Fossil fuels are affecting our climate negatively and there is a limited amount of them in the world, which leads to the importance of finding alternative fuels. One alternative is biogas, which is produced though a digestion process of different organic materials in a biogasreactor. Organic substrate that comes from farms has the biggest potential to increase the production of biogas in Sweden. Primarily crops from farms, but also waste products like manure are of great importance.Today there is a calculated theoretical potential for biogasproduction of 14TWh per year, which is around ten times larger than Sweden?s production today.

Voltage sag indices are a way of quantifying the performance of the power supply, as far as voltage sags are concerned. Indices can be defined for individual events, for individual sites, and for a whole system. A standard method for single-event methods is part of IEC standard 61000-4-30.This thesis emphasizes the importance of voltage sag indices and different methods for calculating three-phase voltage sag characteristics. Three-phase events measured in a medium network voltage over period of one month were analyzed, results examined and statistically evaluated. An algorithm for calculating voltage sag characteristics and indices was created in Matlab.

95% of the productive forest land in Sweden are now being exploited for forestry. The new Forestry Act of 1993 equate the goal of production and the environmental goal which means that the objective for forestry is a sustainable yield, while the biological diversity must be preserved. Recent years results from the inventories of the Board of Forestry show declining trends in how nature conservation aspects taken into consideration at the felling sites.The aim of this study is to investigate what happends with the nature consideration taken at felling sites in the long run. 20 final fellings in the county of Östergötland were re-inventoried 7-9 years after final felling. These felling sites had previously been inventoried before final felling (P0) and one year after final felling (P1) in the inventory Polytax by the Board of Forestry.

The purpose with this project was to invent a product that secures buildings sewersystems against rats. The problem was presented to us by a local building maintainer inHalmstad, who had experienced big problems with rats in his real estate. The project hasbeen carried out by Per Johansson, Robert Lidén and Niclas Nilsson under our ownauspices. We are primarily sponsored by AMLI Business Partner but also byInnvationsgruppen, Halmstad Fastighets AB and Anticimex.To be able to secure a whole building with only one product we came to the conclusionthat the product must be placed in the horizontal sewer pipe that connects with themunicipal sewer system. Our goal was to invent a product that prevent rats from passingand at the same time not affect the water flow.

The study presented here is about how to make the special needs user who has a profound intellectual disability and additional disabilities more involved in their implementation plan. Based on a life story interview the study aims at analyzing perceptions of procedures to enhance special needs users? influence. The method used in this study was a qualitative research approach as an overall approach in order to use a narrative method where life history is the method. The focus has been to study a part of an individual life history - a specific domain in the life of the interviewee?s working career.

Denna slutreflektion kommer att beskriva planeringen och utvecklingen av en alternativ sorts arbetsmetod kallad Cloudmetoden, vilken lämpar sig för mindre arbetsgrupper som utvecklar digitala medier (i vårt fall spelproduktion). Slutreflektionen kommer att innehålla beskrivningar om vilket typ av problematik som gjorde att vi valde att skapa ett eget sätt att arbeta. Vi diskuterar och jämför vår arbetsmetod med redan existerande projektmetoder inom digitala spel. Vi kommer nämna de produkter som har skapats med hjälp av vårt arbetssätt och hur vi arbetade med dessa. Nyckelord: Cloudmetoden, spelproduktion, projektmetod, alternativ, digitala medier.

This thesis is an investigation of Iranian immigrants and their use of libraries in Sweden. It isbased on a combination of a qualitative and a·quantitative method.Using a qualitative method, I give an outline of the history of lran from ancient times up to the present, as well as the different ethnological groups in Iran and their cultures. The main objective of this part is to clarify the contrasts between Iranian and Swedish cultural, social, linguistic and family structures, and also the characteristics of the crisis that most immigrants go through on their arrival in the new country. The qualitative method also involves structured telephone interviews with eight highly educated Iranians.This method was supplemented by a quantitative study through questionnaires of the attitudes· of lranian immigrants to libraries and reading. Iranians in Sweden turned out to be frequent Iibrary users.

Hungary?s share of renewable energy in 2010 was 7.9 %, and their renewable energy goal for 2020 is 14.65 %. Geothermal energy is one option that could help to achieve the goal, since Hungary has favorable bedrock, the temperature gradient is above average and thepermeability is high. Today Hungary is importing just over half of its primary energy supply. Because of political conflicts between nations Hungary wants to expand its own production of energy.

Formgivning och organsiering av ett nytt operahus. Strukturering av befintligt program, val av material, konstruktion och struktur, klimat, hållbarhet..

In order to avoid harmful substances ending up at the municipal sewage treatment plants, it is important to purify the wastewater at the source. One such source is the wheel washers available in many tire garages which are used to wash the wheels on our vehicles when we change between summer and winter tires. It is important to wash the wheels before storage, to extend the tires lifetime. The purpose of this study is to find a green innovative solution for reduction of emissions of heavy metals at the source, so that the sludge from the sewage treatment plants can be used as fertilizer. The target is to find a wheel wash method which leads to compliance with the guidelines for car washers, and that also provides a better washing result than with the existing method.

This essay examines how art could be used to bring forth and clarify the Catholic doctrines of purgatory. The research questions are: ? How are the Catholic Church?s doctrines of purgatory illustrated in art? ? How can the paintings affect the viewer and his/her notion on how to shorten the time in purgatory? How can art itself be used as a tool to achieve that goal? The timeframe of the chosen paintings is mainly 14th to 16th century but an overview of how the purgatory has been illustrated after that time until the present is also given. In order to answer the first research question, a painting from the 14th century has been analysed, using a method inspired by Patterns of Intention - a theoretical framework formulated by Michel Baxandall. A reception theoretic perspective according to Kemp, is used on a painting from the 15th century to answer the second research question. The results show that purgatory is illustrated as fire and the souls are depicted as living people, despite that a spiritual condition is visualized. The viewers at that time found the descriptions frightening, but the paintings also revealed ways of being granted indulgences, that is shorten-ing the time in purgatory. These ways were praying, making pilgrimages and giving alms.

Compressed air is an energy source that is widely used in today's trucks and buses.Compressor located next to the engine supplies the pneumatic system with the compressed air and is lubricated with the engine oil. Some of the oil follows the air flow in both liquid and solid phase. The solid phase, namely the carbon particles are created due to the high temperature in the compression chamber.Oil- and particles carryover softens and destroys the rubber material in the air valves and disturbs the mechanical function of various components in the pneumatic system. In order to reduce oil- and particles carryover is an Air Processing System (APS) set downstream the compressor.No method for establishment of oil- and particles carryover from the compressor exists at the moment. Therefore the filtration efficiency of APS is currently unknown.

This master thesis is about access to literature translated into Swedish sign language for deaf at the public libraries. It is by now a well-known fact that there is produced very little literature in sign language for deaf. This is so even though the policies for the library nationally and internationally, and the public law for libraries in Sweden says there should be literature available for all groups of disadvantaged people. People who have problem reading ordinary ink books have the right to get the book adapted into a medium accessible for them. The goal of the Swedish law for disadvantaged says that in 2010 Sweden should be accessible for all irrespective of weather you are deaf or not.

This Masters thesis work describes a comparison between two different methods for estimation of the down channel (base station to mobile subscriber) in Wide-band Code Division Multiple Access (WCDMA). The first estimation method, Optimal Feed-forward Channel Estimation (OFCE), is a conventional method that bases the estimates on data that is known to both sender and receiver, so called pilots. The second method, Decision Directed Channel Estimation (DDCE), is an elaboration of OFCE. It also uses user data for estimation. Simulations show that DDCE, in comparison to OFCE, does not attain an improvement in signal-to-noise-ratio (SNR) for high bit error rates (BER).

ABB and Prevas have initiated a collaboration to sell a system to optimize steel industry furnaces, called FOCS. The purpose of this thesis is to investigate possibilities for integrating Prevas FOCS and ABB 800xA.The result of the investigation is used for an implementation of a prototype of the integrated system. The study shows a general method that can be used when implementing two software systems. The prototype of the integrated systems is made with usability principles in mind. This is a very important aspect in order to create a good working environment for the operators of a steel plant.