This report summarize what have been done during the Master of Science Thesis that Klas Schjelderup has written for the company RANOTOR Utvecklings AB. The company is developing modern steam engines and this work should develop a machine to perform tests on a new type of piston seal that hopefully could be used in the future. The steam engines will be both volumetric and energy compact, around 1600hp/literof cylinder volume, and it will have a lot of practical applications.The new type of piston seal is hydrostatic lubricated which means that a fluid is separating two faces that normally is in contact. In this case pressurized water is used to separate the piston seal from the cylinder wall. RANOTOR have earlier formulated that at least the expander in the modern steam engine have to be oil-free, due to other components functionality in the closed water system.

The use of combi-drilling during spring tillage has become very common in southern Sweden in recent years. Combi-drilling leads to fewer passes on the field and better plant nutrient utilisation. An example of a combi-drill is the Väderstad Rapid, which is very widely used in spring tillage in southern Sweden. The Rapid has separate fertiliser and seed coulters, which means that the draught requirement is relatively high. It thus requires large, heavy tractors, which compact the soil and are comparatively expensive to buy and run. A few years ago the Finnish combi-drill Tume Nova Combi came onto the Swedish market.

ProblemThe manufacturing industry is a mature industry where the profit margins are small and the competition is hard. This makes it hard for both manufacturers and resellers to gain market shares and reach reasonable profit margins only by selling products. Therefore Swecon who is reseller for Volvo Construction Equipment tries to find alternative methods and ways to increase their profit. An alternative source of income could be to develop the range of services that are connected to the ground products.PurposeThe purpose of the thesis is to examine how Swecon in southern Sweden can improve their offers of existing services connected to the ground product and investigate the demand of new such services.MethodThis study is based on a qualitative study of five of Swecons local offices and five of Swecons customers. The empirical framework is mostly based on personal interviews but in some cases information was retrieved by using phone interviews.

Background: Myocardial infarction is the most frequent cause of death in Sweden. Previous research has indicated large gender differences as regards the type of care received by the patient. Aim: The aim of the literature review was to describe women?s experiences after myocardial infarction. Methods: A literature review based on eleven qualitative articles was performed.

Bakgrund: Hjärt- och kärlsjukdomar är ett globalt växande folkhälsoproblem som dessutom är en ekonomisk last på samhället. Forskning har uppskattat att majoriteten av dödsfall kommer att bero på hjärt- och kärlsjukdomar vid år 2030. Några riskfaktorer för att utveckla hjärt- och kärlsjukdom är ett högt BMI, rökning och låg fysisk aktivitet. Forskning har visat att primärpreventivt arbete med livsstilsförändringar är något som minskar riskfaktorerna och är kostnadseffektivt för samhället. Syftet: var att beskriva vilka primärpreventiva metoder sjuksköterskan använder för att uppmuntra till livsstilsförändringar hos patienter med risk för  hjärt- och kärlsjukdom samt att beskriva hur dessa primärpreventiva metoder påverkar riskfaktorerna.

Bakgrund: Hjärtkirurgi är idag ett av de vanligaste större kirurgiska ingreppen i Sverige. Smärta efter hjärtkirurgi kan hindra patienter från att ta djupa andetag eller att röra sig. Om smärtan blir underbehandlad kan det resultera i postoperativa komplikationer. Intensivvårdssjuksköterskor ska ha kunskap om postoperativ smärta, smärtbehandling samt regelbundet dokumentera patienternas smärta. Syfte: Att undersöka postoperativ smärta hos patienter som genomgått hjärtkirurgi med median sternotomi.

The Swedish pulp and paper industry meets higher demand for energy efficiencyi mprovements with increasing energy prices and changes in the Swedish renewable energy certificate system. One action of energy efficiency improvement is by using secondary heat, that otherwise would have been treated as waste heat, for use in a system with lower temperature demands. The aim of this Master´s thesis is to identify possible secondary heat sources in a typical Swedish pulp and paper mill and to investigate what economic benefits the secondary heat will provide when being used for pre heating of wood chips to a kraft digester.The Master´s thesis focuses on three secondary heat sources; dry warm air, warm water and moisture saturated warm air located inside the pulp or paper mill. Two types of kraft digesters are simulated within this study, a typical Scandinavian digester and a modern twin vessel steam phase digester.Due to quality aspects and low temperature level drying is the drying technology with dry warm air rejected. Using warm water in direct contact with wood chips increases the quantity of water to the evaporation plant and thus reduced pulp or paper production and is therefore also rejected.

När ett haveri inträffar uppstår direkt en mängd olika kostnader i form av underhållsinsatser, reparationsmaterial och administrationsinsatser. Utöver dessa kostnader förloras även de intäkter som maskinen genererar samt täckningen för de fasta och rörliga kostnaderna. Alla dessa kostnader skall täckas av de värdeskapande enheterna på företaget och påverkar det finansiella resultatet negativt. För att förbättra ett företags lönsamhet ökas antingen intäkterna eller så reduceras kostnaderna. Trots detta är det för många företag okänt hur stor kostnaden faktiskt är då en maskin står stilla.Arbetets uppdragsgivare är Konecranes Machine Tool Service (MTS), ett företag som erbjuder underhållstjänster och underhållslösningar till företag inom verkstadsindustrin.

The aim of this study was to investigate whether a dietary change, physical activity or a combination of both gave the best result when treating obesity, concerning weight loss and BMI. Excessive weight and obesity are today a big health-issue and it is estimated that 10 % of the men and 12 % of the women in Sweden have a BMI over 30, i.e. are suffering from obesity. The corresponding number for children is 3 %. No one can say for sure what causes obesity but there are many theories.

This thesis has treated a three-axis robot which task is to serve a larger test machine tomove the modules to be tested, from the storage to the test site. The robot is composed ofthree linear actuators; two standard components of ball screw type and a custom-builtactuator of trapezoidal type. The work has mainly focused on the custom-built device to seeif it could be replaced with a standard component. Part of the work has been to look into thepicking tool and to see if there are any possibilities to improve its function.The report presents two different proposals which I decided to call Robot 1 and Robot 2 andthey aim to address the problems arising in the purpose-built linear unit and the X-axislinearity problems. Robot 1 focuses on eliminating the problems that arise around therobot's X-axis, with such simple means as possible and without making excessive materialchanges.

AbstractThe overarching goal of this study is to investigate whether teachers of Swedish at upper secondary schools in Sweden feel that they know how to teach critical literacy, especially on the Internet, and also if they know how it is taught. It also investigates the difficulties teachers experience in teaching critical literacy. A secondary goal is to investigate the knowledge of critical literacy among students at upper secondary schools in Sweden. The study is based on quantitative and qualitative research. The research consists of two parts.

The project was made in cooperation with Coffee Queen AB, Arvika. The task was to develop and design a new cooler for the milk to Jura Impressa X9, an espresso machine. The good assistance with staff at Coffee Queen and engineers in China and at KPA in Karlstad led to a solution to the problem. It was a long road to get there, many different concepts was developed. When the day came to decide which concept to work with, the choice stood between two different technical solutions.

Bakgrund: Varje år diagnostiseras cirka 30 000 svenskar med hjärtsvikt. Antalet drabbade förväntas öka i samband med en åldrande befolkning. Omhändertagandet av dessa patienter medför höga kostnader, främst inom slutenvården. Hjärtsvikt är i sig ingen sjukdom, utan en benämning på ett sjukdomstillstånd orsakat av annan sjukdom eller en störning av hjärtats funktion. Det innebär att hjärtats pumpförmåga har försämrats, vilket medför att hjärtat inte klarar av att pumpa ut tillräckligt med blod och syre till kroppens vävnader och organ.

The low bearing capacity of roads during the spring thaw and periods in the autumn leads every year to increases costs for Holmen Skog. To reduce costs and increase accessibility Holmen Skog decided to install and test a CTI-system. Central tire inflation (CTI) is a system that makes it possible to monitor and vary a vehicle?s tire inflation pressures from the cabin, while the vehicle is in motion. When tire pressures are reduced, the area of the contact surface between the tire and the road increases, thus reducing the ground pressure. The purpose of this study was to evaluate the CTI-equipped vehicle and analyze if the CTI technology is economical defensible during the thaw 2005.

Bakgrund: Varje år föds 1 % av alla barn i Sverige med medfött hjärtfel. Barnet med denna diagnos och dess föräldrar är i stort behov av omvårdnad. Viktiga komponenter i denna omvårdnad är stöd och uppmuntran, information på rätt nivå för mottagaren och att frågor blir besvarade. Föräldrar till barn med medfött hjärtfel lider i större mån än andra föräldrar av någon form av psykosocial stress eller ångest relaterat till barnets diagnos. Syfte: Syftet var att beskriva föräldrars upplevelser av att ha barn med medfödda hjärtfel.