase their mobility.

The following study aims to investigate the environmental conditions of the harbor of Sk?rhamn, a small fishing community on the west coast of Sweden. The interest to do so rose as a newly built apartment residence failed to connect the sewage pipes of 18 apartments, causing the untreated sewage running into the sea. The parameters accounted for are the C/N ratio, total organic carbon (TOC) as well as total nitrogen present (TN) and ?13C in the top ten centimeters of a sediment core retrieved in the Sk?rhamn harbour.

Denna studie har som mål att undersöka hur produktplaceringar i spelet Metal Gear Solid 4 kan ha för roll i narrativet, vad dessa tillför spelet och vilken roll de har för karaktärerna i berättelsen. Studien undersöker även om dessa produktplaceringar visas på ett sätt som förstärker produktens eller varumärkets status men även för att se om stereotyper nyttjas för att upphöja deras effekt.Denna studie bygger på en kvalitativ textanalys med semiotiska och narrativa inslag där jag tillsammans med valda teorier om bland annat narratologi och produktplacering kommer att svara på uppsatsens frågeställning:Hur används och integrerar varumärken/produkterna med narrativet och karaktärerna i Metal Gear Solid 4?  Resultatet visar att de produkter och varumärken som finns med i spelet har varit viktiga för både narrativet och karaktärerna. Dessa produktplaceringar har bland annat gjort spelets berättelse och dess karaktärer mer verkliga då de har hjälpt att skapa en länk mellan fiktion och verklighet. Produkterna har spelat en stor roll i narrativets story och händelseförlopp då de har varit viktiga instrument som har underlättat spelandet och fört narrativet framåt samtidigt som de har använts av spelets karaktärer och gjort det möjligt för dem att kunna uppnå det slutgiltiga målet i narrativet, vilket är som många andra berättelser idag, världsfred..

The filters used today to purify water are often expensive and the need to find new filter materials is substantial. Studies of pine bark have shown that this is a material that may be used as an alternative to conventional filter materials, such as activated carbon. However, the study of pine bark has shown that a leakage of phenolic compounds may occur when using the material for water purification. Therefore, the purpose of this report is to investigate the release of phenols from pine bark, in order to evaluate the use of pine bark as a filter material. Another assignment is to investigate the amount of metals adsorbed by the filter material.

The purpose of this thesis has been to assess whether leaching from one particular Swedishlandfill site, Skörbytippen, is contributing to elevated levels of Heavy Metals in a ditch runningfrom the landfill site to the lake Mälaren in the communal region of Håbo kommun. Since theditch is stretching approximately five km downstream from the landfill site, in situ observationsand maps with known points of inflow was utilized to determine appropriate test points for thecollection of samples.Soil, water and sediment samples were collected and analyzed for content of organic material, pHand conductivity. Data on plant-available elements and total amounts of Heavy Metals wasacquired through ICP-analysis.The results show that the Skörby landfill is currently in the methane-forming anaerobedevelopment phase, which indicates that the concentration of free and complex-bound metals inthe leachate water should be low due to chemical binding with other landfill compounds. The pHof the sediment samples was generally one unit higher than the soil samples and some of themeasured data, such as pH and conductivity, show that an environmentally disturbing dischargeof some kind of strongly alkaline chemical(s) has been made from Benders? takpanneindustri inclose proximity to the landfill.

Heavy duty vehicles often have problems with traction during the winter periods. For vehicles that can lift tag axles it is possible to increase the normal force on the driven axle by lifting one or more tag axles, this will then increase the propulsive force of friction. This however increases wear on both road and vehicle. A possibility to reduce the wear while achieving nearly equivalent traction compared to lifted tag axles is to allow the vehicle to regulate the normal force by lowering the pressure in the air suspension associated with the tag axles or by the lifting of these axles. The vehicle would then by itself be able to set just the right amount of normal force on the drive wheels to avoid unnecessarily high normal forces while maintaining sufficient traction.The purpose of the report is to find out which parameters affect heavy duty vehicles when driving on slippery slopes and how traction can be improved.