The objective of the essay was to identify the nursing care required by a dog suffering from heat stroke and how to educate and advice the owners how to start treating their dog and prevent the condition from occurring in the first place. The essay is based on a literature study. Several databases were searched for scientific research to try find answers to the issues. Keywords concerning the subject were used and mixed in different combinations to sort out the suitable studies. The results of the study indicate that the dog should be cooled by the owner directly after detection. The most crucial issue is to reduce the body temperature as quickly as possible or the morbidity will worsen.

This report describes the work of developing a specification of requirements for Waste Heat Recovery Units. The main part of the paper describes how the work with the specification of requirements has been performed. One specific question to be answered is:What are the customer?s demands in case of properties for the Waste Heat Recovery Units and how is that information collected as an order documentation to suit the business area Oil & Gas?The report begins with a description of the assignment and continues with the aim and background. A theoretical part describes the different areas and methods that have been important during the process.

This study aims at examining the prospects for a policy transfer of a Swedish municipal environmental policy (that of Växjö) to the French urban commune Blois, for which an ambition of becoming a leading eco-city in France, was declared by the mayor in 2008.In the analysis, emphasis is laid on mechanisms to institutionalize the main environmental policy principles, such as political and institutional structures and processes. Other prospects for an institutionalization of a new environmental policy that are to be investigated are economic structures as well as visions of the different decision-makers concerned. Research methods used in the study are qualitative interviews, document studies and a questionnaire.The findings of the analysis show that today?s prospects for an environmental policy in Blois close to that of Växjö, are clearly limited. The limitations can partly be found in economic structures but these seem to be rather related to a lack of priority amongst actors.

This master thesis project at KTH is performed in the Mechanical and Aerospace Engineeringdepartment at University of Florida (UF). The thesis is a small part of a gas turbine researchproject where a vapour absorption refrigeration system (VARS) and a high pressure regenerativeturbine engine (HPRTE) are integrated together. The main objective is to build a computermodel of the VARS. The computer model is supposed to be used to analyse the off-designperformance of the VARS and should also be easy to integrate as a subroutine in a more complexsystem model. To model the VARS some knowledge of the absorbent/refrigerant mixture had tobe well known, in this case a mixture of ammonia and water.

The financial result of a transfer of ownership or external sale is to a great extent depend-ent on how the transfer is implemented and how the tax rules apply. The applicability of the Swedish tax rules regarding transfer of ownership in closely held companies largely de-pends on the interpretation of the prerequisite, equal or similar activity, which can be found in section 57, clause 4 of the Swedish Income Tax Act.The ruling made by the Supreme Administrative Court in RÅ 2010 ref. 11 changed the concept of equal or similar activity. The ruling lead to that the shares in a closely held com-pany was qualified due to that the capital from the original company had been transferred to the operating company. According to the ruling the original company had been split into several companies, thus was the companies considered to carry out equal or similar activity.

An energy study has been performed on two blocks in an area called Gävle Strand. The buildings are owned by a tenant-owner?s association called brf Carolina and were built by the company Skanska 2008. The builder as well as brf Carolina are pussled by the fact that electricity use is higher than expected while heating is less. Skanska is also very interested in finding out how much heat recovery from stale exhaust air through a geo-thermal heat pump is contributing to the general heating requirement and energy balance in four out of the ten buildings located on the properties.To find possible answers to the higher electricity use a literature survey on user behaviour was conducted.

The financial result of a transfer of ownership or external sale is to a great extent depend-ent on how the transfer is implemented and how the tax rules apply. The applicability of the Swedish tax rules regarding transfer of ownership in closely held companies largely de-pends on the interpretation of the prerequisite, equal or similar activity, which can be found in section 57, clause 4 of the Swedish Income Tax Act.The ruling made by the Supreme Administrative Court in RÅ 2010 ref. 11 changed the concept of equal or similar activity. The ruling lead to that the shares in a closely held com-pany was qualified due to that the capital from the original company had been transferred to the operating company. According to the ruling the original company had been split into several companies, thus was the companies considered to carry out equal or similar activity.

The objective of this study is to examine the sustainability of recovering industrial wasteheat from several heat sources in a foundry constructed in a plant belonging to ITT Waterand Wastewater in Emmaboda, Sweden. A triple bottom line perspective will be appliedto achieve this objective. The triple bottom line approach takes into account ecologicaland social performance in addition to financial performance. The technology forrecovering the waste heat is a Borehole Thermal Energy Storage (BTES) which is aconstruction consisting of 140 vertical boreholes, 150 meters deep with an internal spaceof four meters.The calculated amount of energy for storage is approximately 3800 MWh annually. Ofthis amount 2500 MWh are expected to be utilized, while storage losses accounts for theremaining part.

In this work we have compiled results from various studies concerning medical conditions that may possibly be avoided by castration and the effects that may occur after castration of the healthy bitch. The work is a literature review but it also includes a summary on the age recommendations for castration of the healthy bitch, castration before or after the first heat and the castration method most commonly used of ovariohysterectomy and ovariectomy. The summary is based on a questionnaire answered by personnel from 20 veterinary clinics and animal hospitals evenly distributed throughout Sweden.The summary showed that ovariohysterectomy was the most common method of castration and the recommendation in age ranged from 6-12 months. Regarding castration before or after the first heat 75% of the veterinary clinics and animal hospitals answered that they recommended castration after the first heat. Literature study shows that there are both advantages and disadvantages of castration of the healthy bitch and that it therefore is important that each bitch get a personal and individual evaluation before a decision is taken concerning a castration..

Atlas Copco Tools develops and manufactures handheld industrial tools. Heat and surface treatments are used to provide the tools with certain properties. There are no routines for the choice of treatment or for how to specify treatment on drawings. Production documents that are sent for production abroad may not be clear enough. Some treatments are known as trademarks and there are no instructions for how to specify these on drawings and in CAD-models.The purpose of this master thesis work is to create recommendations for the procedure of choosing heat and surface treatment.

The aim of this study was to develop a load prognosis model for Uppsala district heating system to be used as a tool for heat production optimization. The methodwas to build three models for the different customer types; housing, industry andoffices and then scale them for the total system using data from Uppsala districtheating system. The heat load consists of two parts, one that is temperaturedependent and one that is dependent of the social behavior of the customers. Thetemperature part was modelled with an ARX model using an outdoor temperatureprognosis as input signal. The social behavior part was modelled using the mean ofthe social behavior from some days before and additionally by distinguishing betweenweekdays and weekends.

This case study has been conducted within the Swedish fitness chain World Class to explore the opportunities for knowledge development and transfers within franchise networks. We have interviewed the product manager at the World Class headquarter, the owner of a franchise club and a local product manager from the same facility. Our finding indicates that various forms of knowledge transfer occur within the World Class network, particularly in product development and sales. The transfer occurs within the framework set by World Class with regularly scheduled meetings. In addition informal networks provide other means of knowledge exchange between some units.

This thesis examines different methods for the cooling of data centers. Several means of cooling with the refrigeration cycle have been studied, as well as the feasibility of using free cooling in different parts of Sweden. In addition, the possibilities of transferring excess heat to a nearby district heating system were investigated. It was found that in all investigated cases except two, the data center could be cooled solely with free cooling for at least 300 days a year when only the outside air temperature was considered as a constraining factor. The limit was then set to 20 °C.The vast majority of all district heating systems in Sweden get little to none of their heat from other excess heat sources.

The sun is a huge energy source with great potential of providing energy to the heating of homes and other buildings in an environmentally sustainable manner. In order to provide buildings with energy from the sun it is necessary to transfer the energy supply over time to when the demand arises. By storing the heat in a seasonal storage, solar energy from the summer can be used in the winter when the demand for heating is greatest.Today's existing plants are mainly in Europe and particularly in Germany. These facilities are designed to supply heat demands greater than 400 MWh and covers about 40-50 % of this need which consists of energy for space heating and domestic hot water. How much of the heat demand that is covered, the solar fraction, is partly due to losses from the storage which in turn is connected to the surface area of the storage.

The Motor Group of the European Council was commissioned in the autumn of 1997 to prepare a proposal for a new European Bus and Coach Directive. In the beginning, most of the Member States did not have the accessibility requirements as their main concern; still a smaller network with actors from the National delegations from Britain, Germany and Sweden would influence the other National delegations in the Council group to finally agree to retain the requirement of accessibility of the Directive. Within the EU decision process, the European Disability movement acted as a strong player during the whole negotiation process using the proposal to a new Bus and Coach Directive as a tool to influence key actors to go towards a Directive with a strong approach for accessibility.Policy Transfer and Policy Transfer Network are used as analytical tools to understand and structure the transfer of the question of accessibility during the negotiation process. Actors understanding how the bureaucratic process works within the EU decision system have a chance to contributing for the changes in the directions they wishes for within a range of policy areas. The principal aim of the Directive was to guarantee the safety of passengers and to provide technical prescription in particular to wheelchair users.