Sök:

Sökresultat:

983 Uppsatser om Heat transfer - Sida 37 av 66

Geoenergilösning för DN-huset

In this thesis proposals for different designs of a borehole thermal energy storage (BTES) have been developed for the building DN-huset in Stockholm, Sweden. To build a BTES results in savings in energy costs by approximately 44 %, i.e. 2 million Swedish crowns annually. Furthermore, a BTES would reduce the annual environmental impact with roughly 75-157 tonnes of CO2 equivalents per year, depending on how the electricity consumption?s environmental impact is estimated.

Påverkan av skogsbrand på litiska arkeologiska fynd ? experimentell simulering av brand

This is a paper about the effects from smoldering fire on lithic objects from an archaeological view. The introduction gives the background to this paper, a short orientation to forest wildfires and why the work is limited to: flint, quartz, quartzite and slate. Material and methods describes the stone materials and the setup that was used in the temperature logged tests with three replications for each type of material. The fuel in the burnings was peat on a bottom of sand. Flint showed a more drastic effect from heat compared with the other materials. Slate seems to have greater tendencies to change to darker colour and luster at lower temperatures than the other materials.

Musicerandets roll i barns utveckling

Vilka erfarenheter har lärare av att barns musicerande leder till effekter på andra områden i livet än det musikaliska? Vad säger forskning om sådana samband? Vi har tittat på bl. a. transferbegreppet, som innebär att övande inom ett område får verkningar på helt andra områden. Om det existerar transfereffekter skulle det kunna vara en anledning till att se över synen på musikämnet.

Styr- och beräkningsprogram för kalibrering av värmestrålningsmätare

Då det köptes in ny utrustning för kalibrering av värmestrålningsmätare till SP, Brandteknik, fanns det ett önskemål om att effektivisera proceduren vid kalibreringen. Vid kalibrering med den befintliga hård- och mjukvaran finns många manuella moment som skulle kunna reduceras.I detta projekt har ett styrprogram utvecklats i programmeringsspråket LabVIEW. Programmet använder ett seriellt kommunikationsprotokoll för att styra den kontroller som reglerar temperaturen i kalibreringsugnen. Programmet ställer in de temperaturnivåer som ska ingå i kalibreringen, upp till tio stycken, och kontrollerar när temperaturen har stabiliserat sig. När den gjort det tas ett antal mätpunkter ut och sparas till en resultatfil.

EAS-tagg med fuktsensor : Design och utvärdering av EAS-alarmteknologi för fuktdetektering

Electronic article surveillance (EAS) is widely used in shops and libraries together with an RF-tag attached to the goods or books in order to prevent shoplifting. By implementing the addition of a moisture sensor to the RF-tag, other functions become possible, including the ability to use as an alarm with regards to frozen goods, which have been shipped but which have melted and have, subsequently, refrozen. In- relation to care for the elderly, one time-consuming step involves checking whether there is the necessity for a change of diaper and this can, instead, be based on an RF-tag with an EAS-system alarm. A preliminary investigation was made using the moisture sensors, which involved how the resistance changes when liquid and/or heat is applied. A simulation of the LCCR circuit (RF-tag with the sensor) was conducted in order to determine how the resonance frequency changes for different resistances levels.

Energiåtervinning från gjuteriprocess till fastighet, undersökning för ökat utnyttjande av spillvärme

This diploma work on D-level is made in cooperation with Varnäsföretagen AB in Eskilstuna. The company performs contract manufactured aluminium goods. This work is a continuation on earlier diploma work in Varnäsföretagen AB. Even if the industry process consumes much energy for melting the aluminium goods, they consume a great amount of oil to warm up the building. The purpose of this work is to examine some places in the building and the process to see how much energy it is possible to recycles to the heating system and reduce the costs for heating.

Internprissättning i offentlig verksamhet ? En utvärderingsstudie av internprissystemet på Blekingesjukhuset i Karlskrona

Syfte Studiens syfte är att utvärdera internprissystemet på Blekingesjukhuset i Karlskrona. Metod Uppsatsen är en fallstudie av internprissystemet på Blekingesjukhuset i Karlskrona. För att tillföra en viss bredd till utvärderingen utgörs vårt empiriska material av intervjuer med såväl verksamhetschefer, planeringsstrateg, controllers samt sjukhusets ekonomidirektör. Med avsikt att underlätta presentationen av studiens resultat och utvärderingen, som sådan, har vi utformat en utvärderingsmall baserad på den information som samlats in under våra intervjuer. Slutsatser Studien pekar på att sjukhuset använder internprissystemet i syfte att skapa kostnadsmedvetenhet bland de anställda, för att på så sätt förhindra överkonsumtion av tjänster som utförs internt.

XML som informationsbärare för EDI

Information handling has been a key issue for different companies for a long time. Electronic Data Interchange (EDI) is used to transfer different business documents from one company to another. This is done in such way that the information itself is separated from how this information is stored and handled in the companies internal systems. As different companies have different systems there is a need for a standardised format for this exchange. There is a big difference between EDI-systems based on what kind of EDI-standard is used. The most common standard in Europe is EDIFACT, but with increased interest of using the Internet for business communication there is a need for a standard that is adjusted for use over the Internet.

Uppnå användaracceptans genom interaktionsdesign : med CRM-system som applikationsomåde

The purpose of the study was to investigate the use and losses of energy in an existing older building. Another purpose was also to look through various options for heating systems with renewable energy in the building. The aim was to reduce the use and losses of energy. The first step was to study the related electricity bills of the building and also perform measurements and calculations of the building envelope and ventilation. The next step was to find out the possible actions for energy saving by performing measurements and calculations.

With a few liters of clean drinking water : a Cost Benefit Analysis of the socio-economic effects from implementing new clean drinking water technologies in rural India

In 2010, Airwatergreen AB started testing their new technology, the Airwaterwell, an atmospherical water generator of their own design that is running on solar heat, with a production capacity of three litres of water per day and m2. The purpose was to focus on foreign aid organizations as main purchasers for project investments towards rural communities in developing countries that suffer from lack of, or compromised quality of drinking water. In order to further understand if this technology would bring a positive impact in the developing countries, the company contacted the Swedish University of Agriculture for a socio-economic study of the Airwaterwells? potential. The authors elected Cost benefit analysis as the appropriate method for conducting the study and India became the study region because of its many problems with water related issues such as diseases as well as insufficient water supply for households. The regions that this study is based on are Gujarat, Haryana and Uttar Pradesh given their differences in income, health situation and poverty rate.

Elproduktion med ORC-teknik ombord på fartygsserien MK II.

Given that the oil prices have risen and the environmental regulations has become more stringent, the interest in operating efficiency has increased. The project has investigated the possibility of producing electricity from waste heat generated in the diesel process. One technique to utilize and convert energy into electricity is the ORC (Organic Rankine Cycle). This process is based on the Rankine process (the steam process), the difference from the traditional Rankine process is that instead of water as a working medium, an organic substance is used. The main component used in the process is a evaporator, a turbine, a condenser and a pump.

Titel: Internprissättning ? skattekonsekvenser av internprissättning i multinationella koncerner

Titel: Internprissättning ? skattekonsekvenser av internprissättning i multinationella koncernerProblem: Beskattningsåret 2007 infördes en regel med krav på att företag i intressegemenskap måste dokumentera grunden för sin internprissättning. Organisation for Economic Co-Operation and Develoment har givit ut en samling rekommendationer kring detta. Denna samling behandlar dels förkommande dokumentationskrav men även modeller för hur internprissättning skall upprättas. Ovanstående har utmynnat i följande frågor.

Solenergi i Norrra Djurgårdsstaden

This report will examine various solar energy technologies in order to decide if they could be applied in the Royal Seaport. The Royal Seaport is a Swedish urban district under development in Stockholm, with the goal of becoming a sustainable district. Two main techniques, solar collectors and solar cells, including sub-categories, are addressed in this report. Another sub-category, a hybrid system, will also be mentioned. The main difference between solar collectors and solar cells is the type of energy produced by the system.

Tillämpning av ett medium : kvalitativ pilotstudie av två generationers användning av iPad

This study aims to investigate and describe the direction of the ideological development of the Swedish gymnastics association Gymniska Förbundet. Between 1928 and 1932, this organization transformed from a purely gymnastic and cultural association into an influential platform for the production of Swedish nationalist ideology. Based on theories of National Socialism?s formation within modern society, the analysis focus on the conditions regulating Gymniska Förbundets relation to modernity. Thus the study examines the association?s ideas in relationship to the concept of modernity.

Vitrification in sealed containers : Evaluation of a new technique (Rapid-i?) for cleavage stage embryos and blastocysts

Ovarian stimulation in assisted reproduction often leads to the production of a high number of oocytes. After fertilization of these oocytes, the resulting embryos can be cryopreserved for later use. Vitrification is a recently introduced method for cryostoring embryos, showing high survival rates for both cleavage stage embryos and blastocysts. Characteristic of vitrification are high concentrations of cryoprotectants and ultra fast freezing which makes the material glassily. A major concern with vitrification has been the direct contact of the cryo-solutions with liquid nitrogen.

<- Föregående sida 37 Nästa sida ->