This report is written on the assignment by Nexans IKO Sweden AB in Grimsås which is a cable manufacturing company. Nexans IKO Sweden AB was in need of help to examine possibilities for saving energy by saving compressed air, in first place by using the compressed air more efficient. The task was to determine the present situation, making the airwipe stations more efficient by reducing the consumption of the compressed air and in turn save money. Even the aspects of the working environment were discussed as the noise levels from the pneumatic systems and engines are usually high. A schedule over the airflow in the factory and the inventory over current airwipessituation was made.

The purpose of this essay is to present, from a theoretical framwork about regional democracy, possible methods to handle the regional democratic problems in Östergötland in Sweden and to investigate the opinion of the political parties regarding this issue. Both the national and the local/regional level are investigated. The contents of the essay is based on literature studies and interviews of politicians in Östergötland. Regional democratic problems that is discussed are the political responsibility and the power distribution between the political actors on the regional level. A solution of the problem could be to organize the regional society structure in accordance with one of the following organization models"Statligt regionalt ansvar","Kommuner i samverkan"or"Regionalt folkstyre".

This thesis conducted at the University of Uppsala investigateshow well a prefabricated building component from the manufacturerMasonite Lättelement AB can be incorporated into ahouse projected to accomplish the demanding criteria of a passivehouse. The thesis is organized as a comparison betweenthe prefabricated elements and an on-site built component fromthe passive house area of Oxtorget in Värnamo, Sweden. Theaspects investigated were air leakage, energy, moisture, economyand noise conditions.Results of the comparative analyzes shows that the prefabricatedproducts were capable of accomplishing the requirementsof passive houses and therefore this thesis should beviewed as a basis to confirm that the technology of prefabricatedbuilding components today in Sweden are mature enoughto be a significant part of the passive houses that are to be builtin the near future. The development of prefabricated technologyis of crucial significance if we are to accomplish the goalsof reduced energy consumption by the year 2020..

In this thesis proposals for different designs of a borehole thermal energy storage (BTES) have been developed for the building DN-huset in Stockholm, Sweden. To build a BTES results in savings in energy costs by approximately 44 %, i.e. 2 million Swedish crowns annually. Furthermore, a BTES would reduce the annual environmental impact with roughly 75-157 tonnes of CO2 equivalents per year, depending on how the electricity consumption?s environmental impact is estimated.

The interest in building low energy houses has increased along with the rising engagement inthe climate questions. With the advancing energy prices it is highly suitably for those whobuild and administer their buildings in long-term to build energy-saving houses. 40 % ofSweden?s total energy consumption constitutes of the energy in residences, therefore it iscrucial to take advantage of all the free energy as we possibly can. With crucial questions likequality of living and profit low energy building is a subject that concerns us all.Three proposals for apartment blocks are presented in this work on a real estate in Stockholm.Each proposal is developed through unique processes of design with the purpose to displaypossibilities to deal with the energy requirements of today and tomorrow through energybased architecture.The first proposal is an apartment block based on a traditional design process, the demands ofthe property owner and it?s affected by opinions from architects.

This master thesis is a study of the Swedish hydropower capacity to balance wind power. The Swedish government has decided that it should be possible to produce 30 TWh from wind power in the year 2020. The Swedish municipalities have to have plans for wind power plants with total yearly generation of 30 TWh. Wind power is an variable energy source that needs to be balanced by other energy sources. In Sweden the Swedish hydropower can be used for balancing a large scale introduction of wind power.

I takt med urbanisering och samha?llstrender har utvecklingen och samha?llsplaneringen av sta?der blivit allt viktigare. BREEAM Communities a?r ett relativt nytt, brittiskt, certifieringssystem fo?r stadsdelar och fungerar som ett verktyg samt bedo?mningsunderlag fo?r samha?llsplanerare. Verktyget fungerar som ett systematiskt underlag fo?r att kunna bygga ha?llbara stadsdelar och tar sa?ledes ha?nsyn till alla tre dimensioner av ha?llbarhet; sociala, ekonomiska och ekologiska.I Sverige har stadsdelscertifiering pa? senare a?r uppma?rksammats.

The aim of my thesis was to do a Life Cycle Assessment (LCA) of an average thread tap that is manufactured by Dormer Tools AB, and to create a practical model that the company can use in order to study other thread taps from an environmental perspective.The method of LCA is used to investigate the environmental effects of a product during its life cycle. This is a gate-to-grave analysis with focus on steel and thread tap manufacturing, coating procedure, use, waste management and transports. Three common coating types were compared separately. Steel manufacturing answers for the highest energy and raw material consumption under the life cycle of the thread tap. Its emissions contribute to global warming, acidification and eutrophication above others.

Sweden has an environmental goal to achieve until the year 2020. To achieve this goal the construction business has to take an initiative to use the modern techniques that are available to lower the energy consumption I buildings. There?s also a debate going on today regarding the energy demands set by the Swedish government through Boverket, some communities throughout Sweden thinks that the demands are to low and have therefore set up own demands regarding energy in buildings.The possibility to construct energy-saving buildings is today very great, with energy-efficient heating-systems and dense climate envelope. The interest to raise energy-efficient buildings have also increased as a consequence that the population have become more aware about their impact on the environment.

Stormwater in urban areas has been treated as a problem for a long time. The large proportion of impermeable surfaces inhibits the water from infiltrating in the ground to the same extent that it does in nature. This causes intensive surface flow during rain, which in turn causes inconveniences such as decreased accessability, floods and increased risk of desease spreading. Drainage through pipes is the traditional and usually functional metod for storm water disposal. That is as long as water flows are moderate. But precipitation varies naturally in amount and intensity and additional impermeable surfaces make some pipes insufficient for heavy or lasting precipitation.

Studenter är bland de som konsumerar mest alkohol i Sverige. Hög alkoholkonsumtion och extern akademisk locus of control (ALC) har liknande negativ effekter på studier. Denna studie undersökte relationen mellan alkoholkonsumtion, ALC och alkoholrelaterade studieproblem. 120 studenter, varav 91 var kvinnor, deltog genom att besvara en enkät bestående av The Academic Locus of Control Scale for College Students, the AUDIT Alcohol Consumption Questions och en egenkonstruerad skala som mätte alkoholrelaterade studieproblem. Data analyserades med en 2 (riskbruk/ickeriskbruk) x 2 (extern ALC/intern ALC) ANOVA för oberoende mätningar.

Denna kandidatuppsats behandlar miljöcertifieringssystemet BREEAM med fokus på processen och systemets effekter. I studien har pågående BREEAM-projekt i Sverige studerats för att undersöka vad som görs specifikt vid en BREEAM-certifiering, vad det kostar samt vilka nyttor en BREEAM-certifiering genererar.Bygg- och fastighetssektorn står för en betydande del av miljöpåverkan i Sverige idag och förhoppningen är att miljöcertifieringar av byggnader kan minska miljöbelastningen. Studien visar på att det finns en växande efterfrågan på miljöcertifierade kontor och lokaler från hyresgästen trots att innebörden än är något oklar.BREEAM är relativt nytt på svenska marknaden och behöver fortsätta att utvecklas och anpassas. Ett svenskt företag, med en redan god intern byggstandard, behöver dock inte göra några större åtaganden för att nå ett bra betyg i BREEAM. En BREEAM-certifiering intygar att en byggnad håller en bra nivå miljömässigt, visar att företaget är på väg åt rätt håll och hjälper till att strukturera upp miljöarbetet under ett byggprojekt.

Haptoglobin is an acute phase protein with important biological role because of its capacity to bind to haemoglobin. Haptoglobin exists in three major genetic polymorphism types: Hp1-1, Hp2-1 and Hp2-2, the distribution of which has been associated with abdominal aortic aneurysm (AAA), an asymptomatic aortic disease common among men older than 65 years.    Five different electrophoretic methods were tested according to their ability to separate the haptoglobin phenotypes. The detection was based on a produced hemolysate of blood in which haemoglobin binds to haptoglobin thereby forming a complex that can be detected by specific haemoglobin staining using TMB-dihydrochloride and hydro peroxide as substrate resulting in an azure-green color of the bands. Samples from 15 patients who had suffered surgery for not broken AAA, that is more than5.0 cmaortic diameter, and 15 samples from matched controls were analyzed.    Among the five tested electrophoretic methods best migration and separation was seen on the pre-cast agarosgel Hydragel HR on the instrument Hydrasys. The other four methods gave less successful results.

The regulations for energy consumption are consistently getting more and morestrict. This leads to a higher customer demand for energy analysis early in the buildingdesign process. Many building planners and architects use powerful modeling softwareto visualize their projects. These digital models contain sufficient information aboutthe building?s physical characteristics for reliable energy analysis.

The construction industry has demands on energy use in permanent buildings. How much energy that is permitted to use during the time the building is produced has no requirements. The purpose with this study is to learn how far Skanska has come with the work of making the building site more energy efficient.A literature study has been performed in the beginning of the study to survey what energy efficient arrangements that can be applied and how they operate. Using site visits and interviews the situations on the building sites have been studied as well as the energy efficient measure that are in use.Skanska has come a long way with the work of energy efficient building sites and they keep improving. They have improved half of their cabins so they use 50 % less energy.