Moisture damage in kitchens is an area that many people believe to be irrelevant andnot a subject to concern, however the problems encountered might be larger thananticipated.The purpose of this essay is to get a view of how problematic moisture damagecurrently is as well as what can be done to prevent damage during the constructionand building of new housing.Statistics regarding moisture damage as well as several tools for damage preventionhave been studied and investigated. Industrial regulations have been reviewed tounderstand the requirements construction companies must legally follow during theconstruction and building of new kitchens. Home manufacturers and largerentrepreneurs have been contacted in order to get their point of view regarding theproblems with moisture damages in kitchens.The knowledge of moisture safe constructions is prevalent by home manufacturers,insurance companies and entrepreneurs. Despite this knowledge, the constructioncompanies predominately follow the industries regulations, which normally onlyimplement the minimum requirements.In order to get construction companies to design and build kitchens with increasedmoisture security, stricter industrial regulations might be needed to be implemented.Unlike bathrooms and laundry rooms, kitchens are not defined as a ?wet room? andthe regulations for the construction of kitchens are more lenient.It is difficult to detect water leaks in an early state and the moisture damage is usuallyextensive before it is discovered and repaired if the kitchen lacks moisture securedconstruction and water security.

The ammonia emissions are an environmental issue since they contribute to eutrophication. By far the largest source of ammonia emissions is manure from agriculture and should therefore be reduced. Loss of ammonia is not only negative for the environment but also to the farmer who loses nitrogen that could have been used by the crop. The focus of this study has been emissions from spreading slurry where the loss can vary widely depending on slurry-, soil-, and weather conditions. There are mainly two different ways to reduce the emissions. One is to inject or mix the slurry into the ground to avoid air contact. The other way is to use acid to reduce the pH in the slurry to a level between 5 and 6 where the equilibrium is so strongly pushed to NH4+ that hardly any NH3 can be lost.

The purpose of this thesis is to examine the nature of framework agreements in public procurement in Sweden. The main question is whether a contracting authority is obligated to place orders under a framework agreement when purchasing a product or service that is covered in that agreement and to what extent a contractor is obligated to accept such orders. If the answer to that first question is that an obligation does exist the next question to arise is what kind of consequences to expect when either party fails to meet that obligation. Of great importance is whether a contracting authority that hasn?t used an existing framework agreement is liable to pay damages to the contractor who according to the agreement had a right to deliver.

In an attempt to prevent ground damage and to reduce harvesting costs, StoraEnso's districts Värmbodal and Fryken, selected a number of final felling areas where the base roads have been marked by planners in the districts. The parties involved in the experiment are mainly planners, harvester operators and forwarder operators. The purpose of this paper is to determine the findings of this trial and to find cost savings or lost revenue. This has been done with a sample of interviews from the involved parties who logged the chosen felling areas. Literature about the interview process has been used to facilitate data collection, interpretation and analysis of the material. If we look at profitability based on assumed income and expenditure, revenue per MWh would be 63 SEK.

Gallring är en beståndsvårdande utglesning där gagnvirke tillvaratas. Syftet med gallring är att styra över produktionen på ett lägre antal stammar och på sikt skapa ett bestånd med en högre medelstamsvolym än om gallring inte genomförts. Gallring kan utföras enligt olika former, vilket påverkar produktiviteten i drivningsarbetet och beståndets karaktär efter utförd åtgärd. I vissa bestånd kan det finnas ett undre skikt av löv eller gran som försvårar gallringen, så kallad försvårande underväxt. Den här studien syftade till att undersöka om underväxtröjning är en åtgärd som kan leda till att minska kostnaderna i gallring i bestånd med underväxt. En tidsstudie utfördes i två talldominerade bestånd med lövdominerad underväxt i 2-3 meters höjd.

Interference in an ecosystem means a disturbance. When harvesting, forest roads have to be build to cope with heavy duty vehicles. Crossing brooks can not always be avoided. In this case bridges or culverts have to be built. There are many different kinds of culverts and depending on what type you choose and how you place the culvert, the watercourse and the water organisms can be harmed in different ways.

The wild boar Sus scrofa population in Sweden has increased rapidly in the last decades which has led to conflicts among stakeholders, for example due to crop damages in agriculture. Thus, there is an urgent need of quantified goals and effective strategies for wild boar management. To develop such strategies, knowledge on population dynamics is fundamental. In this study a deterministic matrix model was used to estimate population growth, based on previously published data. The exponential growth rate for a wild boar population was calculated to 1.48.

Sweden became a member of the European Union in 1995. When Sweden entered the Union the government also agreed on implementing every law, regulation and directive the Union have and will have in force. One directive the Union wants every country to implement is the Directive (93/104/EG) concerning certain aspects of the organization of working time. This directive includes regulations concerning the relationship between employer and employees. The regulations in the directive must be in force before January 1 2007.One of the main points in the directive is the possibility for the parties on the labour market to reach agreements through collective agreements that deviate from the legislation concerning work hours.

Syftet med denna studie var att utreda hur röststyrning kan användas för kontroll av aggregatet på en engreppsskördare. För att studera röststyrning genomfördes en så kallad Wizard of Oz-studie. Metoden går ut på att en människa ersätter en funktion i ett system som ännu inte finns eller är färdigutvecklad. I studien var det röstigenkänningen och inmatningen av korrekt respons som utfördes av en människa, trollkarlen. Rollen som trollkarl utfördes av en före detta skördarförare som numera arbetar som forskare på Skogforsk. Studien genomfördes i Skogforsks skogsmaskinsimulator. I den kan en försöksperson på ett verklighetstroget sätt arbeta med en engreppsskördare.

Scana-Booforge is a Swedish company which specialize in heat treatment of various metal. The treatments take place in quenching ovens, where fans are used to circulate the hot air. The fans used today do not have a satisfactory lifespan. This thesis aims to develop a new design of the fans for the quenching ovens, and the goal is that the new fans will bring cost savings for Scana-Booforge.The design development process started with mapping out the environment in which the fans operate, and with analysis of the existing fan structure and damages, in order to establish the cause of failure and of short durability. The performance of the fan were also established at this stage.

Vid gallring med normalstora skördare och skotare används vanligtvis noll, ett eller två beståndsstråk mellan stickvägarna. Arbetsmetodiken har studerats empiriskt, men med en begränsad omfattning per studie. Fördelen med simulering som studiemetod är att man med bra modeller över maskiners prestation kan jämföra flera gallringsmetoder vid inverkan av en stor mängd olika förhållanden. I denna studie har en matematisk prestationsmodell konstruerats för deterministiska jämförelser av dessa metoders drivningskostnad i förstagallring av tall. Modellen innehöll en spatial del för skördaren, med bl.a.

The concept of vulnerability is the capacity or the sensitivity to become damaged. Vulnerability are characterized by one or more of the following terms; a system´s sensitivity to exposure to shock, stress or interference, the state of the system in relations to a threshold of damages, and the system´s ability to adapt to the changing circumstances. Vulnerability in this study is referring to the sensitivity of the circumstances that lead to sustainable livelihood that can´t be maintain and that there is an inability to cope with and manage stress. The choice of making a study in this area is based on that action needs to be taken to moderate the vulnerable aspects of society, in this respect in relations to storms. Analyzes of the social vulnerability to climate change or natural events is needed for effective actions.

A common problem in forestry is plant death caused by frost. The risk of frost is highest on wind protected, flat or low-lying areas in the terrain. Here you often have regeneration problems with Norwegian spruce which is especially sensitive to spring frost. Swedish tree experiments have shown that the black spruce can be a suitable alternative on these areas, for example on moisture frost prone areas. The species originates from North America and its pioneer tree characteristics make it more frost hardy than Norwegian spruce.

As a company it is required to work with strategies to minimize costs such as packaging and logistic costs. The increased market of industrial produced wooden buildings results that the time and the cost which the packaging of prefabricated building elements consume, is experienced to be in greater need of development than before and demands a better solution. The aim with this dissertation was to discover how the development of the handling of the packaging can improve the packaging process. The goal was to present improvement proposals for a simplified and thereby a more efficient production in time and cost perspective.The packaging process which includes packaging, handling, storage and transport were studied. Interviews were made with participants from the market for manufacturers of wooden houses and a case study was made at the company A-hus.

The value of game for hunting from a social economic viewpoint is an interesting topic that is currently being investigated in a Swedish research program. The amount of damages that the game stocks cause to the forestry is, and has been in focus for a longer period of time. Something that I saw as missing was an investigation of how much an active game keeping measure might cost in lost incomes for forestry in terms of reduced acreage for forest production. This question was the foundation for this investigation, which purpose is to give interested persons with decent knowledge of forestry an example of how cost estimation for forestry resembling the example that is studied can look like. The measures that has been taken is a felling of forest in different ages on both sides of a forest dirt road to create increased asset of forage for the game, and at the same time give hunters that have their post along the dirt road a better chance of seeing passing animals early and increasing the possibility to shoot good shots. The area, which is a part of The Swedish Association for Hunting and Wildlife Management estate Öster Malma, is also used as an example for guests who wish to learn more about managing ungulates. These guests have now got the opportunity to get information on how big the costs are for the measures that have been taken. The main conclusions of this work is that changed timber prices and foremost a change of interest rate makes big differences on the result of the calculations.