On 1 January 2005, IFRS (International Financial Reporting Standards)was mandatory for all listed companies within the European Union. The introduction is to create a transparent and consistent reporting. Mainly to provide companies, investors and financiers the same access to world capital markets. Since the introduction of IFRS, the goodwill value is determined by annual impairment tests. If an impairment of goodwill is a fact the goodwill decreases in value.

With the climate change issues growing in importance on the social agenda, the field of urban masterplanning is of no exception when it comes to minimizing the carbon footprint in a variety of projects. The aim of this thesis has been to prepare the Carbon Critical Masterplanning tool, a software plugin for carbon dioxide emissions assessment developed by Atkins, to be used in Swedish conditions. The main targets were to improve the areas of the tool associated with energy conversion and renewable energy sources, and to test the tool in a real case. A planned construction of a new campus in Albano, Stockholm was chosen for the pilot study. A 3D model was built in the tool and the carbon footprint was calculated for a variety of combinations for energy supply to the future area. The results show that use of locally installed renewable energy sources can reduce the total climate impact when life cycle perspective is applied.

The aim of this report was to do a case study at a geothermal heating system which has been in operation for about 5 years, and study if its performance has changed during this period of time. A literature study about the processes involved was also done in purpose of background knowledge.The tenant-owner?s association Duvan at Petterslundsgatan in Uppsala installed year 1999-2000 a geothermal heating system. The purpose of this installation was that they hoped it would lead to a smaller usage of district heating which would lead to a reduction of the heating expenses for their buildings. The geothermal heating system consists of 19 energy wells and 4 geothermal heat pumps, and it is one of the first systems of that size in the region of Uppsala.

Linux is a growing operating system in embedded systems. Today, Linux is not only in heavy servers but also in cell phones, PDAs, cameras and other devices running on battery power. While current technology is more energy efficient, more and more technologies are implemented into a single unit resulting in an overall increase of power consumption.Low power consumption is an increasingly important feature of a system today. Lower power consumption means lower costs, less environmental impact, and longer life for applications that runs on batteries.This work compiles methods to reduce power consumption of Linux systems. The work includes examining whether the available opportunities are platform-specific or of a more general nature.

With the climate change issues growing in importance on the social agenda, the field of urban masterplanning is of no exception when it comes to minimizing the carbon footprint in a variety of projects. The aim of this thesis has been to prepare the Carbon Critical Masterplanning tool, a software plugin for carbon dioxide emissions assessment developed by Atkins, to be used in Swedish conditions. The main targets were to improve the areas of the tool associated with energy conversion and renewable energy sources, and to test the tool in a real case. A planned construction of a new campus in Albano, Stockholm was chosen for the pilot study. A 3D model was built in the tool and the carbon footprint was calculated for a variety of combinations for energy supply to the future area.

Energy efficiency has become a very topical issue that has been discussed throughout the European Union for preventing negative environmental impacts that have been associated with the consumption of energy. In the residential sector have mainly municipalities set strict requirements for the reduction of energy consumption while the renewable energy has been asked. Different concepts of low-energy buildings have been developed to reduce the cost of operation and maintenance in existing buildings such as in new ones.This thesis has aimed to minimize the energy cost of a large building which has had low energy consumption features originally. Energy reviews has been initiated in order to be able for showing how the house electricity could be carried out even more efficiently.The work was initiated through a literature study to clearly increase the reliability on the energy subject. Different concepts of low-energy buildings have been treated in connection with its specifications, afterward those have been compared with the obtained results.

One of the most important components of a harvester is the crane. Most harvester cranes are only possible to pivot (or horizontally rotate) at the crane pillar. Cranab in Vindeln, Sweden, has developed a new type of harvester crane which has an extra pivot point on the outer boom. This makes it possible to reach around residual trees, easing thinning work in dense stands. The aim of the study was to analyze if the use of a pivoting outer boom (POB) crane gave an increase in thinning production and if there were any differences in time consumption between the work elements for the POB crane and a conventional crane. A Valmet 911.3 equipped with a POB crane was used in the study.

Fluoroskopi är benämningen på kontinuerlig röntgengenomlysning av en patient. Eftersom patienten och även läkaren då utsätts för kontinuerlig röntgenstrålning måste strålningsdosen hållas låg, vilket leder till brusiga bilder. Det är därför önskvärt att genom bildbehandling förbättra bilderna. Bildförbättringen måste dock ske i realtid och därför kan inte konventionella metoder användas.Detta examensarbete avser att undersöka hur ortogonala s k. derivataoperatorer kan användas för att förbättra läsbarheten av fluoroskopibilder med hjälp av brusundertryckning och kantförstärkning.

Since the spring 2003 the tenant-owner home association the Terrace in Upplands Väsby municipality lies straight under the approach route to Arlanda Airport?s new third landing chute. Noise levels of over 70 dB have been measured in the area, which exceeds National Board of Housing?s, values for traffic noise at a terrace in connection to housing. By using the method of hedonisk pricing the essay tries to find out if there exists a willingness to pay to reduce the noise in the area.

All products will eventually end up as waste, which in a sustainable society has to be handled in an efficient and environment friendly way. This report focuses on waste fractions meant for combustion, often difficult to characterize. However, more homogeneous fractions that are treated biologically are also discussed.The study concerns the region of Borås, Sweden, where the waste plant Sobacken has provided a good starting point. On this site, fuel to the Energy-from-Waste plant of Borås Energi is prepared and the biological waste is treated through anaerobic digestion.One important part of the study has been to collect experience-based knowledge from the technical staff at Sobacken and Borås Energi. This information was compiled into an overview of wanted and unwanted fractions to the preparation plant and the boilers respectively.

By limiting our horse?s freedom of movement, we restrict their opportunity to forage, which is one of their most important needs. If their need of forage is not fulfilled it can lead to frustration, which might manifest itself in abnormal behaviour, like the oral stereotypies for example crib-biting. It is a held belief that the horse swallows air while crib-biting, which they don?t, and that swallowed air causes colic, and the belief that other horses can copy the behaviour, leads to the use of many methods to prevent the behaviour.

The aim of this study was to develop a simple model for calculating stock costs for bio fuel at Billerud Karlsborg and subsequently recommending a suitable stock level of bio fuel. The stock components considered in the model are GROT (branches and tops), bark, dry wood chips, raw wood chips from barking and sawdust. The calculations are based on a probability distribution of historical deviations between ordered and delivered volumes. The model presents two different ways to manage the supply in case of irregular deliveries. The first way is to stock enough volume to cover the deviations and the second way is to compensate with a quick purchase from the spot market (at extra high purchase prices).

The Swedish healthcare systems have over the past decades experienced a major reorganization that involves reduction of costs and cuts due to the financial problems that the public health system faced. Healthcare was criticized because it was considered to be bureaucratic and inefficient (Funck, 2007). The solution to this problem was to focus on other measures rather than the economic measures, such as modernizing the healthcare instead of cutting down. Implementing a balanced scorecard in a public sector as a hospital, perceived as failures. This is due to several factors such as communication, knowledge and expected time are not taken into consideration when implementing the scorecard.

Myanmar?s entry in Association of South Eastern Asian Nations (ASEAN) in 1997 brought about several economic and social changes. One important change is tariff reduction through the Common Effective Preferential Tariff (CEPT-scheme), which increased Myanmar?s export to countries outside the ASEAN. The increase in exports facilitated trade creation and investment creation for Myanmar.

To be able to handle tomorrows need for limited energy consumption we need to reduce our use of energy. The building sector stands for around 40 % of all energy consumption in the society. The government has put up a goal to reduce the energy consumption in our buildings with 20 % by year 2020 and 50 % by year 2050 compared with year 1995. To be able to do reach that goal we need a more energy efficient building stock.The main part of the energy used in our buildings is used for space heating. By installing ventilation systems with heat recovery on the exhaust air it is possible to use the heat-energy in the exhaust air to warm up the incoming air.