The global climate-change means increasing mean-temperature and higher precipitation in Sweden, which leads to shorter periods of frozen ground in the forest. At the same time the harvesting machines are getting bigger and more powerful. The forest industry aim at an even wood flow, and the ground damage has to be as low as possible. The two biggest causes for ground-damage is the bearing capacity of the forest ground and the ground-pressure of the harvesting machines. The aim of this study was to find out some rules for the machine choice considering ground pressure, when harvesting on ground with low bearing capacity.A field study, using a Valmet 890.3 forwarder, was carried out where different ground pressures and their effect on the ground were tested on two different types of ground.Additionally, an inventory of damaged harvesting grounds was made.

For the past decades, culture has been given a role as a factor for local and regional development. But what is meant by development and in what ways culture can be of importance in this aspect can be unclear. This thesis examines the perception of the role for local and regional development of one specific cultural place and network ? the cultural cooperative Not Quite in Fengersfors, Sweden. I study the way the role as developer is expressed and interpreted in the discourse of the cultural workers who are members of the network and in the discourse of public cultural policy in the region Västra Götaland and in Åmål municipality.

The increasing threat of climate change has led to a increased need for models to predict future climat. In these models the changes in the soil carbon pools due to changes in microbiel degradation of the organic matter can lead to both positive and negative feedback-effects. There is however a lack of consensues on the temperature respons on degradation soil organic matter. This paper aim to give a better understanding on the factors controlling the temperature respons. The factors studied were the carbon substrate qualitity and the physiological status of the microorganisms.

This report presents a thesis project conducted by two students at Mälardalens högskola. The project covers 15 points in industrial design and was conducted during April to June 2014. The principal of the thesis works at Plastic Produkter. The assignment was to develop equipment for an effective way to dose, mix silicon, fill a special designed plastic bag and then seal it. The bag is then formed into a breast model.When a customer for various reasons decides to do a breast augmentation or a breast reconstruction, there may be doubt or uncertainty about the result.

AbstractThis bachelor thesis has been assigned by the company ACG Nyström, Borås. ACG Nyström is working in cooperation with a Swiss company named Jentschmann AG. Jentschmann is a manufacturer of ultra sonic welding machines which ACG Nyström is marketing in Scandinavia and the Baltic States. On behalf of Jentschmann AG the company has the aim to introduce the ultra sonic welding technique to new companies.The aim of this thesis is to compare traditional sewing machines with ultra sonic welding machines within two textile areas, protective clothing and outdoor living.Two investigative questions have been formulated for this purpose: what are the differences between a sewing machine and an ultra sonic welding machine? Is it possible to replace the sewing technology with ultra sonic welding? These stand as guidance for this paper.To gather knowledge interviews, literature studies, and tests on two different ultra sonic welding machines were performed.

Buffer zones play an important role for the water quality in our watercourses. When harvesting a forest close to a watercourse a buffer zone should be left. When it's not left, it will lead to radical changes in the environment for the water organisms. The overall purpose of this thesis was to illuminate the production- and environmental thinking when establishing new buffer zones in south of Värmland. The partials goals were to determine choice of tree species, ways of regenerate, occurrence of soil scarification and the occurrence of machine tracks in newly established buffer zones.

Hylocomium splendens (Glittering wood-moss) is a common species in the Nordic countries and can be found in many different types of boreal forests. It usually forms dense moss carpets on the forest floor. The shoots grow in segments and new segments form annually on the previous years growth. The size of the segments is probably regulated in a high extent by local micro environmental conditions. Previous experiments suggest increased growth of H.

This study was performed in an afforestation experiment established 1982 on an abandoned peat harvesting area, Flakmossen, in the province of Värmland, SW Sweden. The experimen-tal design include planting with Scots pine (Pinus sylvestris), in combination with various drainage intensities (20, 30, and 40 m between ditches), and fertilizer doses 0, 100, and 200 g PK per seedling applied at the date of planting. The aim of this study was to achieve more knowledge about the conditions on afforestation of peat harvesting areas, especially regarding drainage intensity and fertilization requirements, by means of determining the stand growth and yield in the Flakmossen trial. The forest growth did not differ significantly between the drainage intensities tested when the same amount of phosphor and potassium fertilizer was added. Thus, shorter distances between ditches than 40 m can not be recommended. When no fertilization was carried out seedling survival was very low, and the growth of sur-vived seedlings was poor. The largest diameter and height growth were observed in the areas where the highest dose of phosphorus and potassium (200g/seedling) was given.

This report examines the industrialization of a newly developed household machine on behalf of Technogarden Engineering Resources in Karlstad, Sweden. The report is a part of the final course in the Bachelor Program in Mechanical Engineering at Karlstad University and takes place in spring 2014.An innovator, an investor and a engineering consultant firm have through collaboration developed a new type of gruel machine. The product is in its final stage of construction and is planned to be manufactured in a production located in Sweden, autumn of 2014.To compete against today?s trend in outsourcing manufacturing to low cost countries for better profitability, the industrialization of the gruel machine must be done with a minimum amount of resources in order to become successful, which also describes the problem of this study. Using pre-study material in form of Lean production literature, visiting a successful production site and gathering data from involved engineers a specification was developed which describes what this industrialization must achieve and which requests can be accomplished.

The storm Gudrun in 2005 led to massive windthow damage in forests in southern Sweden. Since then there has been a growing interest in factors influencing wind damage in above all Norway spruce (Picea Abies) stands. Although many other interesting areas still need to be examined. In 2005 there where a lot of stands that suffered different degrees of damage, a lot of these stands weren?t cut, but instead left to grow. The future development of these stands is uncertain and the guidelines are unclear.

During the last ten years the cultivation of maize in Sweden has increased and is expected to grow further. Most of the maize in Sweden becomes silage which is used to feed animals at farms. Maize has in other countries been shown to be a substrate for growth of mould and especially Aspergillus spp., Fusarium spp. and Pencillium spp. has been reported.

GPS (Global Positioning system) and GIS (Geographical information system) has been used for planning and inventory in the forest sector for more than ten years. The last years the development has come to equip harvesters and forwarders with GPS and GIS (GIT). The goal with this study was to reach a basis for decision, how Stora Enso Skog should continue its investment in GPS and GIS in harvesters and forwarders. To reach this basis for decision, possible advantages and benefits, disadvantages and problems in the harvesting process was evaluated. The study was made as an interview study with four harvesting managers and ten machine teams. To secure the quality of the results an interview questionnaire was made before the interviews were done. The results showed that GIT will make the harvesting managers work easier.

The report assesses the typical questions regarding Corporate Social Responsibility within the automotive industry. An attempt as to whether Corporate Social Responsibility has an impact on growth companies is demonstrated. Volkswagen Group is within the required analytical criteria, which are to be studied. Also, the fact that they recently launched ?Strategy 2018? makes it even more interesting to immerse into.

This paper studies the option market?s implied dividend as a predictor of future equity market returns. We introduce this variable in the simple total return framework and discuss some complications of using it as a proxy for the expected dividend. We construct some regressions using the price-dividend ratio and the implied dividend growth, and test them on six years worth of data on the EURO STOXX 50-index. The main result is that implied dividend growth exhibits some forecastability over two-year horizons, but that the dataset is too short to draw any definitive conclusions about long-horizon forecastability.

Title: Nordea Life and Pension during financial crisis Subject: Business administration, Candidate thesis 15 p. Authors: Seyithan Öngörur och Adnan Yari Instructor: Peter Lindberg Date: 2010-01-13 Key words: Nordea, the financial crisis, advice, marketing, customer relationship Purpose: The purpose of the study is to provide an understanding of how the financial crisis has affected Nordea Life and Pensions market growth based on market share. We also want to give an understanding of what factors may be responsible for the outcome that it may be helpful in future financial crises. Method: A qualitative study was the basis for the study, where three interviews were carried out by the respondents from Nordea Life and Pension.  Theory: In this section we have focused on relevant theory and has divided them into different themes, advice, current legislation, marketing, consumption and buying behavior. Conclusion: The study shows that Nordea Life and Pension had a positive growth during the financial crisis and a number of factors are presented that may be the basis for the outcome.Proposal for further research: Since this study was limited to one company it may be intresting to investigate and examine the consuling industry market as a whole affected by the financial crisis. Contributions: This paper has provided an understanding of how Nordea Life and Pensions affected during a financial crisis, based on market share and the factors that may have been the basis for this..