Heat, clock scew and frequency optimization are some of the problems a semiconductor designer must face. By splitting a synchrounous block into multiple pieces which comunicates asynchronously with eachother and provide them with independent clocks, these problems may be reduced. GALS (Global Asynchronous Local Synchronous) is a wrapper that wraps a synchronous block and provides it with a clock. Multiple GALS-elements will make the whole system. The clockfrequency may be independently adjusted between each block.

This master thesis is one part of a project, called ?StabSim?, with the purpose to develop a simulation model for the align and stabilisation system in main battle tank 122. The origin of this project is that it should be possible to make control analysis without risking any Hardware. Besides that it will be easy to change components in order to investigate the behaviour of the system. The report includes modelling of tower and weapon mechanics and also the modelling of the synchronous motors, which control these.

The project was based on a request to improve an already existing program and Hardware at the electrical engineering department at the royal institute of technology. For maximum ease of use, tests have been done on students to properly design the program for what it is meant to be used for. These tests have been transcribed and analysed, then brought back to the group in a discussion and then transcribed and analysed again, I call this process the ?four step process? (this process is presented and explained in chapter 6.4.). A part of this master thesis was also to analyse the four step process to enhance validity of this research.The project resulted in a new program with a new graphical view and features to help students and researchers to work with the technical tool for electromagnetic readings of planar objects.

This work aims to evaluate the possibility of using a graphical programming language to develop software for a digital signal processor. A fixed-point digital signal processor called Blackfin BF-537 is used for this. Instead of using conventional programming languages, like C or assembler, for software development the possibilities to use a graphical environment to fill the same purpose are examined. The development environment primarily used is NI LabVIEW, but also the use of Mathworks Matlab Simulink is investigated. A variety of programs consisting of various signal processing operations and utilities are developed using these development environments.

There are some key elements which distinguish a general operating system, such as Linux, from a Real Time operating system, such as OSE. The later belongs to the category of soft Real Time systems while Linux is a general operating system, with significantly improved real time properties after version 2.6. These improvements make it interesting to compare the two systems.When comparing two operating systems, there are a number of issues which have to be considered. One way to measure the performance of the systems is by studying the time consumption for the same functionality and Hardware.During the study, the items that appeared as the most important for the performance of the systems, were: process primitives, system primitives, interprocess communication, context switches and interrupt latency.This work demonstrates that it is possible and reasonable to do performance testing on two different operating systems. The implemented tests cover a number of basic functionalities, which appeared to be the most crucial ones for the performance of the systems..

The purpose of this Master Thesis is to analyze what suitable Hardware platforms there are on the market in order to build a low price control and information system for mobile applications, called small display module. The thesis will be underlying material for making a decision for further development. The result of the thesis consists mainly of a Windows CE kernel and a schematic for a CPU card, on which it would be suitable to build the display module. Another major part of the report is the introduction of different techniques that could be of interest when designing a processor based system. The processor architecture that was chosen is the x86.

Nimo Verken AB is the leading producer in the Scandinavia of drying cabinets. The construction has, with small changes, been the same since the 70s with a thermostat and a timer as controlling system. There was a wish to develop a modern cabinet which showed remaining time on a display and with energy saving functions.In this report we go through how it is possible to implement a digital controlling system, where remaining time is shown on a display and where it is possible to choose a preset ?program?.The report first presents the fundamental theory for a PIC, where we describe the different registers, how interrupts are handled, the internal clock function and how data is sent to control the different parts of the construction.Next the report presents and describes the new Hardware that is needed, such as the encoder, the temperature sensor and the display.After the theory we describe how the program in the PIC may be drafted. Last in the report we have the result of the tests of the temperature variations and the accuracy of the time..

The purpose of this project was to further develop and complete a quadcopter that had been built in an earlier course at KTH, so that it could be used for demonstration and education at the school. The quadcopter was at the beginning of the project completed when it came to Hardware, and there was some software functionality implemented but no system for automatic stabilization. The main goal of the project was to implement such a system, and to combine it with the previous functionality to make the quadcopter operable and able to fly. To create a functioning and stable ground multiple basic software features has been implemented, and on top of that additional software to improve the safety, stability and functionality. The most important part is the control system that is responsible for converting sensor and control signals to suitable motor values.

AbstractThis report is about the creation of a test system for development of a control system for a off the shelf RC-helicopter, which can be bought for about two thousand SEK. The test system consists of both electronics for controlling the helicopter and mechanical constrainer. The constrainer is used for mounting the helicopter so that it won´t crash.A circuit board including processor and sensors was manufactured. This was used for doing test of the different control algorithms. In this way were we able to analyze the quality of the sensors chosen, and what other sensors that could contribute to the control of the system.Basic helicopter control have been studied and presented in the report.

This essay is written at the university of Linköping and is a part of the teachers education. The intire essay is available on CD-rom. Its content is directed towards teachers who entirely or partly works, or want to work, in computereducation. The CD-rom contains both textmaterial and presentations, with teacherinstructions, wich are directly appliable in teaching computers. The teachingmaterial on the CD-rom is based on an empiric survey with different computerteachers.

This report deals with the design of a controller for SmartMedia? flash memory cards, based on a Hardware description found in the SmartMedia? Interface Library - SMIL. The design was made on logic gate level, using standard cells in OrCAD Capture. After simulation of the design in PSpice A/D, it was exported as an EDIF netlist, which was used to make a chip layout in L-Edit, a layout tool for making integrated circuits. The layout was made using a method called Standard Place and Route - SPR, where the layout tool places standard cells from a library and connects them according to the EDIF netlist.

Dagens moderna organisationer driver vanligtvis en kostsam IT-baserad infrastruktur. De besitter högpresterande funktionalitet och säkerhet för att garantera att de dagliga operationerna fortskrider. Mjukvarubaserade lagringsplattformar är ett alternativ som kan användas för att reducera dessa kostnader. Genom att efterlikna avancerad teknik som redan existerar i traditionella lagringsplattformar kan detta implementeras som mjukvara på commodity Hardware i syfte att uppnå samma funktionalitet. Ceph är ett alternativ som numera implementeras och ämnar erbjuda detta val.

This project examined the possibility to create an electronical aid with the purpose of increasing environmental awareness and to design the aid in a fashion that inspires other to develop similar applications. The impact of car traffic was examined, and the base of the aid was built up in modular form to simplify the Hardware aspect. For the active, data processing part of the aid the Arduino platform was chosen because of its simplicity and big possibilities of help in different internet fora, for those who choose to create similar applications in the future. The main part of the project var the use of real-time information from the car?s on board diagnostics.

This Bachelor thesis examines the possibility of replacing an outdated, analog video recording system to a digital counterpart. It is key that the video and audio signals remain synchronized, generator locked and time stamped. It is up to nine different video sources and a number of audio sources to be recorded and treated in such a manner which enables synchronized playback. The  different video sources do not always follow a universal standard, and differ from format as well as resolution. This thesis aims to compare a number of state of the art commercial of the shelf solutions with proprietary Hardware.

This Bachelor thesis examines the possibility of replacing an outdated, analog video recording system to a digital counterpart. It is key that the video and audio signals remain synchronized, generator locked and time stamped. It is up to nine different video sources and a number of audio sources to be recorded and treated in such a manner which enables synchronized playback. The  different video sources do not always follow a universal standard, and differ from format as well as resolution. This thesis aims to compare a number of state of the art commercial of the shelf solutions with proprietary Hardware.