The report comprises two separate parts:part 1:  Temperature needs for district heating in the paint shop for axles in building 210part 2:  Energy and low temperature waste heat solutions in heating and cooling systems for   building 64 with surroundingsThe paint shop for axles in part 1 has air quality requirements in places for coating of axles. Toachieve desired air properties there are different process ventilation systems, which consist ofventilation coils for heating and cooling, plus air humidifier. The ventilations coils for heating usedistrict heating. Today the ventilation coils use water of 100°C to achieve necessary air demands inthe coating boxes. This part of the report investigates whether the existing system would achievethe air requirements with a water temperature of 75°C instead of 100°C in the ventilation coilsduring the coldest parts of the year.

Transfers of joint stock companies can be executed in several ways - for example by transferring individual shares or by transferring all shares or by selling the company's assets and liabilities. It is not fully clear which rules should apply to transfers of joint stock companies. Some legal experts claim that the Sales Act (Köplagen) is applicable, while others claim that the rules for promissory notes (Skuldebrevslagen) should apply. This distinction is of great significance regarding the extent of the vendor's liability. According to Skuldebrevslagen the vendor's liability is rather limited, while Köplagen enjoins the vendor a more extensive liability.A transfer of a joint stock company brings about great economical risks, both for the vendor and for the purchaser.

The thesis aims to examine how companies optimize the human capital from a value creation perspective. The value creation will be related to transfer of knowledge, recruitment, staff turnover and development. The thesis has a deductive approach and six qualitative interviews have been conducted. The results from the interviews will be strengthened with a quantitative data analysis of two measurements; value added per employee and human capital efficiency. The theoretical framework includes definitions of human capital.

This thesis is about a part of the marquetrytechnique, scorching. Scorching is made by heating up something, put a veneer into the heated substance and make a controlled burning. This technique is old but still used today and have according to me great potential for development. In my work I wanted to give the scorching greater room then I earlier have seen. I wanted the scorching to be the dominant ingredient for a decorative element in a piece of furniture or an interior.

Background: Competence development has become more important since the pressure on effectiveness is increasing and organisations are expected to constantly improvement. The design of the competence development activities is governed by the strategy which in turn will affect the outcome of the same. A knowledge intense business in which changes recently have taken place is healthcare, a business in which competition also has increased as a result from globalization. Due to this, it is highly important to take care of and improve the competence of individuals. According to this, we have found that healthcare is an interesting business to study with regard to competence development.

Hjälpverb tillhör de vanligaste orden i språket och syftet med denna undersökning är att beskriva andraspråksinlärarens användning av modala och futurumbildande hjälpverb. Användningen undersöks på två olika språkliga nivåer, senare delen av nybörjarnivå och avancerad nivå. Materialet för undersökningen är resonerande text, som använts vid examination. Hjälpverben excerperades och en kvantitativ jämförande studie gjordes mellan de två nivåerna. Därefter gjordes en djupgående analys av användningen av några hjälpverb.

Denna rapport presenterar ett alternativt sätt att ljussätta terräng i datorgrafik. Tidigare modeller har vanligtvis byggt på lokal ljussättning, som inte tar hänsyn till kringliggande geometri, och har med en extra process approximerat effekten av ljusinteraktionen. Genom att använda sig av en teknik som kallas precomputed radiance transfer (PRT) kan man förberäkna hur en punkt interagerar med ljus för olika inkommande riktningar och undviker därmed att göra detta under programkörningen. Det är viktigt att denna teknik även fungerar tillsammans med level-of-detail (LOD) terrängrenderingsalgoritmer eftersom rendering av alla trianglar i terrängen för varje skärmuppdatering inte är optimalt för dagens grafikkort. Man vill därför representera den underliggande terrängen med fler trianglar närmare betraktaren och färre längre bort.

Geothermal energy can be extracted from an aquifer, where the groundwater is used as heatexchange medium while heat and cold are stored in the surrounding material in the aquiferand to some extent in the groundwater. Application of aquifer storage for the use ofgeothermal energy is mainly used in large scale facilities and is limited to sites with suitableaquifers in the form of ridges, sandstone and limestone aquifers.Löwenströmska hospital in the municipality of Upplands Väsby, north of Stockholm, islocated nearby the northern part of the Stockholm esker. This means that it can be profitableand environmentally beneficial for the hospital to examine the possibilities of aquifer storagein the esker material next to its property.The purpose of this master thesis has been to investigate if geothermal energy storage with aseasonal storage of heat and cold can be applied within Löwenströmska hospital?s propertyarea using groundwater modeling. A hydraulic groundwater model was constructed inMODFLOW based on a simplified conceptual model of the groundwater system.

This master thesis was carried out for Saab Avitronics, a business unit of Saab ABactive in electronic systems for military aircrafts. Reliability and weight are of crucialimportance in this environment. To improve reliability and lower the weight graphitemay be used for electronics cooling. Graphite is an anisotropic material and hasthereof high thermal conductivity in two directions (in-plane) and a relatively lowconductivity in the third direction (through thickness).The purpose of this thesis was to investigate if graphite is an adequate thermalconductor to use in PCB carriers. The carriers support and cool the PCB by divertingthe heat dissipation from the PCB components to the edge.

Tylö AB is the leading manufactor of sauna cabins in Europe, but there is a lack of a sauna lightning produced by Tylö. The project of developing a new sauna lightning series was assigned two students at the developmentengineering program at Halmstad University. The main problem with lightning in the sauna is the heat and security aspect. The selection fell on LED technology as the lightning source, thanks to its small measures and low heat emission. The work of constructing of a lightning armature which the capability of cooling down the LED lightning was carried out during autumn ?06 and spring ?07.

Tylö AB is the leading manufactor of sauna cabins in Europe, but there is a lackof a sauna lightning produced by Tylö. The project of developing a new saunalightning series was assigned two students at the developmentengineeringprogram at Halmstad University. The main problem with lightning in the saunais the heat and security aspect. The selection fell on LED technology as thelightning source, thanks to its small measures and low heat emission.The work of constructing of a lightning armature which the capability of coolingdown the LED lightning was carried out during autumn ?06 and spring ?07.

AbstractClimate and environmental issues are of paramount importance. Researchers agreethat we must all contribute to a reduction of gases that contribute to climatechange. Energy consumption must decrease within all sectors and the promotionof renewable sources of energy must be introduced.Each sector should aspire to decrease its energy consumption. Energyconsumption is strongly linked to waste gases that contribute to climate change.Passive houses are a part of the construction industry's methods to attain energyconservation.Passive houses are derived from low energy houses and super insulated houses. Apassive house is intended to obtain heat from the inhabitants and through theiractivities.

The purpose with this essay was to examine how the European Union is working totransfer norms to states they signed an agreement with and provide support for inframe of the Barcelona process and the Tacis programme. The theory which weused was Ian Manners (PhD in Political Science) theory of "the EU as a uniquenormative power". The aim was to examine whether the EU - which Manners mean- has had a normative power to influence states to change. We used a qualitativeapproach through the use of a multiple case study and qualitative text and contentanalysis. The States which formed the basis of our study were within the BarcelonaProcess; Morocco and Tunisia as well as Azerbaijan and Armenia funded by theTacis programme.

sustainable development by reducing the energy use by EU:s directive of energy efficiency and the UN Convention. The second purpose is to present the technical solutions regarding ventilation and heating system that is being used in passive houses. This was done using 8 passive houses, 4 germany and 4 swedish passive houses. Even the international and Swedish system requirements for passive houses have been addressed in this project. The goal was also to explain how and why the mechanical system in passive houses has developed to the technology used today.

Every year, KTH participates in the Shell Eco Marathon, a competition whose goal is to design a vehicle that can go as far as possible using only the equivalent energy of one liter of petrol fuel. This year, one of KTH?s contributions to this race is the Agilis prototype; a car powered by a uniquely configured HCCI-engine developed at the university. The engine is dependent of several subsystems in order to work properly, among other, systems for cooling and lubrication.Combustion engines are in need of a cooling system that reduces the heat developed during the combustion. In general, two main types of cooling systems are employed; either air cooling, where the outside of the cylinder is exposed to a flow of the surrounding air, ore water cooling, where water flows in tubes around the engine, and the heat are transferred by the water to the surrounding air through a heat exchanger.The purpose of the lubrication system is to prevent the friction that builds up in the interference between moving parts in the engine.