Sök:

Sökresultat:

623 Uppsatser om Habitat mapping - Sida 36 av 42

AO modulen

This master thesis has been written in collaboration with Science Park Jönköping and is based on a problem related to corporate innovation. Science Park Jönköping believes that there is an untapped potential in existing industry in the form of ideas that are never commercialized. These theories are also supported in the research in which other authors have perceived that the ideas and inventions which do not belong to the core business risk ending up in drawers. If more of these ideas could be spin-offs or other forms of enterprise instead of staying in the drawers it would lead to growth, both for companies and for the society in large.The purpose of the thesis work is to, based on the case Science Park Jönköping, analyze how science parks and incubators can support the commercialization of ideas that derive from industry, who otherwise had been left lying. The work began with a mapping of the Science Park Jönköping operations and the skills they possess, and then other initiatives that aim to commercialize more ideas from companies were examined.

Sammanvägda avrinningskoefficienter i rationella metoden : en jämförelse mellan idag och 1970-talet

Storm water is rain and melted snow that runs off, primarily from impervious surfaces.Future storm water management is facing the challenges of increased precipitation, asclimate changes, and increased areas of impervious surfaces due to the expansion anddensification of the cities. Impervious surfaces reduce the potential for water to infiltratein the ground leading to increased surface runoff and higher peak discharge.The runoff coefficient is closely related to the percentage of impervious surfaces andrepresents the maximum percentage of a catchment that can contribute to runoff. In thisstudy, the objective was to evaluate the weighted runoff coefficient for three differenturban types; apartment buildings, townhouses and residential areas and a comparisonbetween today and the 1970`s was made.The runoff coefficient was determined by manual mapping of the different surface typesin each area based on data in the form of orthophotos and aerial photographs. The surfacetypes that were mapped were asphalt, permeable areas, tiles, sand/gravel and roof.Tiles and sand/gravel were the most difficult surface types to map. In order to see towhat extent these categories influenced the weighted runoff coefficient a sensitivityanalysis was carried out and the runoff coefficient based on surface type was changed indifferent scenarios.The results of the sensitivity analysis showed that the surface types tiles and sand/gravelhad little impact on the weighted runoff coefficient which in mainly due to the fact thatthe percentage of these surfaces types of the total area is small.The result of the study showed that the largest change in the runoff coefficient occurredin residential areas where the increase in the percentage of impervious surfaces causedby new roofs in the form of porches and garages and from paved or tiled driveways.

Kartläggning och analysering av produktionsplanering av order med specialkvalitet hos Stora Enso Packaging AB

This investigation?s task was to map manufacturing of special qualities at Stora Enso Packaging under a certain period, analyze if rules concerning special qualities is followed, which consequences this results in concerning use of paper, waste and costs and to give suggestions on alternative solutions. The goal was to give sugges-tions that help the company to reach its business ratio that the production de-partment uses within use of paper and productivity in the corrugated cardboard machine.Stora Enso Packaging is a part of the forest group Stora Enso and is one of Swe-den?s leading producers of corrugated cardboard. Stora Enso Packaging acts pri-mary on the Swedish market, where they have a market share of 25 %.To be able to analyze orders with special qualities we did a data collection during two months, where we mapped incoming orders.

Indexeffekten : En studie gjord på Nasdaq OMXS30 och OMXH25

AbstractMaster thesis in Business Administration, School of Business and Economics at Linneaus UniversityAuthors: Patrik Larsson and Pontus GislénSupervisor: Håkan LockingExaminer: Sven-Olof CollinTitle: The index effect- a study on Nasdaq OMXS30 and OMXH25Introduction: A significant part of the financial literature is based on the Efficient Market Hypothesis which assumes that prices in the market reflects all available information. Anomalies, such as the index effect, indicate weaknesses in this theory as it has been proved that it is possible to outperform the market using public information. Hence, the index effect can be linked to market efficiency which makes it interesting to study from a theoretical perspective. The mapping of the index effect is also interesting from a practical perspective, as it leads to a better understanding of whether investors and firms should take this anomaly into account.Problem: Is there an index effect, how does it behave and what can explain this effect?Purpose: The aim of this study is to investigate the index effect.

Production system mapping for product design

Detta examensarbete är resultatet av en utredning av produktionsbegränsningar och produktutveckling på Volvo Construction Equipment AB Component Division i Eskilstuna. Produktionssystemet på Volvo CE genomgår en stor förändring då det går från att fungera som en funktionell verkstad till att bli flödesinriktat. Detta gör att helt nya krav ställs på produkternas konstruktion och utformning. Det är nu inte möjligt att anpassa maskinerna eller operationsföljderna efter artikeln i samma utsträckning som tidigare, man kommer att vara tvungen att anpassa artiklarna efter produktionslinan. Därav har en litteraturstudie inom Concurrent Engineering gjorts som belyser hur man bör jobba som organisation och vilka verktyg man har till sitt förfogande, för att utveckla produktionsvänliga produkter.

Virtuell 3D-modellering som verktyg : vid kommunikation av Gruvstadsparken

3D modeling is a common tool in landscape architecture. Today, there have been new ways in which virtual 3D models are successful tools in the dialogue with the public. These new methods involve children and young people who are groups that is hard to reach and engage in citizen dialogues. The purpose of this work was to investigate how a virtual 3D model works in the landscape architect?s communication with the public through the project Gruvstadsparken in Kiruna. Through workshops, I wanted to communicate Gruvstadsparken to get ideas from participants on how the park can be used and be revisited.

Värdeflödesanalys med fokus på förbättring av ledtid och leveransprecision

Detta examensarbete har utförts inom borrstålstillverkningen på Sandvik Materials Technology (SMT) i Sandviken. Borrstål är en viktig produkt för SMT, vars efterfrågan har ökat stadigt under en lång tid och även i framtiden spås öka. SMT har länge strävat efter att höja leveransprecisionen på det borrstål som levereras, då leveransprecisionsmålet som i dagsläget ligger på 95 procent inte har uppnåtts på länge. SMT har även uttryckt önskemål om en kortare ledtid för tillverkningen av borrstål från råvara till kund, vilken historiskt sett uppskattats till åtta veckor.Syftet med examensarbetet är att, genom utförandet av en värdeflödesanalys, identifiera förbättringsförslag som kan effektivisera produktions- och planeringsprocessen vid ett tillverkande företag.De metoder som har använts för att utföra examensarbetet är litteraturstudier, observationer samt intervjuer. Utöver detta har prognos-, beställnings- och leveransdata samlats in med hjälp av de system som används på SMT samt även information kring cykeltider för de ingående processerna i borrstålsflödet.De mest tongivande teorierna som examensarbetet utgått ifrån och som författarna genomgående haft i åtanke är Lean Production, värdeflödesanalys, lagerstyrningsprinciper, linjebalansering och SMED.Genomförd kartläggning av nuläge och analys visar att kundernas prognos- och beställningsmönster inte stämmer överens av olika orsaker samt att balansen i borrstålsflödet inte är optimal.

Standardiserat utförande och förbättring av avropsprocessen : En fallstudie på Balco AB

Course: Degree project in logistics, 4FE05E, spring 2013Author: Maria WennbergSupervisor: Petra AnderssonExaminer: Helena ForslundTitle: Standardization and improvement of the outbound process execution Background: Transportation represents a critical part of companies? logistics. Special management and control is needed when using a third party logistics. Balco uses a third party logistics for their deliveries of balcony parts and before it takes place the outbound process is executed. Currently, Balco experience difficulties with the process? many ways to be performed by the project managers and logistics department.

Miljöbedömning : Miljökonsekvensbeskrivning för prövning av muddring i Natura 2000-området Nordre älvsestuarium

Nordre älv är ett av två utflöden från Sveriges största vattendrag Göta älv. Estuariet som består av älvens mynning och en del av skärgården, är speciellt med blandning av sött och salt vatten och är utpekat till bland annat Natura 2000-område. I framtiden är det ett möjligt scenario att flytta delar av sjötrafiken som idag går i Göta älv genom Göteborg, till Nordre älv istället. Förutsättningarna för sjötrafiken genom Göteborg förändras i takt med att staden utvecklas och förväntade havsnivåhöjningar kan fordra större skyddsåtgärder för staden i framtiden. Här spelar både samhälls-, ekonomi- och miljöaspekter roll och en sammanvägning av konsekvenser behöver göras.

Lagerhantering i framtiden på Aero Materiel AB

In recent years, increasing emphasis has been placed on streamlining the supply chain. Keeping inventory and warehouses is considered to be a waste of resources. It is however difficult to completely eliminate the need for inventory and warehouses in a supply chain. The purpose of warehousing is to provide a service for the customer. By keeping what the customer demands in inventory it is possible to make a quick delivery when a need arises.

Kartering av skogsskador hos bok och ek i södra Sverige med hjälp av satellitdata

Populärvetenskaplig sammanfattning: Kan satellitbilder användas för att studera skador på bok och ek?Sedan mitten av 1970-talet har man sett ökande skador på skogen i stora delar av Europa. Olika storlek på skadorna och att storleken på skadorna skiljer sig åt beroende på var man befinner sig har gjort det svårt att förklara orsaken. För att undersöka ifall skadorna även ökat i Sverige har Skogsstyrelsen utfört inventeringar på bok- och ekbestånd i södra Sverige under tre tillfällen; 1988, 1993 och 1999. Resultatet från undersökningen visar att konditionen hos bok och ek i södra Sverige har försämrats sedan den första inventeringen 1988.

Nätanslutning av vindkraft : vindkraftsbranschens aktörers perspektiv på nätanslutning och tariffer

Wind power is a growing energy sector in Sweden. However, it still represents only a small part of the total electricity production, about 0.7%. In order to create good conditions and to facilitate the establishment of wind power in Sweden, the government has for example, created a national centre for wind use. The objective has been to reach the governmental goal, which is an expansion of wind power by 10 TWh by year 2015 compared to the level in 2002. The Swedish electricity market was deregulated in 1996 which refers to the introduction of a competitive market in electricity production and trade.

Värdeflödesanalys av 9000E - serien diskbänkblandare hos FM
Mattsson AB

FM Mattsson är norra Europas ledande tillverkar av vattenarmaturer och lanserade i början av 2008 en ny produktserie, 9000E, där E står för ECOSAFE. Vid framtagningen av denna blandarserie har man designat produkten med material utifrån en miljösynpunkt, därav namnet ECOSAFE. Man har vid FMM upptäckt att ledtiden för Köksblandaren i 9000E-serien är för lång för att kunna möta ett ökande kundbehov och ökad konkurens. Man vill därför genomföra en värdeflödesanalys för köksblandarna för att undersöka varför ledtiden blir så lång och om den går att korta ner för att få en ökad produktionstakt. Huvudmålet med projektet har varit att ta fram ett förslag som ger en reducerad ledtid med >30% samt ge rekommendationer för hur detta ska genomföras.

Påverkan på yttre miljö ? Identifiering av miljöaspekter och riskkällor

The increased interest in a sustainable environment puts pressure on companies in the manufacturing industry. Rexcell Tissue & Airlaid AB (Rexcell) in Skåpafors produces paper to be converted into tabletop and hygiene products. Rexcell is certified according to the environmental management system ISO 14001, gaining competitive advantages by showing that the company works toward a sustainable environment and that they follow current legislation. The activities at the company are classified as hazardous to the environment according to the Environmental code. Every year, the activities are inspected by an independent inspector.

Att gestalta utifrån Jan Gehls teori och metod : exemplet Fyristorg

Att utforma stadens offentliga rum till inbjudande platser där människor vill vistas och kan mötas är en grundpelare i arkitekten Jan Gehls teori. Han har i närmare 50 år arbetat för en stadsplanering som sätter människan i fokus, och menar att ett socialt hållbart samhälle förutsätter människovänliga stadsrum. Fyristorg är centralt beläget i Uppsala stad och förutsättningarna för ett livligt stadstorg är många, men i dagsläget domineras torget av en parkeringsplats och platsens mänskliga aktivitet är låg. Syftet med den här uppsatsen har därför varit att, utifrån Jan Gehls teorier kring levande och människovänliga stadsrum, föreslå en övergripande omgestaltning av Fyristorg. Genom att applicera Gehls teorier och metoder i gestaltningen ämnar arbetet att svara på frågeställningen hur Fyristorg kan omformas till ett inbjudande stadsrum för människor att vistas i. Genom en litteraturstudie identifierade jag Gehls designprinciper för hur offentliga rum bör utformas för att främja aktivitet och interaktion. För att förstå torgets förutsättningar gjorde jag en inventering som sedan följdes av Gehls observationsmetoder ?mapping? och ?tracing? , där jag studerade den aktivitet och rörelse som idag sker på platsen .

<- Föregående sida 36 Nästa sida ->