The purpose is to illustrate the phenomenon of self-harm from a social psychological and sociological perspective. The purpose is furthermore to examine the role social relationships play in the individuals´ self- imagine and what role does identification play for anyone who harm themselves? We want to examine in what way social relationships are important and how they function for individuals who harm themselves, both once they have started to harm themselves, and if the relationships in any part caused the cutting to begin with.Questions:How do individuals shape their identity based on self- harm? Which self-image do individuals have who self-harm? Is there anything in the person's previous social relationships that have caused them to begin to hurt themselves?Method:In this paper we have analyzed five autobiographies. We have used open coding from grounded theory as analytical method and subject positions based on discourse analysis.Theory:We have used the Cooley concepts looking glass self, Foucault's theory of power, Giddens' concept of ontological security and existential anxiety.Results and Analysis:We found six different categories that we thought were central. These were negative self-image, guilt, lack of family support, negative experiences of others' views, the protective identity as self- harmer and insecure social relationships in school.Conclusion:The self-harming is a very complex behavior.

The Goal with this Master of Science thesis is to expand the possible turbine efficiencymeasurements on an exhaust turbocharger. It was done as a part of the CICERO competencecentre. To feed the turbine with air a special flow rig has been used. Instead of loading theturbine by just restricting the compressor flow a docking system for an electrical dynamometer isdesigned to use the dynamometer as an additional loading source. By using an electricaldynamometer as loading device for the turbine, measurements are not depending on compressorperformance.A large part of the work consists in designing accessories for the dynamometer.

Interior window shutters can be found in historical buildings, but they are an uncommon occurrence in modern buildings. In modern contemporary construction, large glass panels are often the ideal because of increased light inflow and for architectural purposes. However, this can generate several negative effects, such as increased energy loss, lack of privacy and high sunlight penetration. Problems that window shutters could have accommodated historically. This thesis identifies a lack of knowledge about interior window shutters in the Swedish building stock.

The purpose is to illustrate the phenomenon of self-harm from a social psychological and sociological perspective. The purpose is furthermore to examine the role social relationships play in the individuals´ self- imagine and what role does identification play for anyone who harm themselves? We want to examine in what way social relationships are important and how they function for individuals who harm themselves, both once they have started to harm themselves, and if the relationships in any part caused the cutting to begin with.Questions:How do individuals shape their identity based on self- harm? Which self-image do individuals have who self-harm? Is there anything in the person's previous social relationships that have caused them to begin to hurt themselves?Method:In this paper we have analyzed five autobiographies. We have used open coding from grounded theory as analytical method and subject positions based on discourse analysis.Theory:We have used the Cooley concepts looking glass self, Foucault's theory of power, Giddens' concept of ontological security and existential anxiety.Results and Analysis:We found six different categories that we thought were central. These were negative self-image, guilt, lack of family support, negative experiences of others' views, the protective identity as self- harmer and insecure social relationships in school.Conclusion:The self-harming is a very complex behavior.

The surface finishing technique called black oxidation is currently being used on thetool holders made of low alloyed tool steel produced by Sandvik Coromant. Blackoxidation isn?t considered a sufficient technique because it doesn?t make the toolholders look like the quality products that they actually are. The reasoning behind thisis that the tool holders can show signs of corrosion after prolonged storing times orin countries with high humidity and temperature. The corrosion doesn?t decrease thetool holders performance, but the customers might believe otherwise.

The thesis aims to compare differentpiping materials in heating systems interms of cost as well as to illustratethe impact of energy characteristics ofdifferent materials over its servicelife. The methods used for costcalculations regarding piping are alsoto be examined to highlight thedifferences between template basedcalculations and more carefully executedones. The work is delimited to discusspipes of steel, copper, plastics andcomposites. The aim is that the resultcan be compiled to illustrate the prosand cons of various materials whenevaluating investments.The main object of the survey is part ofa heating system in the office-block KVSommaren located in southern Stockholm.The configured piping system is designedwith the mentioned piping materials andis used to make up the data for flow andcost calculations. The differentmaterials are calculated in both aconventional manner with a supplementarycost for additional fittings and with amore accurate quantification of thecomponents.

The thesis evaluates a new kind of bearing arrangement in a traction motor that ABB hasdeveloped. Since the arrangement is designed in a new and innovative way it needs to beevaluated to see if it is safe to use. In today?s traction motors, bearings with a big internalclearance (C4-clearance) are used. The basic idea of the new arrangement is to reduce the fitsbetween the bearing and shaft/house.

Finnhamn is a group of islands that are located in the middle north part of Stockholm?s archipelagos. On the main island Stora Jolpan there is a camp called Sommargården, which consists of eleven different buildings in various sizes. The assignment given by the Archipelago foundation (Skärgårdsstiftelsen) is to analyze if it?s benefited to replace Sommargårdens current heating system that consists of electricity radiators, with a more energy efficient heating system. This research is done with help of the literature review and a visit to Finnhamn in order to map Sommargården?s current state and its energy usage.

I denna uppsats har vi studerat hur företag arbetar för att minska antalet sjukskrivningar. Detta genom att titta på vilka förebyggande samt rehabiliteringsåtgärder som olika företag vidtar. Faktorerna bakom sjukskrivningarna är många, de kan vara psykiska eller fysiska och bero på arbetsmiljön, arbetsuppgifterna eller problem på det privata planet.Våra frågeställningar har varit; vilka de största orsakerna till sjukskrivningar är, hur företag går tillväga när en sjukskrivning uppkommer, hur arbetet med att minska sjukskrivningar ser ut samt vilka effekter detta arbete har.Den teoretiska referensram som vi använt oss av handlar om förebyggande och rehabiliteringsåtgärder. Vi tar även upp möjliga orsaker och arbetsgivarens ansvar då vi tycker att det är nödvändigt för att få en förståelse av situationen.Vår empiri bygger på intervjuer med personer från tre företag; Korsnäs AB, Scana Steel Söderfors AB och en organisation som vill vara anonym, därför kallad Organisation X. Den personalansvariga på varje företag har fritt fått berätta hur deras företag arbetar med att minska antalet sjukskrivningar.Det vi kommit fram till i denna uppsats är att företag är medvetna om vilka kostnader en sjukskrivning medför och hur viktigt det är med förebyggande åtgärder.

Research question: How does the industrial company Scania work to get more women in leadership positions?Purpose: The purpose of this work is to describe how companies in a male-dominated industry can work to get a higher share of female leaders.Method: This survey was based on a deductive approach with a qualitative method. Theories have been obtained primarily from scientific articles and the empirical part has been collected through interviews from the companies Wiminvest and Scania.Conclusion: The conclusions the study came up with was different elements that companies in male-dominated industries can work with to get a higher share of female leaders. The first thing that companies can do is to join the project BON or similar projects to work on this issue. They can work with workshops and lectures to disseminate knowledge about the topic.

I dagens samhälle tas miljöfrågor allt oftare upp i den allmänna och politiska debatten och ett aktivt miljöarbete är något som i allt högre grad krävs av företag från bland annat myndigheter och miljöorganisationer. Stålindustrin är inget undantag och får därför ofta kritik för att de åtgärder som vidtas inte är tillräckliga.Inom stålindustrin genomför företag ofta investeringar för att minska sin miljöpåverkan trots att avkastning på det investerade kapitalet uteblir. Den institutionella organisationsteorin förklarar dessa handlingar som direkta konsekvenser av likriktning. Det fenomen som studeras i studien är spridningen av miljömedvetenhet eftersom denna anses ligga till grund för investeringarna i miljöåtgärder inom den svenska stålindustrin. Formatet för studien är en fallstudie där den empiriska datainsamlingen skett genom tryckt material och intervjuer.Det kan konstateras att det studerade företagets miljöarbete påverkas i stor utsträckning av andra aktörer inom det organisatoriska fält som företaget tillhör.

Concept - detail - buildingStockholm International Fairs, new main entrance I studied at the KTH School of Architecture from 1995 to 2000. After completing my studies I wanted to work in an office that had a structural way of thinking and that knew the building process; I therefore chose to work for Rosenberg Architects. I have worked on a number of projects, among them several for the Stockholm International Fairs, from the Rica Talk Hotel and Hall AE, to the new main entrance.In the projects we undertook at the School of Architecture we had to identify and draw details that were central to our concepts. I have here identified some key details that we considered to be essential for the concept in a built project; the new main entrance of the Stockholm International Fairs completed in 2013. The entrance has complex logistics with multiple intersecting flows: exhibitors, employees, journalists, VIPs and others.

AbstractTitle: It is not necessary to be the best, but I don?t want to be average Author: Maja Benca & Emma Ender Tutor: Hedvig EkerwaldPurpose: The purpose of this thesis was to identify the subjective experiences of stressors and demands of law students of Uppsala University. Beyond these problems, this thesis was also identifying if there was a balance or conflict between social life and studies from a social psychological perspective. This essay is based on five key questions: How does the subjective experience of stress and demands affect the interviewed law students? How do the interviewed law students handle the stress and demands in their studies and in everyday life? Do the interviewed law students consider there is a balance between social life and studies? How do the law students want to present themselves in front of classmates and teachers? What do the interviewed law students consider to be the main goal in life? Method/Material: The material used in this thesis consists of a total of ten interviews with law students of Uppsala University, five women and five men in the ages of 20 - 32.

This thesis was performed at Zetterbergs Industri AB. Zetterbergs is designing, building and mounts body systems for trucks, including dumpers and tippers. The assignment for the thesis was to design a door hinge for a spreader gate. The spreader gate is the top of the two tailgates on a dumper or tipper and opens back and outwards when tipping the cargo. The spreader gate controls the mass flow of the material being tipped.

This thesis has been made in cooperation with the forestry machinery producerEco-Log in Söderhamn. The focus of the thesis has been to find a cheaper wayto open the large engine hood of the company?s harvesters. The goal was tofind a solution that could increase the value for the customers by being saferand simpler to use, or, at the least, keep these values at an equal level comparedto the previous solution.In order to make it possible to CE-mark the new solution, it was importantMachinery Directive that came into effect from the beginning of 2010.To begin with, a specification of requirements was set up. Thereafter, anumber of different basic concepts was retrieved and evaluated.