Energy consumption is at present a major political issue, and numerous projects that comprise many nations are currently in process to increase energy efficiency and bring down energy dependency. As a member state of the EU, Sweden now faces the challenge of implementing substantial energy-saving measures until the year 2016. One of these measures is the project ?Green Islands? financed by the EU that intend on creating sustainable islands in areas around the Baltic Sea. The Archipelago Foundation leads the project that concerns the Stockholm archipelago, where focus has been placed upon decreasing energy usage in businesses and services on Utö among other islands.

This master?s thesis is a remote sensing study of an area-based method used to detect forest in need of thinning by use of laser data and field samples. Only pine-dominated forest has been included in the study and height limits were set to match empirical restrictions. The study area was in the municipality of Älvsbyn (Latitude 65° 40´ N, Longitude 21° 00´ E), in northern Sweden.The Swedish authority Lantmäteriet is currently laser scanning most parts of Sweden, providing new opportunities and applications. The primary aim of the national laser scanning is to create a new elevation model, useful in consequence analysis of climate changes.

The last hundred years humans have drastically changed the amount of available nitrogen in nature. Today human activities release twice as much available nitrogen as all natural processes are doing together. We also have degraded nature´s possibilities to take care of nitrogen through the draining of wetlands and straightening of rivers. In order to regain the potential of nitrogen retention in the water systems there now requires a reshape of the landscape we live in. A planned expansion of the mining activities in Garpenberg, Dalarna, would double the content of nitrogen in the waters below the mine.

Abstract Co-operation difficulties in the work place can be a problem serious enough. Co-operation difficulties can occur between employee and employer, as well as employees among themselves. Irrespective of between which individuals the co-operation difficulties occur, it will have negative consequences. These can consist of, for example that individuals might suffer mentally, inproductivity and also an unwished economic disadvantage for the employer. From the employers? side it is pointed out that it is important with employees who are possible to co-operate with in a satisfactory way.

For several years Uppsala University together with several companies has been involved in a WISENET project aimed at improving railway transport security. By placing a sensor system near the wheels of each wagon, the temperature of the bearings can be measured and transmitted to a collector placed centrally on the wagon. This in turn transmits the collected data to RFID receivers placed intermittently along the railway.As the signals are transmitted wirelessly, problems may occur as the antennas get dirty or coated with ice and snow. To determine the effects of these coatings, several tests were performed examining the reflection coefficient S11, the impedance Z11 and the efficiency eta of an antenna, and how they varied when various coatings were placed over the antenna. Examined coatings were ice, snow and water to determine the effects of weather, and various metal-based coatings: powdered iron both pure and partially oxidized, and iron ore granules.

Due to global climate change and the rising levels of greenhouse gases (GHG) in the atmosphere, the interest for seeking solutions for mitigation has increased. While much attention has been directed towards technical solutions such as carbon capture and storage (CCS), biogenic carbon sinks has also garnered significant attention. Previous studies have shown that coastal ecosystems such as seagrass meadows and mangroves have a much greater capacity for storing carbon (C) compared to terrestrial ecosystems. That raises the question if other coastal ecosystems, such as coastal wetland forests, that previously haven?t been considered as blue carbon habitats also contribute to coastal carbon sink capacity.

An emerging trend within the construction industry is the expectation of the customer to experience and sense the product, maybe even in a customized manner. The latter trend would extend the necessity of incorporating not only function and aesthetics, but also perception and sensation. To meet this trend while at the same time improve the productivity the use of information technology such as BIM and technical platforms has increased in construction projects. Nevertheless, in spite of large investments, the construction industry has not managed to increase the effectiveness and productivity as much as other industries. Evident is that successful use of information technology depend on the integration and collaboration of various experts in a continuous and dynamic process.

The purpose of this thesis work was to develop an automatic fault detection system for surveillance of bearing temperature in hydropower turbines. The parameters used except the bearing temperature were cooling water temperature and cooling water flow. A simple static model based on data sampled every minute was developed to estimate the bearing temperature. Then a detector for detection of change in bearing temperature based on the CUSUM-algorithm was designed. Since the amount of data was very small the developed model was too uncertain to be used in a working system.The designed fault detection system showed to work well for the available data.

Examensarbetet syftar till att konstruera operatörsgränssnittet till en UGV (eng Unmanned Ground Vehicle) för mobil rekognosering i tätbebyggt område. Operatörsgränssnittet består av både mjuk- och hårdvara. Till operatörsgränssnittet har ett grafiskt användargränssnitt utvecklats där tonvikten legat på användbarhet med funktionalitet för positionering med geografisk presentation och sensorpresentation. Förutom en presentationsenhet för sensorinteraktion och manövrering av farkost ingår en sändtagarenhet för kommunikation mellan operatör och farkost. Två uppsättningar av systemet levererades till försvarsmakten för användning vid metodförsöksstudier..

Structural rationalizations and regionalization of the agricultural sector in Sweden has lead to unevenness in thedistribution of plant nutrients. Nutrients are lost from crop producing farms as harvest products are sold, whilefarms with animal production often have manure in excess of their needs. In addition to this the retention ofwater and nutrients in naturally occurring wetlands has decreased due to a reduction of wetlands in number andsize in the agricultural landscape. This increases nutrient levels in agricultural run-off and causes eutrophicationas well as nutrient losses from arable soils. One potential solution to both problems would be to store nutrientrichsurface water from agricultural areas and use it for irrigation of agricultural crops.

Agricultural drainage ditches are links between fields, lakes and oceans, having the potential to transport e.g. sediment and nutrients. When in a good condition, drainage ditches can act as sinks for e.g. phosphorus and sediments and prevent eutrophication downstream. The aim of this study was to determine the condition of one agricultural drainage ditch and to come up with suggestions for appropriate measures. The aim was also to determine which of the ditch?s properties that were possible to evaluate visually, which processes they represented as well as which properties required complementary physical analysis. This in order to contribute to the work of developing a method for determining the status/condition of agricultural drainage ditches.

A prefabricated timber frame house previously built by Villafabriken AB has been modeled in Autodesk Revit Architectural, a 3D-program based on BIM-technology. This has been done tosee if it?s possible to produce the publications that Villafabriken demands from the designengineer?s work, and examine which possible extra values that may arise compared to traditional 2D-CAD drawing.BIM is short for Building Information Modeling. Everything is stored in a single database and a change in the project file is automatically updated across the project. BIM provides more than just drawings since information from the model can be retrieved in various ways such as lists and quantity schedules.It was possible to produce the publications that Villafabriken demanded using Revit, but BIM doesn?t only mean a new way of drawing, it also require a change in the company?s process were the information from the model is being used..

This paper deals with the opportunities for the technique of condensation, for wood fired household heaters, on the Swedish market. In this project the condenser is preceded by a scrubber and both energy exchange and separation of unburnt particles have been studied. The facility studied is connected to a wood stove at 30 kW. The tests would show that the effect from the stove never reached above 16 kW. This might be a result of the low temperature of the water going into the stove, from the condenser. In addition to this the wood was not of highest quality and the stove could have needed some maintenance before the tests.

This report is commissioned by the Water and Sewage Agency in The City of Mariehamn, Åland. The basic aim is to investigate positive or negative effects of a relocation of the sewage pipe from a wastewater treatment plant, Lotsbroverket. The environmental licence of Lotsbroverket is to be revised and The Environmental Appeal Board at Åland?s Government and Administrative Board has made demands that several possible locations in an outer water area should be examined. The present location of the sewage pipe is in Svibyviken, which has been classified as an ?inner water area?.The objective of this work is to study to which extent the nutrient loading from Lotsbroverket influence the environmental conditions in Svibyviken, and to investigate the suitability of different locations of the wastewater pipe from Lotsbroverket.The way a coastal area looks, i.e., its morphometry, determines to a large extent its ecological characteristics.

This thesis work has been carried out at the consultant company Pöyry Sweden AB in Norrköping, whom performs the task for E.ON heating Sweden AB, Händelöverket in Norrköping. The report shows methods to manufacture slurry consisting of fly ash and water. The slurry shall be pumped into several former oil storage rock shelters that E.ON has put into operation for the specific purpose. The ash mixture also develops hydrogen gas in contact with water.The work has aimed to produce different suggestions of methods and equipment that can be used for the objective. Mixing method and security issues were in centre while working with the suggestions.