The aim of this study has been to investigate students? understanding of fractions when they occur in the practical subject home economics. In order to investigate this, the learning study method was used. Learning study can be understood as a method to gain deeper understanding of what is learnt by students during a lesson to increase learning outcome.The variation theory framework has been utilized to analyze the results of this study. The object of learning was chosen to be addition of fractions bigger than one half when they appear in home economics.

Two elementary schools are now being built in Gråbo (in the municipality of Lerum),Röselidsskolan and Ljungviksskolan, which are both designed with solar thermalcollectors for the schools domestic water heating. During the summer while thelargest amount of solar heat can be generated, the activity hence the domestic wateruse in the schools are heavily reduced. Both schools are connected to the local districtheating system which makes it possible to use the solar collectors to deliver heat tothe district heating.The purpose of this thesis is to evaluate the two systems mentioned above and todetermine which system is more suitable to apply on a school. The building whichconditions were used for this evaluation is Röselidsskolan.A solar heating plant of each system type was dimensioned from the expected andknown conditions of the building. The purpose with the dimensioning was to makethe solar plants replace the ordinary energy source as much as possible.

This thesis aims to examine how the quality of data that is entered into and retrieved from a corporate group's ERP and Data Warehouse systems can be improved. The corporate group has already taken several measures that will improve the quality of data. For instance the corporate group has updated and merged the previous ERP systems into one. At the same time the corporate group adjusted the settings in the updated ERP system, so that it will be harder to register incorrect data in the ERP system. With regards to the processes and routines, the studied department has efficient written routines and processes.

When grains of wheat and rye are conventionally milled, large quantities of bran classified as by-products are left and are mainly used for animal feed. Bran is a complex material composed of the aleurone layer, nucellar epidermis, a seed coat, a fruit coat and a small proportion of the germ and endosperm depending on extraction rate. The bran fraction consists of approximately 40-50 % dietary fibre which can contribute to increase the nutritional quality of human cereal food. It would also be valuable for the food industry to convert by-products as bran to products with higher commercial values. The aim of this thesis was to analyse the content and composition of dietary fibre of heat treated wheat and rye bran according to the Uppsala method with some modifications in order to analyse soluble and insoluble dietary fibre separately. Half of the bran samples were precooked, dried and roasted and the other half dried and roasted (uncooked).

AbstractIn urban societies people spend more and more time indoors, which put great demands on the indoor environment. If the ventilation is to manage the removal of unwanted substances in the indoor air, a good mixing of the air is required. The question arises that, whether the buoyancy forces will counteract a good mixing of the indoor air or not?This report aims to clear up the difficulties whether you need to consider the buoyancy forces or not, when adjusting a ventilation unit. For studying the indoor mixing of the air a two dimensional model is constructed in COMSOL Multiphysics.

This pre-study investigates the possibility of U-value measurements through an acoustic method. A hypothesis about an acoustic model built on acoustic theories combined with U-value theories is presented to answer the questions: ? Can U-value theory be combined with acoustic theories? ? Can the coefficient of heat be affirmed trough an acoustic measurement? The idea for this dissertation begun with a logical idea in mathematical similarity, between the coefficient of heat transmission units and sound intensity units. The U-value theory is based on assumptions such as initial resistance for inner walls and initial resistance for outer walls. The resistance in the material is interpreted through sound intensity theory. The argument is built upon mass law theory, which means if the frequency or thickness of the material layer doubles it implies an increase of sound reduction by 6 dB.

The thesis aims to examine how companies optimize the human capital from a value creation perspective. The value creation will be related to transfer of knowledge, recruitment, staff turnover and development. The thesis has a deductive approach and six qualitative interviews have been conducted. The results from the interviews will be strengthened with a quantitative data analysis of two measurements; value added per employee and human capital efficiency. The theoretical framework includes definitions of human capital.

The heating of companies premises is today functional with electrical heating and heating offossil fuel. The energy cost for these kinds of heating in buildings has heavily increased duringthe last years and the influence on the environment has become more visual. This leads to thatenterprises today become more anxious to render energy more effective and find alternativesolutions to their ancient heating systems. This is something that Skandinaviska kraftprodukterAB in Halmstad has become aware of.The purpose with this examination is to find the most cost-efficient and environmental measuresfor the office and workshop premises of SKP AB. Where one of the bigger things is to find agood alternative for their current oil furnace, which was heating the workshop.

This thesis has identified and studied measures to allow for reduced use of electricity in a waste incineration plant in western Sweden. The energy extracted from the waste at the powerplant is utilized and sold in form of electricity and heat. Technical and environmentally the combined heat and power plant is by today's standards among the leading waste incineration plants in the world. The owners are constantly striving to improve the efficiency of the waste incineration plant. They have seen the opportunities for savings in reducing internal usage of electricity.

I mitt examensarbete har jag undersökt om det lämpar sig att använda en manuell metod för att skapa normal maps till icke-organiska polygonmodeller avsedda för datorspel. Jag har använt mig av Photoshop för att måla normal maps som jag sedan applicerar på lågdetaljerade modeller jag skapat, för att höja detaljgraden avsevärt. Då icke-organisk modellering inbegriper modeller som ska representera hårda ytor, och därmed inte animeras med deformation, så antog jag att denna metod skulle lämpa sig väldigt väl åt dessa ytor som ofta har extremt mjuka former och precisa vassare kanter. Min metod har varit att studera litteratur om Normal Mapping och hur man använder Photoshop för detta. Jag har sedan utfört praktiskt arbete för att utvärdera hur effektiv metoden är samt vilka fördelar den bidrar med. Jag går igenom teori för normal mapping som jag stödjer med hjälp av faktatexter och instruktions-DVDer i ämnet för att sedan redovisa metoden jag använt i mitt arbete. Jag avslutar sedan med en diskussion kring mitt resultat och redovisar vad jag kommit fram till genom mina experiment. Jag kommer fram till att Normal Mapping med Photoshop är mycket väl lämpat åt hårda ytor och även bidrar med optimeringar i arbetsflödet både vad gäller organisering, tidsåtgång samt kontroll över resultatet.

The purpose of this thesis is to study how organisations are working with repatriation of employees who have been working abroad, especially regarding how their experiences and competences are being utilised and transferred within the company. A qualitative abductive method is used, since the aim is to obtain an understanding of this phenomenon. The main source of information has been 21 interviews. The interviews were executed in two steps; a preliminary study with nine Swedish organisations was followed by our main study, containing 12 interviews with repatriates, their colleagues, and personnel employed at the International Assignment departments at Scania and Volvo. The conclusion of this thesis is that large Swedish companies, which have Swedish employees working abroad do not seem to be working with repatriation according to suggestions given by the theories, even though their performances are better than earlier research implies.

Heat is distributed to the district heating customers through pipes with water as a heat carrier. The district heating system is complex. To decide what is leakages from the district heating net versus what is the water consumption of the plant, is difficult. Therefore, the purpose of this master thesis is to establish a model where the district heating net?s leakages but also the water consumption of the plant can be followed daily. The project is performed at Vattenfall´s district heating power plant in Uppsala. Information is gathered through discussions, drawings of the plant and guided tours of the plant.

The aim of this study was to gain insight into how two enterprises work with competence development and thereby study how the relationship between competence development and workers, employees, look like. The focus was on the workers motives and motivation towards a participation in a competence development course, their attitude to education, and how the transfer of skills gained from the course, into the workplace looks like. Further on, the work situations influence on the workers competence development has been taken into account.In the study, six people were interviewed in the role of either manager, coach or course participant who are employed in two different enterprises in the south of Sweden.The results showed that the participants were motivated by a strive for personal development or that the participants viewed education implementation as a part of the professionalcareer, which has resulted in a positive attitude towards the competence development course. The managers? motive for decisions about education was to change the prevailing attitude among the staff for the better and thereby strengthen the company?s brand. The work situation has encouraged the desire to participate in developmental education as the feeling of control has encouraged the workers to further development.

This report contains results of our study at CTC in Ljungby. CTC produces heating products such as boilers, heat pumps and additional products to their heating systems.The purpose of the report is to make a proposal how CTC will supply their new production line for heat pumps with materials. The proposal includes a production layout and a scheme for how to place the material in the production storage.The new production line will produce two different products and both of them have several variants. The line will also have a mixed flow, so the products can be produced in a random order. These conditions demand that the production line has great flexibility and that the material to all the variants can be stored in the production storage.With these conditions as input we made a layout proposal to the company.

Purpose: Our purpose is to describe and understand how a project-based, knowledge-intensive firm in the high-technology industry creates and transfers knowledge, seen from two perspectives.Methodology: Our qualitative case study has an explorative approach since earlier studies within our positioning are absent, thus we look at KM abductively. To gain more depth to our study, we mirror our findings from our case company with data collected from three additional organisations.Theoretical perspectives: We see a clear distinction between researchers, either seeing knowledge as an object or a process. Thus, we review theories from both sides, either focusing on the creation or transferring of knowledge. In addition, theories on KM in project organisations areaccounted for.Empirical foundation: The study is based on the empirical foundation which consists of the data received through six interviews with employees at our main case company and, additionally, two interviews at each of our three mirrorcompanies.Conclusion: The study found KM being seen from both perspectives in all four firms. Through this, we found implications for how our case company could proceed in the future..