This report covers the conceptual design of a new one person hybrid vehicle that is to be fast and convenient to drive on the roads. The vehicle is most of all supposed to be used as a commute vehicle but can also be used at other occasions as well.During the work with this project the group has focused on three larger areas, the outer design (body), wheel chassis and an ergonomically designed interior. The group was not able to just create these parts in 3D to get a trustworthy vehicle, hence number of other components and details were also created to get a better entirety.The outer design starts with idea generation and sketches and ends with a 3D model which is rendered to show how the final product is going to look. The design of the body has been going on during the entire work process due to new ideas and improvements that seemed interesting and had to be changed.The wheel chassis also started with idea generation, research and sketches. It ended up with a simulated 3D model which later on was mounted on the vehicle body to show how the vehicle is going to perform during usage.

At the Department of Technology and Built environment at the University of Gävle there was an interest to study GNU Radio, which is an "open source radio project. The project is based on that most of the radio signal processing is made in an ordinary PC. The idea behind this degree project was that in a laptop there are several radio transmitters/receivers that takes space, generates heat and transmit in varied frequency band etcetera. All these radio transmitters/receivers could be replaced with a Software Defined Radio system. It means that one common, general radio hardware is used to different communications such as: WLAN, Bluetooth, GPRS, 3G etcetera. The waveform is generated in the software, which makes the system very flexible.

Background: It is today common for companies to provide some sort of incentive for CEO's and senior management positions to motivate, retain and benefit employees within a company. This is in order to drive the goals of the CEO and management in the direction that is desired by the owner. Currently, the Swedish centre-right government has forbidden the use of such variable pay within state-owned companies. There are two different attitudes to variable pay, one that is in favour and one that rejects it. However most people agree on the fact that a well-functioning incentive scheme can be of great strategic importance for a company.Approach: has variable pay to CEO's had any effect on the company's profitability.Aim: the aim of the study is to compare companies who use variable pay to CEO's with companies that do not in relation to their profitability in terms of profit margins, yearly performance, returns on total capital and returns on equity.Method: the study uses a quantitative approach.

Detta examensarbete handlar om hur uppspänningen av slutväxelhus i fixturer kan förbättras för att erhålla bättre rundhet på slutväxelhusets lockhålsdiameter. Arbetet har utförts hos företaget GETRAG All Wheel Drive i Köping. Slutväxeln är en av komponenterna i GETRAG:s fyrhjulsdrift som fördelar kraften från motorn till bakhjulen. Slutväxelns ytterhölje kallas slutväxelhus och är tillverkat i aluminium. Slutväxelhuset spänns fast i en fixtur i en av företagets bearbetningsmaskiner kallad ?Heller 4? där det bearbetas i en rad olika operationer varvid den största innerdiametern med ett mått på 158 mm blir orund i tillverkningen.

Tidigare studier av IT i undervisningen har fokuserat på kvantitativ inventering av hur många datorer skolor har och antalet lärare som utbildats för att använda IT i undervisningen. Jag vill ta reda på vilka möjligheter som finns, hur vi använder oss av dessa möjligheter i vår undervisning och varför vi väljer att använda eller inte använda dessa möjligheter. Eftersom IT ständigt utvecklas borde det vara logiskt att sättet vi använder oss av IT i undervisningen tar jämna steg med teknikens utveckling. Syftet är att undersöka hur gymnasielärare andvänder sig av IT i undervisningen, vilka förutsättningar som lärare upplever finns för IT i undervisningen, vilken kompetensutbildning lärarna genomgår eller erbjuds och hur lärare ser på användandet av IT i undervisningen. För insamlandet av primärdata har jag som metod valt att göra en elektronisk enkätundersökning i en av Googles applikationer, Google Drive.

Abstract Title: The Future of ABC at Sandvik Tooling ? Incorporating ABC with information systems in order to drive business development from a cost point of view. Authors: Jenny Andersson and Camilla Salomonsson. Supervisor: Charlotta Johnsson ? Department of Automatic Control, Lund University.

Husums plant has a selection of different pulp pumps at bleaching plant 4 and 5. The displacement- (HC-pump, Sund Defibrator PTD-60) and centrifugalpumps (MC-pump, MCA 42-200, MCP 30/20) are of interest in this report. The centrifugal pumps are controlled by throttle valves, which result in an energy loss. Chemical mixers are used to mix ClO2 into the pulp before proceeding into a holding tower where the bleaching process occurs.The energy demand of the different positions has been measured or calculated to be used in comparisons against new equipment. Quotations were requested and delivered from Valmet and Sulzer.

The starting point of this study is that the news media in general strongly influence which topics determine the public agenda by their choice of what is considered newsworthy. The study is based on articles from two major Swedish daily newspapers, Svenska Dagbladet and Dagens Nyheter. The aim of our thesis is to establish how the environmental public debate as portrayed in the newspaper corresponds to the environmental discussion within the scientific (subject matter expert) field, that is taught by the academic institutions, or if the two materially differ. The environmental communication discourse at the academic institutions advocates ?episodic? formation as the driving force behind transformation of attitudes and behavioral preconceptions. This episodic formation is aimed at incentivizing change by creating intimacy to the incident by linking cause and consequence to the individual citizen instead of to society as a whole.

Getrag All Wheel Drive AB utvecklar, tillverkar och levererar fyrhjulsdriftssystem till fordonsindustrin. Företaget tillverkar systemets huvudkomponenter, vilka är en slut- och vinkelväxel som sitter placerade mellan bak- och framhjul.Idag mäts de ingående komponenterna samt växelhusen i monteringsflödet. För att skapa en mer flexibel monteringsbana, vill företaget se om det går att utföra mätningarna med annan teknik, samt om det då går att minska antalet mätstationer i flödet. Genom detta hoppas företaget på minskad kapitalinsats vid förändringar i design eller vid införande av en ny modell.Hela arbetet grundade sig i meningen: ?Minimering av mätning vid montering av PTU och RDU?, vilket höll öppet för egna idéer om både uppgift och utförande.

Hydropower is the largest renewable energy source available in today's society. Operation and production is handled by high-tech electronics. This thesis is done on behalf of Statkraft Sweden AB who wants to explore the possibility of replacing the hydraulic cylinder with an electric actuator, generally as well as a case of a small power station on the river Nissan. Whether it is the chaplain or francis turbine vanes are actuated by hydraulic cylinders. Because of Gustavsberg hydropower is inconstant operation, this report is based on power calculations, which are read and computed according to the available hydraulic diagram.

Background: Once upon a time the most important resources in an economy were tangible goods. Historically, Swedish company culture has been dominated by engineering and techni-cal innovation has been the focal point. Today, Intangible values drive product development and form a company?s differentiation. Intangibles have therefore become the most prominent resources in a company.

The wild boar was reintroduced to Sweden in the 1970´s from enclosures that they had escaped from and by a government decision in 1988 they were considered a part of the natural fauna again. The purpose with this report is to examine the effects of the wild boars? reintroduction both on their welfare and on other aspects, such as how their population growth affects Sweden. This was done by gathering information from scientific literature and by performing three interviews. Another purpose is to briefly overlook live trapping and other common regulation methods.

It is clear that media advertising is one of the crucial marketing tools for companies in order to promote their products and services. As we are moving towards more and more economic integration, both on a regional and global scale, the question about standardisation of media advertising has become increasingly important and is nowadays subject to discussion in most international companies. This thesis deals with the issue of standardisation in a region where the process of political, legal and especially economic integration is taking its course, but where cultural and linguistic diversity is still a remaining fact: Europe. The aim of this thesis was to investigate the potential gains from a standardised advertising approach but also to identify its limitations. Especially on a market place like Europe, with its diverse cultural and linguistic background, a fully standardised approach might be difficult to implement.

AbstractThe purpose of this essay is to discover the driving forces in top athletes, concerning training, body image and social positioning. Furthermore the object is to study how important being fit is for social reasons in today?s society. The athletes have been interviewed face-to-face and described their personal drive regarding training, their goals and the significance of the sport. They have also described how they see the image of the ideal body that currently exists within the field of sport and society and how training affects their own body image.

There are a great possibility to shorten the time between mowing and preservation by spreading of ley crops in connection to the conditioning. In this case the cellular respiration (the plants breeding that consume sugar until the crop is ensiled) should not continue as long and the forage will perhaps get a higher nutritional value. The capacity of the next machine could also be higher because the rake gives swaths with a lot of material. There is also a possibility that spreading of ley crops gives the material a more homogeneous content of dry matter and that gives a reduced growth of clostridium. This is particularly important when the method of harvest doesn?t include any mixing of the material like it does with a round baler or silagewagon.