The purpose of this thesis is to compare mass digitization and qualitative digitization, to see how the digitization process and the digitalized material differ. The study emanates from the mass digitization as it is performed at the National Library in Norway, and the qualitative digitization at the Royal Library in Sweden. The method used is document studies combined with mail interviews. The focus is upon the practical operation, to which counts: ?purpose & selection?, ?preparation, image capturing and processing?, ?metadata & text encoding?, ?quality assessment?, ?storage of digital originals and copies? and ?display?.

X-ray fluorescence (XRF) detection of heavy metals is a cost- and time-effective method for investigation of polluted areas. Compared to laboratory analysis, XRF analysis is limited by high detection limits and uncertainties in some situations. Preparation of samples is known to affect the results of measurements.The purpose of this thesis is to bring a deeper understanding of how different factors affect the results of XRF-analysis. A large number of measurements have been made with the instruments Niton XLt 700 and Niton Xli 700. Results from measurements of lead, zinc and copper have been analysed.This study has shown that a greater moisture content will give a lower measured concentration for the same sample.

In a column experiment the effect of three different biochars on nitrous gas emissions, nitrogenretention and water filled pore space (WFPS) were studied in a Swedish sandy soil, classified as aCryopsamment. Ammonium retention was positively correlated, while KCl-extractable ammoniumwas negatively correlated, with the specific area of the biochars. The question was raised whether thenegative correlation between extractable ammonium and biochar specific area reflects the amount ofammonium present in the soil or its extractability from the biochar, and whether methods forextracting soil mineral nitrogen, like KCl-extractions, have to be modified for application on biocharamended soils. There was a tendency of increased nitrate retention and KCl-extractable nitrate withbiochar and KCl-extractable nitrate was positively correlated with the specific area of the biochar. pHwas higher for all biochars compared with control, although the differences were not significant, andWFPS was lowered by biochar addition, significantly in one case.

At SIA TallOil's pellets factory in Latvia wood shavings and saw dust are dried with flue gases from a gas burner. TallOil wants to replace the gas with a biofuel that is available at the pellet plant. The reason for this is the unstable gas market in Europe in combination with the fact that TallOil wants to improve its profile as supplier of renewable bio fuels. In this project the technical and economical possibilities for a fuel conversion to ether bark powder, wood shavings or wood powder have been investigated. These fuels should be burned in one of the following applications: TPS BioSwirl, VTS Multifuel burner or Saxlunds bio fuel combustion plant Due to the fact that the fuel alternatives available are relatively common except for bark powder, the work has mainly been focused on bark powder.

Mechanization of Swedish agriculture started in the beginning of the twentieth century, to be able to have more animals without raising the number of employers. The horse business has not by far kept up with these cost savings solutions. Cleaning out stables and feeding horses are the most time-consuming tasks in horse stables today. The most common way to clean out the stable is still by shovel and wheelbarrow. The clean out process can easily be mechanized through semi- permanently beds with movable walls between the boxes so that the litter can be removed by a tractor or a loader.

With the increasing costs in concentrate the importance in producing ensilage with a high quality is becoming more and more important. To succeed with this goal it is of importance not only to harvest in the right period, but also to be able to store the ensilage without a decrease in quality and nutrional values. To maintain a good ensilage the covering of the ensilage must be carefully made. An unsuccessful covering causes mould to grow in the ensilage, which both increases the work load and also increases the amount of feed which is wasted. A bigger amount of spoiled feed also increases the risk of feeding spoiled feed to the cattle.

A third party access to district heating networks has been proposed in Sweden, to increase the competition on the district heating market. Such third party access could create opportunities for the agricultural sector as an energy producer. This study describes the technical, economical and environmental prerequisites for a farmer cluster to build and run a heating plant, fueled with local wood fuel. The heating plant in the described scenario is 8 MW and will supply a village of 1000 houses, and is fueled with wood chips exclusively. Supplying a heating plant with fuel puts high demands on the logistics, since there need to be a continuous flow of fuel. In the scenario, wood residues from felling and thinning is stored in stacks in the forest, and a few times a year chipped and transported to a storage area at the heating plant. In the study, an estimation of the profitability has been made by estimating the cost of the investment, personnel, operating and maintenance costs and costs for the fuel and ash handling.

The aim of this report is to investigate how the work handling at the department for arriving goods at EFG in Tranås is working, as well as how it could be improved and made more effective. EFG is a corporation who process and sell office furniture. The company is working with a project concerning delivery precision, the subject is therefore particularly interesting from the perspective of delivery accuracy. The number of orders has increased notably during the fall of 2005 and the spring of 2006. This has led to new demands at the department for arriving goods and the topic is as a result of that important also from this point of view.Interviews and investigations have been conducted at location since no written material earlier has been made in the topic.

I have together with Frimeko AB developed new hallway furniture for preschools. The background to the project is the fact that all the existing hallway furniture?s on the market today have a similar design and same features. None of the furniture stands out immediately. Companies who work with school furniture in general have been inspired by each other, and therefore is the collections monotonous.

Today every organization is committed to some kind of environmental scanning in order to get necessary knowledge of the world around them. The acquisition, organization and storage of information in combination with a strategic use, is today an important factor for a successful organisation in any sector of our society.In this Master thesis I have studied how an organisation such as The Confederation of Swedish Enterprise (Svenskt Näringsliv) handles its information resources. I have also looked at the flow of information within the organization. The Confederation of Swedish Enterprise is Sweden?s largest business federation representing 50 member organizations and 55 000 member companies.

In Stockholm, Johanneshov the Slaughterhouse area (Slakthusområdet) can be found. A number of companies have gathered there providing the Stockholmers with meat products. This area has a great need for cooling to supply large cold storages. To facilitate this, a central cooling system has been built, supplying the area with effective and safe cooling.The aim of this master thesis study is to give hints to energy efficient and reliable changes that can be put in place at a low marginal cost depending on the future activities in the area. The suggested changes will be presented to the company Bravida (managing the system), which also desires a deeper understanding of the energy flows through the central cooling system.Firstly visiting the site with proper guidance, we have then tried to understand the function of the system including which machines and media that are used.

The purpose of this Bachelor?s thesis is twofold. Firstly it aims to make a contribution to the understanding of how five Swedish Diocesan libraries have carried out the digitizing of their rare book and manuscript collections. Problem areas related to this activity are also investigated. Secondly, it aims to examine the relative guidelines and standardization norms, which have been formulated on a national basis.

En säker bakteriediagnostik kräver en korrekt provtagningsteknik, ett lämpligt transportsätt och rätt odlingsteknik. På grund av centralisering av verksamheter och ekonomiska begräsningar, är transport av prover till mikrobiologilaboratorium mycket vanligt. Detta medför behov av ett transportmedium som håller känsliga bakterier vid liv under långa transport- och förvaringstider. Dessutom skall transportrören klara av maskinell utodling som kräver ett vätskebaserat provtagningsmedium. Denna övergång minskar även arbetsbelastning och förbättra ergonomin hos personalen.

Vindkraftverk ansluts idag i snabb takt till elnät runt om i världen. Elnäten är ofta inte tillräckligt dimensionerade på platser där vindkraftutbyggnad är lämplig vilket leder till ett behov av nätförstärkning. Förstärkning sker konventionellt genom att övergå till en högre spänning, något som kan vara förenat med stora kostnader och ledtider. Bland annat därför har en filosofi med beteckningen smarta elnät uppstått, som handlar om hur elnätsystemet ska se ut när det är mer anpassat till de nya energikällornas karaktär och samtidigt medför ett mer effektivt totalutnyttjande. För vindkraftverk kan det då handla om att i högre grad än idag reglera produktionen och understödja nätet, t.ex.

The farm management system controlled traffic farming (CTF) aims to reduce soil compaction by restricting the field traffic from agricultural machinery to permanent traffic lanes. Literature and empirical findings show that soil compaction and field traffic from heavy machinery may affect crop growth negatively, reducing crop yields. If grass-clover leys are subject to heavy field traffic the botanic composition might be altered, providing a lower clover content in the forage. Clover as a silage feed is rich in protein providing good conditions for high yielding dairy cows. Grass-clover silage production is generally associated with intensive field traffic.