This study was conducted to test the hypotheses that a forest managed by selective cutting can store more carbon than a forest managed by clearcutting. The study was carried out as a meta-analysis. The data that was found was analyzed by performing t-tests on the proportional effect that the two silvicultural methods had on the driving factors of CO2-efflux and carbon stores in coniferous boreal forest. In all areas tested, an effect in favor of selective cutting was found, but not all of them significant however. The soil respiration following selective cutting was significantly lower than that of clearcutting, and the primary production of a clearcut area cannot according to reason exceed that of an area post-selective cutting.

The Swedish field of digital X-ray imaging has since several years relied heavily on distributed information systems and digital storage containers. To ensure accurate and safe radiological reporting, Swedish software-firm eCare AB delivers a system called Feedback?the first and only quality assurance IT support product of its kind. This thesis covers several aspects of the design and implementation of future versions of this software platform. The focus lies on distributed directory services and models for secure and robust data propagation in TCP/IP networks.

AbstractThis report intends through a case study to investigate if lightweight concrete isappropriate as main material in the outer wall of a seven storey residential building.A technical design is carried out in accordance with the definitions and requirementsfor passive houses, given by FEBY?s1 ?Demand specification for passive houses?.A literature review is also carried out for a comparison between regular bolt wall andlight weight concrete wall, with a focus on the safety of moisture.The lightweight concrete block used in the report is as a celblock produced by thecompany H+H Sweden AB.The methods used have resulted in compliance with requirements andrecommendations from authorities. Calculations of energy, noise and moisture riskassessment has been carried out.The work has resulted in the conclusion that the lightweight concrete itself is notable to isolate in the extent necessary to obtain chosen U-value of 0,1 W/m2 ° C,without getting to thick. Therefore additional insulation is needed. There are fewrelevant reference objects built with only light weight concrete.

The control of indoor temperature must be able to handle large time constants and both measureable disturbances like outdoor temperature, and non-measurable disturbances, like waste heat from appliances. Due to cheaper microcontrollers (small computers with designated tasks) with better performance, more advanced and computation-demanding methods for control can be used.In this thesis, Generalized Predictive Control (GPC) has been implemented and tested on a theoretically derived model of a house. GPC states that a model of the system is estimated in every sample, and the control is carried out simultaneously, based on predictions of the model. Disturbances like solar radiation can be estimated and used in the control as well. The control signals are determined by quadratic programming, which makes it possible to consider conditions, for example limitations on the control signals.GPC requires a number of parameters to be defined, like model order and control signal penalty, but is relatively robust for variations in them.

Glass has sophisticated front properties and are used as facades in high buildings. During cold periods, these glass facades could cause thermal discomfort, due to cold downdraught. Cold downdraught can be countered by placing heaters under glass surfaces. Nowadays technology offers highly insulating windows, which is why there is an interest to investigate the indoor climate with only underfloor heating. The research in this area is limited, and few empirical methods are available.

This report is a study in voltagelevel in connection with regeneration of brake energy from the tramtype M31 in Gothenburg.In the act of braking, the tram M31 uses electrical braking where the electrical motors generates energy and if possible send it back to the overheadline, where other trams in the nearby can use this regenerated energy for its own driving force. In cases where no other energyconsumers are located in the same section, there is a resistance witch task is to convert this energy into heat. The regulation of this resistance appears to cause an increase in the voltagelevel into far too high levels.Investigations of the trams regulationequipment and its construction have been done. Further have measurements on the overheadline been performed in order to map the voltagevariations during a longer period of time.The result have been showing that the voltagelevel during regeneration often is as high as 880V-920V, more extreme values have not been observed in a large scale. The values are especially high compared to the nominal voltagelevel.

This report is a study in voltagelevel in connection with regeneration of brake energy from the tramtype M31 in Gothenburg.In the act of braking, the tram M31 uses electrical braking where the electrical motors generates energy and if possible send it back to the overheadline, where other trams in the nearby can use this regenerated energy for its own driving force. In cases where no other energyconsumers are located in the same section, there is a resistance witch task is to convert this energy into heat. The regulation of this resistance appears to cause an increase in the voltagelevel into far too high levels.Investigations of the trams regulationequipment and its construction have been done. Further have measurements on the overheadline been performed in order to map the voltagevariations during a longer period of time.The result have been showing that the voltagelevel during regeneration often is as high as 880V-920V, more extreme values have not been observed in a large scale. The values are especially high compared to the nominal voltagelevel.

This report is a study in voltagelevel in connection with regeneration of brake energy from the tramtype M31 in Gothenburg.In the act of braking, the tram M31 uses electrical braking where the electrical motors generates energy and if possible send it back to the overheadline, where other trams in the nearby can use this regenerated energy for its own driving force. In cases where no other energyconsumers are located in the same section, there is a resistance witch task is to convert this energy into heat. The regulation of this resistance appears to cause an increase in the voltagelevel into far too high levels.Investigations of the trams regulationequipment and its construction have been done. Further have measurements on the overheadline been performed in order to map the voltagevariations during a longer period of time.The result have been showing that the voltagelevel during regeneration often is as high as 880V-920V, more extreme values have not been observed in a large scale. The values are especially high compared to the nominal voltagelevel.

It is of increasing importance to in the most effective possible way, manage and control all the transactions of raw materials, products and information that are exchanged between an organization and all its operators. These flows and the need for strategy and managing the processes of planning, implementing and control of the supply chain, has given name to the concept supply chain management. Supply chain management involves all movement and storage of raw material, and all the processes that is needed to manufacture a product from origin to consumption. Globalization, technology and increasing time and quality-based competition are all driving forces behind the concept and reasons for an increasing interest in supply chain management.The purpose of this essay is to by using a qualitative case study examine which decisive success factors that can be identified for effective supply chain management. We have compiled different theories on the subject to use for analyzing a case study Li & Fung, who is a successful supply chain management company.

Detta examensarbete har utförts på Sapa Heat Transfer i Finspång och har tagit upp frågan med hur den interna hanteringen av produkterna kan orsaka defekter. I arbetet har en typ av defekt undersökts särskilt och denna defekt kan ses som ett exempel. Företaget tillverkar aluminiumband till värmeväxlare, främst till fordonsindustrin. Banden levereras på rullar med en diameter upp till 1700 mm, och en bredd mellan 12 mm och 1440 mm. Syftet med detta examensarbete är undersöka en defekt som är orsakad av den interna hanteringen, det vill säga det som sker mellan produktionsstegen.

Omställningen till ett mer hållbart samhälle spelar en betydande roll för att uppnå deEuropeiska mål och klimatavtalen, 20/20/20-målen. Ett av målen anger att andelen förnybarenergi ska öka vilket ställer högre krav på elnätets kvalitét. Framtidens elnät måste blimodernare, att det genom utvecklad styrning och övervakning kan balansera ökadeeffektvariationer och därmed erhålla en ökad stabilitet, så att god samverkan mellan förnybarelproduktion och elanvändning uppnås. Redan i dagsläget finns tekniska lösningar som gördet möjligt att konstruera ett sådant modernt elnät.Projektgruppens uppdragsgivare var Ystad Energi AB som ville undersöka möjligheten attansluta ett batterilager i samband med landanslutningen i Ystad hamn.När färjorna vid kaj ansluts till det fasta elnätet kan effektbehovet i Ystads lokala elnät öka iden utsträckningen att abonnerad effekt på överliggande elnät överskrids. I dagsläget är detinte möjligt att uppgradera till ett högre effektabonnemang eftersom transformatornsbegränsade maxeffekt som förser Ystad med elenergi redan är uppnådd.För att undersöka möjligheterna till ett batterilager, har dels Ystads effektbehov ochlandanslutningens tillkommande effektbehov analyserats.

This report is a study in voltagelevel in connection with regeneration of brake energy from the tramtype M31 in Gothenburg.In the act of braking, the tram M31 uses electrical braking where the electrical motors generates energy and if possible send it back to the overheadline, where other trams in the nearby can use this regenerated energy for its own driving force. In cases where no other energyconsumers are located in the same section, there is a resistance witch task is to convert this energy into heat. The regulation of this resistance appears to cause an increase in the voltagelevel into far too high levels.Investigations of the trams regulationequipment and its construction have been done. Further have measurements on the overheadline been performed in order to map the voltagevariations during a longer period of time.The result have been showing that the voltagelevel during regeneration often is as high as 880V-920V, more extreme values have not been observed in a large scale. The values are especially high compared to the nominal voltagelevel.

This report is a study in voltagelevel in connection with regeneration of brake energy from the tramtype M31 in Gothenburg.In the act of braking, the tram M31 uses electrical braking where the electrical motors generates energy and if possible send it back to the overheadline, where other trams in the nearby can use this regenerated energy for its own driving force. In cases where no other energyconsumers are located in the same section, there is a resistance witch task is to convert this energy into heat. The regulation of this resistance appears to cause an increase in the voltagelevel into far too high levels.Investigations of the trams regulationequipment and its construction have been done. Further have measurements on the overheadline been performed in order to map the voltagevariations during a longer period of time.The result have been showing that the voltagelevel during regeneration often is as high as 880V-920V, more extreme values have not been observed in a large scale. The values are especially high compared to the nominal voltagelevel.

 Saab Microwave Systems (SMW) is a business unit within Saab AB that manufactures and develops different types of radar- and sensor systems for naval, airborne and ground based forces as well as within the market for civil security. In addition to the manufacturing of radar and sensor systems they also provide different types of service concepts. The business unit has 50 years of experience within the area of developing radar systems and is considered to be one of the market leaders. When applying an assemble-to-order production strategy with products at this level of cost price the product lead-time is vital and becomes an important part of the strategy within marketing and sales. Within SMW there is a new department called Supply Management (SM) that provides the supply of incoming and outgoing material. Within SM there are four sub-departments working with activities such as planning, purchasing, receiving inspection, storage and distribution.

Library architecture today is a complicated history. Public libraries are no longer merely a place for book storage, but also a virtual library a social meeting place and a place for study. All these diverse tasks and roles emerge in the democratic designing process of a new library and also transform into the architecture. The underlying process is the evaluation and negotiation of the libraries overall tasks and ideas, ideals and values. Multiple ideologies are incorporated in library architecture.