This thesis describes possibilities for Metso Paper to lower their costs of spray pipes for their pulp wash press TRPE, with maintained good functionality and quality.Information that can be used by competitors has been censored in this version of the essay.To find solutions, alternative suppliers have been contacted and asked to quote. There has also been a new spray pipe designed. The manufacturing costs of the new design have been calculated.The thesis also contains a concept generation of an alternative product to the spray pipes in installations where a high pressure washer is used.To be able to ask other manufacturers of spray pipes to quote, a demand specification based on the currently used spray pipe was made. This was then sent to two alternative suppliers.An investigation of earlier used spray pipes, and the currently used, shows that the nozzles are a big part of the total costs of the spray pipes. To attempt to reduce the nozzles high cost an concept generation was made to find the best solution for a new design.There was a request that it should be possible to change the internal brushes in the spray pipe without cutting and welding.

This thesis describes possibilities for Metso Paper to lower their costs of spray pipes for their pulp wash press TRPE, with maintained good functionality and quality.Information that can be used by competitors has been censored in this version of the essay.To find solutions, alternative suppliers have been contacted and asked to quote. There has also been a new spray pipe designed. The manufacturing costs of the new design have been calculated.The thesis also contains a concept generation of an alternative product to the spray pipes in installations where a high pressure washer is used.To be able to ask other manufacturers of spray pipes to quote, a demand specification based on the currently used spray pipe was made. This was then sent to two alternative suppliers.An investigation of earlier used spray pipes, and the currently used, shows that the nozzles are a big part of the total costs of the spray pipes. To attempt to reduce the nozzles high cost an concept generation was made to find the best solution for a new design.There was a request that it should be possible to change the internal brushes in the spray pipe without cutting and welding.

Bakgrund: Intracerebral hjärnblödning (ICH) står för omkring 20 % av alla cerebrovaskulära sjukdomar och uppkommer oftast snabbt, vanligtvis i samband med aktivitet. Är blödningen stor kan hjärnans mittstrukturer flytta på sig, vilket i värsta fall kan leda till koma eller döden. Datortomografi (CT) och magnetisk resonanstomografi (MR) är idag de vanligaste radiologiska undersökningsmetoderna för att upptäcka en ICH. Syfte: Att jämföra CT och MR vid diagnosticering av ICH, för att ta reda på respektive undersökningsmetods för- och nackdelar och därför kunna avgöra vilken metod som är att föredra vid diagnosticering av ICH. Metod: En litteraturstudie baserad på artiklar funna i databasen PubMed genomfördes, där åtta artiklar hittades vid sökning. Två artiklar hittades vid en manuell sökning. Resultat: MR är bra i ett tidigt stadium vid ICH. Gradient echos (GRE) roll vid MR verkar vara bra vid undersökning av ICH, men är likvärdig med CT, däremot tyder det på att GRE är mer noggrann än CT vad gäller mätning av blödningens volym, då den mätta volymen visar sig bli större med GRE än med CT däremot kan CT vara mindre tillförlitlig vid små ICH. Konklusion: Denna litteraturstudies resultat tyder på att MR är en säkrare diagnostisk metod vid ICH än CT, däremot krävs större studier inom detta område för att kunna dra en definitiv slutsats. .

This thesis describes possibilities for Metso Paper to lower their costs of spray pipes for their pulp wash press TRPE, with maintained good functionality and quality.Information that can be used by competitors has been censored in this version of the essay.To find solutions, alternative suppliers have been contacted and asked to quote. There has also been a new spray pipe designed. The manufacturing costs of the new design have been calculated.The thesis also contains a concept generation of an alternative product to the spray pipes in installations where a high pressure washer is used.To be able to ask other manufacturers of spray pipes to quote, a demand specification based on the currently used spray pipe was made. This was then sent to two alternative suppliers.An investigation of earlier used spray pipes, and the currently used, shows that the nozzles are a big part of the total costs of the spray pipes. To attempt to reduce the nozzles high cost an concept generation was made to find the best solution for a new design.There was a request that it should be possible to change the internal brushes in the spray pipe without cutting and welding.

Hungary?s share of renewable energy in 2010 was 7.9 %, and their renewable energy goal for 2020 is 14.65 %. Geothermal energy is one option that could help to achieve the goal, since Hungary has favorable bedrock, the temperature gradient is above average and thepermeability is high. Today Hungary is importing just over half of its primary energy supply. Because of political conflicts between nations Hungary wants to expand its own production of energy.

This thesis describes possibilities for Metso Paper to lower their costs of spray pipes for their pulp wash press TRPE, with maintained good functionality and quality.Information that can be used by competitors has been censored in this version of the essay.To find solutions, alternative suppliers have been contacted and asked to quote. There has also been a new spray pipe designed. The manufacturing costs of the new design have been calculated.The thesis also contains a concept generation of an alternative product to the spray pipes in installations where a high pressure washer is used.To be able to ask other manufacturers of spray pipes to quote, a demand specification based on the currently used spray pipe was made. This was then sent to two alternative suppliers.An investigation of earlier used spray pipes, and the currently used, shows that the nozzles are a big part of the total costs of the spray pipes. To attempt to reduce the nozzles high cost an concept generation was made to find the best solution for a new design.There was a request that it should be possible to change the internal brushes in the spray pipe without cutting and welding.

I havet finns det flertalet olika bakteriearter, alltså en hög diversitet vilket teoretiskt sett borde betyda en hög funktionalitet. I denna studie har vi undersökt hur bakteriers funktionalitet och diversitet påverkas av förändrad salthalt. Två marina bakteriesamhällen har studerats och jämförts, dels ett Skagerraksamhälle samt ett Östersjösamhälle. Dessa två samhällen utsattes gradvis för hög respektive låg salthalt och efter avslutat experiment hade Skagerraksamhället en låg salthalt dvs Östersjöbetingelse och Östersjösamhället övergått till hög salthalt (Skagerrakbetingelse). Resultatet av detta blev att både funktionalitet och diversitet påverkades, vilket analyserades med Eco-plattor och DGGE (Denaturing Gradient Gel Electrophoresis).

This thesis describes possibilities for Metso Paper to lower their costs of spray pipes for their pulp wash press TRPE, with maintained good functionality and quality.Information that can be used by competitors has been censored in this version of the essay.To find solutions, alternative suppliers have been contacted and asked to quote. There has also been a new spray pipe designed. The manufacturing costs of the new design have been calculated.The thesis also contains a concept generation of an alternative product to the spray pipes in installations where a high pressure washer is used.To be able to ask other manufacturers of spray pipes to quote, a demand specification based on the currently used spray pipe was made. This was then sent to two alternative suppliers.An investigation of earlier used spray pipes, and the currently used, shows that the nozzles are a big part of the total costs of the spray pipes. To attempt to reduce the nozzles high cost an concept generation was made to find the best solution for a new design.There was a request that it should be possible to change the internal brushes in the spray pipe without cutting and welding.

The effects of dexmedetomidine and butorphanol sedation on skin reactivity during intradermal testing in healthy dogs were evaluated. The effects of dexmedetomidine and butorphanol were compared to medetomidine, a sedative agent having scientific proof of not interfering with skin test reactivity, in a randomised, double blind, cross over study performed on 8 adult dogs. The dogs were sedated with medetomidine (Domitor vet.®, 0,01 ml kg-1) intravenously, or dexmedetomidine and butorphanol intramuscularly (Dexdomitor vet.®, 0,01 ml kg-1; Dolorex vet., 0,01 ml kg-1) after which they received intradermal injections of positive control solutions (histamine 0,1 mg ml-1, 0,05 mg ml-1, 0,025 mg ml-1), a negative control solution (0,9 % NaCl) and allergen extract (Dermatophagoides farinae, Cladosporium and Artemisia vulgaris). After a wash out period the trial was repeated with a reversed sedation protocol.Skin reactivity (wheal size, induration and erythema) and quality of sedation (immobilization, response to stimuli and injections as well as over all working conditions) were evaluated. The combination of dexmedetomidine and butorphanol provided reliable, good sedation and analgesia without adverse effects.

There are several methods avaliable to find areas of interest, but most fail at detecting such areas in cluttered scenes. In this paper two methods will be presented and tested in a qualitative perspective. The first is the darg operator, which is used to detect three dimensional convex or concave objects by calculating the derivative of the argument of the gradient in one direction of four rotated versions. The four versions are thereafter added together in their original orientation. A multi scale version is recommended to avoid the problem that the standard deviation of the Gaussians, combined with the derivatives, controls the scale of the object, which is detected.

Nowdays an efficient production is critical to achieve for companies competing on the market for steel cutting tools. One of such companies is Halmstad based Tooling Support Halmstad AB that manufactures threading-taps, threading-dies and parting off tools, towards a centralized warehouse in Schiedam, Holland. The large amount of different products, approximately 2500 is a big contributor to the problem along with a new order system that creates a demand of low setup times. Previously the company was forwarded orders through quarter based prognoses which enabled planning of the production over a longer time span. Currently the newer order system ZENIT is in use and the company thereby gets their orders weekly.

Forestry affects most of the forest-covered land in Sweden. In the landscape, the most common stream type is headwaters, which are important sites for many processes and organisms in both the terrestrial and the aquatic ecosystems. The aim of this study was to investigate how the abundance of benthic invertebrate functional feeding groups in headwater streams develops after clear-cutting and if it also is possible to detect a change in the composition of feeding groups. The study also attempts to determine what factors have an effect on temporal changes in abundance of these groups. For the study, 11 sites in northern Sweden were sampled for benthic invertebrates using a Surber-sampler, and for each site canopy-cover and pH was obtained.

Syfte: Syftet var att undersöka om och i så fall hur ackommodativ facilitetsträning, med +/- 2,00DS-flippers, under en vecka, påverkar ackommodation, vergens och binokulärseende.Metod: I studien undersöktes 17 försökspersoner mellan 20-30år. Av dessa fick 3 försökspersoner avbryta medverkan på grund av olika skäl. Försökspersonerna ombeddes att sitta på 2 synundersökningar, varav en före och en efter ackommodativ facilitetsträning. Undersökningarna inleddes med ett objektivt refraktionsvärde, följt av en anamnes. Därefter utfördes en binokulär synundersökning tillsammans med binokulära mätningar, varav en mätte den ackommodativa faciliteten.

This project investigated how elevation and vegetation type influences variation in plant litter phenolic content and protein precipitation capacity among and within common plant species for two different vegetation types, heath and meadow, in a subarctic ecosystem in the Abisko region of northern Sweden. As nutrient availability generally decreases with increasing elevation as a result of decreasing temperature, I hypothesised that phenolic content would increase with elevation and be higher on the heath than the meadow. To test this, the total phenolic content and protein precipitation capacity was estimated in leaf litter from 13 species in both heath and meadow vegetation across an elevational gradient ranging from 500 to 1000 meters above sea level (m.a.s.l.) in the study region. The results showed that elevation and vegetation type both had a strong impact on both variables. Total phenolic concentrations decreased with elevation for the meadow, and were greater for the heath than the meadow.

The problem of separating a non-rectangular foreground image from a background image is a classical problem in image processing and analysis, known as matting or keying. A common example is a film frame where an actor is extracted from the background to later be placed on a different background. Compositing of these objects against a new background is one of the most common operations in the creation of visual effects. When the original background is of non-constant color the matting becomes an under determined problem, for which a unique solution cannot be found. This thesis describes a framework for computing mattes from images with backgrounds of non-constant color, using Bayesian statistics.