Avdelningen för reaktorteknologi på Alfa Laval har identifierat svårigheter vid förmedlingen av kunskap till potentiella kunder. Examensarbetet innefattar utveckling och produktion av en film avsedd för utbildning och marknadsföring av Alfa Lavals flödesreaktorer, ART® Plate Reactors, för att förbättra Alfa Lavals sätt att förmedla kunskap till och fånga intresse hos potentiella kunder på mässor.Målet med examensarbetet är att filmen ska användas på kemiteknikmässor där reaktorerna ställs ut, och syftet med arbetet var att med mässbesökarnas förkunskaper som bas utveckla en film som väcker intresse och samtidigt fungerar som ett lärandemedel.Genom intervjuer har information om hur mässor går till, önskemål om filmens utformning, samt bedömning av besökarnas förkunskaper samlats in. Dessa intervjuer, samt litteraturstudier inom området för kemiska reaktorer och lärande med animation och kommunikation på mässor har legat till grund för arbetet med framtagandet av filmen.En storyboard utvecklades, och lade grunden för produktionen av filmen som gjordes i samarbete med filmbyrån Upper/First i Malmö. Produkten av examensarbetet, filmen, finns att se påhttp://youtu.be/PyoX3mVXuYc.Nyckelord:Storyboard, Multimodalt lärande, Kontinuerliga flödesreaktorer, Reaktorteknologi, ART® Plate Reactors.

The Swedish building stock accounts for nearly 40 percent of the total energyconsumption in the country. Properties built today are likely to last for 100 years orlonger. This places high demands on long-term and smart energy solutions that willkeep the future Swedish building stock energy consumption at low levels. This thesishas focused on examining how the energy performance of buildings is affected bydifferent choices of window types in different cardinal directions. The objective wasto obtain a basis for recommendations on how window properties can be optimizedfor different types of buildings and orientations.

Emhart Glass AB är en världsledande internationell tillverkare av automatiska glasformningsmaskiner för framställning av olika glasprodukter bl.a glasflaskor och glasburkar. Emhart Glass AB har i dagsläget 14 kontor i 10 olika länder och är sedan 1998 ägt av Bucher Industries. Den svenska divisionen är uppdelade i två enheter. I Örebro tillverkas maskindelar, reservdelar och strategiska komponenter. Komponenterna skickas sedan vidare till Sundsvall för del- och slutmontage.På Emhart Glass Sweden i Örebro har det uppmärksammats att långa ställtider förekommer vid vissa maskingrupper.

This report covers the thesis done by mechanical engineering at the engineering program at the University of Halmstad. Student Work Development of packaging in the food industry includes 15 credits and has performed over 20 weeks in spring 2009. The thesis work is a compulsory part of education and aimed at the student must apply the knowledge it has given during training in a project related to reality. Student work has been carried out in cooperation with Hanson & Möhringen AB and the project's main objective was to develop an environmentally friendly packaging to their brand Falk Salt. When salt is one of the world's cheapest commodity was packing all the costs have to be as low as possible.

Emhart Glass är världsledande tillverkare av automatiska glasformnings¬maskiner för framställning av bland annat glasflaskor. För att möta marknaden på ca 200 miljarder glasbehållare per år vill Emhart Glass utveckla sin produktion mot flödesstyrning och ett utjämnat flöde. Syftet är att minimera ledtider för att kunna reducera genomloppstiden samt hålla låga lagernivåer. Små lager och kort genomloppstid ger en lägre kapitalbindning. På Emhart Glass Sweden AB i Sundsvall där examensarbete har utförts sker montage från minsta detalj till färdig glasformningsmaskin.

AbstractThe purpose of this study is to examine how children interact with each other and what social positions they assume when using the learning pad. The social positions reffered to is the Owner, the Participant and the Spectator, defined by Ljung Djärf (2004). According to Ljung Djärf (2004), the Owner is defined as the one in control of the mouse and keyboard. The Owner is expected to be in charge of what is happening on the screen. The Participant is typically found on a chair near the computer.

A Swedish electronics company wants to make the cooling of one of their electronic components more efficient. They propose that a retrofit liquid cooler is the way to achieve this goal. The current air cooling has high energy cost due to the high amount of power needed to power fans and heat exchangers. Using high volumes of air for cooling also leads to noise pollution. The conversion from air to liquid cooling would possibly make the operation of the electronics more cost efficient and less noisy.The purpose of this project is to theoretically evaluate different concepts of drawing the heat generated by the electronic component in to a fluid, using numerical calculations in Matlab and FEM simulations in ANSYS.

The division of Electricity at Uppsala University runs a project called Lysekil project, they have designed a buoy that uses the waves to create electric power from a generator attached to the bottom of the sea.Uppsala University is closely connected with the company Seabased and the university makes use of their facilities in Lysekil. When they designed the buoy issues occurred, the geometric design was flawed, brackets with a short shelf life and it is generally uneconomic.A study visit was done in Lysekil on Seabased facility. With this visit the project started, which is to improve the design of the buoy and the attachment of wires leading to the generator. In this project we have chosen to use a beam system with three beams that are attached to the buoy. Then a wire attached to a plate that sits between the beams will be leading to the generator. Two proposals for construction are created, what distinguishes them are the brackets between the beams and the buoy.From these constructions, the design that is considered most optimal for our project is chosen.All parts of the buoy have been modeled and the drawings are designed in ProEngineer software.The two constructions are compared with each other, but the whole focus is on the second and final structure. The report begins with an introduction describing Lysekil project, and a task description of our project.The project aims to produce an optimal buoy that will be easy to design, materials restrictive with good durability and an economical solution.Wave power true function has been studied, mechanical and finite element analysis of beams, buoy and plate design.This has been presented in this report, where in the various chapters can read more about the processes. Although the relevant facts and information on this project and buoy development is included.

I dagens samhälle projekteras alltmer komplicerade byggnader, samtidigt som projekteringen av den enskilda byggnaden skall ske i en allt snabbare takt. Detta har onekligen bidragit till att det blivit allt vanligare med datoriserade hållfasthetsberäkningar, som ofta baseras på finita elementmetoden istället för de klassiska handberäkningmetoderna. Frågan som många då ställer sig är huruvida resultaten skiljer sig åt mellan de olika beräkningsmetoderna, och i så fall på vilket sätt? För att kunna besvara denna fråga har detta arbete inletts med en genomgång av de klassiska handberäkningsmetoderna, vilka bygger på gränslastteori. De viktigaste egenskaperna för varje metod har redovisats och förklaras.

Henriksson, I & Jönsson, M. Den svenska glasburken. En diskursanalys av Statens Offentliga Utredningar/ The Swedish glass jar. A discourse analysis of official government reports. Examensarbete i Socialt arbete 30 poäng.

This is a paper about the social services waiting rooms. Our aim with the study has been to:?Describe and problematize the physical environment in social services waiting rooms. A wider purpose is to lift the question about the waiting room as a significant part of peoples encounter with the social services.? To be able to achieve this purpose, we have used two questions: What does the physical waiting room environment look like in social services in Stockholms län? How can we understand and problematize the physical environment factors impact on people who visits these environments? We have observed and photographed ten waiting rooms in ten different social services in Stockholms län.

In Sweden there are 1894 small-scale hydropower plants in operation, which together generate 4.3 TWh of electricity per year according to Swedish hydropower compound (SVKF, 2011). This corresponds to the annual consumption of about 860,000 Swedish households (based on an annual consumption of 5000 kWh). In the mid-1950s there were around 4000 small-scale hydropower plants in operation in Sweden before cheap fossil fuels and uranium competed with them, in the current situation only 1,894 of these are in use. If slumbering small hydropower plants once again would be taken into use and some new ones are built, we would be able to extract about 7 TWh of renewable electricity from these annually in Sweden, representing about 1.4 million households.The thesis intends to calculate and construct a hydroelectric power plant at the existing dam in Olofsfors and give suggestions on how the power station should run during the time that fish migration is greatest in Leduån.The turbine and generator to the station in Leduån at Olofsfors is designed by the height of the fall and the water flow through the dam. The turbine selected for the station is a CK-1000RM turbine with a 4-pole 250 kW generator from Cargo & power turbine Sweden AB, which is expected to deliver 1.2 GWh per year.

The division of Electricity at Uppsala University runs a project called Lysekil project, they have designed a buoy that uses the waves to create electric power from a generator attached to the bottom of the sea.Uppsala University is closely connected with the company Seabased and the university makes use of their facilities in Lysekil. When they designed the buoy issues occurred, the geometric design was flawed, brackets with a short shelf life and it is generally uneconomic.A study visit was done in Lysekil on Seabased facility. With this visit the project started, which is to improve the design of the buoy and the attachment of wires leading to the generator. In this project we have chosen to use a beam system with three beams that are attached to the buoy. Then a wire attached to a plate that sits between the beams will be leading to the generator. Two proposals for construction are created, what distinguishes them are the brackets between the beams and the buoy.From these constructions, the design that is considered most optimal for our project is chosen.All parts of the buoy have been modeled and the drawings are designed in ProEngineer software.The two constructions are compared with each other, but the whole focus is on the second and final structure. The report begins with an introduction describing Lysekil project, and a task description of our project.The project aims to produce an optimal buoy that will be easy to design, materials restrictive with good durability and an economical solution.Wave power true function has been studied, mechanical and finite element analysis of beams, buoy and plate design.This has been presented in this report, where in the various chapters can read more about the processes. Although the relevant facts and information on this project and buoy development is included.

A passive house in Norra Djurgårdsstaden drawn by Tengbom Arkitekter is going to be built. A shaft for airing is needed for a few apartments in the house.The airing shaft is designed for a few two room apartments in the house, which are not able to achieve satisfactory airing, as their outer walls are facing a single direction. The other apartments on the same floor are corner apartments. These apartments do not have the same difficulty with airing since they have their outer walls in different directions, with different pressures at the facades. The airflow in the airing shaft is supposed to be driven only by natural forces, by the sun. The purpose of natural driven forces is to achieve low energy consumption for the house.In this thesis, a design of the shaft for airing has been developed.Initially an open shaft for all apartments was analyzed.

The park at Svaneholm is a place, the history of which is very little known today and the needfor better knowledge has been the cause of this investigation. The essay is primarily limited tothe time from late 17th century up to the end of the 18th century and takes stand on profoundinvestigations in accessible map-and archive material. The results presented show a manorhill, which during the course of a hundred years was subject to several changes and in bigparts consisted in other than park/garden.Burman related to the manor hill containing a cowshed, a large dam and a parterre garden isix quarters and it is plausible to think, that this establishment generally was built as producedon the plate.In the 18th century the construction is being changed, they go on building at the cowshed andin 1707 there are totally 268 livestock on the farm. In 1723 the garden is represented in amuch bigger scale than on the plate from the 1680:s, but it is not possible to tell, whether it isnew or not.Parts of the parterre garden is remaining during the whole of the 18th century, for the leastuntil it is being squared, but on two of the squares there was built a riding-groundMoreover the cowshed burnt down and was only partially reconstructed.The image given by the archive material is at the same time variegated. The inventory list ongarden tools from 1726 gives an image of gardening more directed to growing and pathshuffling, while the possibilities of keeping the parterres were fewer (e.g.