This report describes the construction of a climate-cabinet for testing of HV-cards (High Voltage) produced at VG Scienta. The main part of the report describes all the different components of the cabinet. The most important parts are a PID regulator from Eurotherm model 2408, a solid state contactor (SSC), a thermocouple, a finned resistor from DBK and different fans. The report even includes the connection between components by cable wiring, isolation, grounding, fuses and shaping of metal goods.As the cabinet also communicates with a computer, the report includes the solution of the data communication using the software iTools from Eurotherm. The communication part includes information about a converter that converts EIA422 to USB.The cabinet was produced at a company, called VG Scienta, in Uppsala during the spring 2010.

Lättelement located in Örnskoldsvik AB is one of Sweden's leading companies in the development of building elements in the form of roofs, walls and floors made ??out of light beams. The company has clients from Lund to Kiruna, and from Norway. This means that the elements have high standards when they have to take many different loads from wind and snow due to such wide geographic variation.The roof elements are structured so that the main body is made of light beams with an I?profile.

With a growing population on earth the amount of end-of-life vehicles (ELVs) and other scrap steel increases. The European Directive 2000/53/CE? requires a minimum of 95 % reuse and recovery and 85 % re-use and recycling no later than 1 January 2015, for end-of life vehicles. This imposes a need for more efficient recycling and recovery. Despite this shredder residue (SR) is commonly land filled.This report investigated the magnetic fines residue generated at Stena Metall shredder facility in Halmstad, Sweden.

For several years Uppsala University together with several companies has been involved in a WISENET project aimed at improving railway transport security. By placing a sensor system near the wheels of each wagon, the temperature of the bearings can be measured and transmitted to a collector placed centrally on the wagon. This in turn transmits the collected data to RFID receivers placed intermittently along the railway.As the signals are transmitted wirelessly, problems may occur as the antennas get dirty or coated with ice and snow. To determine the effects of these coatings, several tests were performed examining the reflection coefficient S11, the impedance Z11 and the efficiency eta of an antenna, and how they varied when various coatings were placed over the antenna. Examined coatings were ice, snow and water to determine the effects of weather, and various metal-based coatings: powdered iron both pure and partially oxidized, and iron ore granules.

This essay focuses upon the Kivik monument and its conservation difficulties, since its discovery at 1748 until modern time. The Kivik monument is found in southeast of Scania, and dated within the Bronze Age period. The perspective of the conservation on the monument has merely been on the monuments inner cist of stone and the rock carvings on the cist-slabs. When the monument was first archaeological examined at 1931, its sizeable cairn (75 m in diameter) had almost vanished and the cist was sheltered by a casing of concrete and metal roof. Between 1932 and 1933 the monument has undergone a large-scale restoration, and this criticized restoration resulted in a low antiquarian value with the responsible authority.

Idag är Suzuki Garphyttan AB (SG) en del av Suzuki Metal Industry Group vilket är ett Japanskt företag. SG är världsledande inom tillverkningen av avancerad fjädertråd som används till olika fordonsapplikationer. Kärnverksamheten hos SG är tillverkning och försäljning av ventilfjädertråd, plattråd och profiltråd, oljehärdad tråd, rostfri fjädertråd samt fjädrar. SG har tillverkning av bland annat ventilfjädrar till lastbilar i Fjäderfabriken som är beläget inom fabriksområdet i Garphyttan. Fjäderfabriken genomför ett förbättringsarbete med avsikt att lägga om sin funktionella produktion till linjeproduktion.

Uppsatsen går ut på att undersöka om det finns skillnader på tekniker som används vid mixning av basinstrument i musik avsedd att spelas på dansgolv som t.ex. house, trance, hip hop, R n´B, osv. och annan musik som vanligen spelas på radio, TV, Mp3-spelare, bärbara datorer osv. som rock, metal, jazz, pop, osv. Musik som är dansinriktad och spelas på dansgolv upplevs oftast som starkare i basen, då den också har basinstrumenten som den viktigaste för att skapa ett ?groove?.

The purpose of this thesis is to investigate if vacuum insulation panels are a competitive alternative to traditional insulation.Vacuum insulation has been used as insulation in buildings in Germany and Switzerland for a few years. In Sweden the high-performance insulation material is mainly used in refrigerators, freezers and vacuum thermoses. The development is proceeding well and vacuum insulation is becoming more common in the construction industry. Since it is a relatively unexplored material on the market there are many flaws and problems with the material.The questions we have chosen to answer in this report include an increased knowledge of vacuum insulation, various problems that may arise when handling/installation and the pros and cons of vacuum insulation compared to standard traditional insulation.The methods we have chosen to use in this report is a literature study, interviews with various suppliers and manufactures and calculations to show the differences between traditional and vacuum insulation. Vacuum insulation is 5-10 times better insulation than standard traditional mineral wool insulation, mainly at the beginning of its lifetime.Vacuum insulation panels (VIP) have a service life of approximately 50 years, whereas traditional insulation has a service life of approximately 100 years.

I ett försök av mig att ge spelmediet samma sorts behandling som många andra medier före det har jag valt ut fyra spel inom två olika genrer för en analys av deras handling, karaktärer, estetik och gameplay. Handlingen summeras enligt reglerna för narrativt berättande och en semiotisk infallsvinkel används sedan för att leta efter saker, tecken, som är värda att tas upp för analys i alla fyra kategorierna. Vissa jämförelser görs mellan spelen, främst inom kategorierna estetik och gameplay, först inom samma genre och sedan genrerna emellan för hitta likheter och skillnader i sättet spelutvecklarna har valt att utmana spelaren och göra spelen roliga att spela och hur de har valt att förmedla spelens handling. De utvalda spelen är Capcoms Devil May Cry 3: Dante?s Awakening, Sony Computer Entertainment Americas God of War, Konamis Metal Gear Solid 2: Sons of Liberty och Ubisofts Splinter Cell: Chaos Theory.

With a growing population on earth the amount of end-of-life vehicles (ELVs) and other scrap steel increases. The European Directive 2000/53/CE? requires a minimum of 95 % reuse and recovery and 85 % re-use and recycling no later than 1 January 2015, for end-of life vehicles. This imposes a need for more efficient recycling and recovery. Despite this shredder residue (SR) is commonly land filled.This report investigated the magnetic fines residue generated at Stena Metall shredder facility in Halmstad, Sweden.

The purpose of this master thesis is to show how a chosen actor in form of the Swedish union organization IF Metall (the Swedish union for metal- and industrial workers) works with pro-reading activities. The project being scrutinized is the Read to me dad-project which aims at fathers who are not used to reading activities within the LO-group (the Swedish Trade Union Confederation). The methods used are interviews and literary studies. The theoretical background of my discussion is based on three education ideals. The neo-humanist ideal emphasizes the personal improvement through literature.

Transdermal drug delivery, besides painfulinjections with syringes, has long been associatedwith small size particle pharmaceuticals, which candiffuse through the skin. This method of drugadministration has only been applicable on a smallnumber of drugs, where active molecules are smalland delivery time should or can be long.Other drug delivery options are oral administrationand injection with hypodermic needles (ordinaryhospital syringes). In oral administration thestomach and liver tend to dissolve the drug and theeffect becomes more difficult to anticipate, anddrug delivery rates difficult to control. Hypodermicneedles are used as a mean of drug injectiondirectly into the bloodstream. This method ispainful and risks infection due to tissue damageand skin penetration.One way to get a painless non-damaging techniquewith high delivery rate that still can delivery largemolecules is to manufacture an array of microscopichollow needles and equip them with a pumping unitthat delivers the correct amount of drugs.This thesis shows the technique and possibility ofmanufacture micromachined needles using low costtechniques of Ion Track Technology (radiation ofheavy ions creates porous materials), electrolessdeposition (non-current activated wet chemistrymethod of depositing metal) and electroplating.

I have together with Frimeko AB developed new hallway furniture for preschools. The background to the project is the fact that all the existing hallway furniture?s on the market today have a similar design and same features. None of the furniture stands out immediately. Companies who work with school furniture in general have been inspired by each other, and therefore is the collections monotonous.

This thesis work includes studies and simulation how magnetization of the translator in a linear generator for wave power can be automated. The translator is the moving component in the generator that is "dressed" with permanent magnets. The translator is magnetized with rectangle-shaped permanent magnets that are today's strongest permanent magnet type of neodymium-iron-boron (NdFeB).Eight equivalent metal sheets are mounted around the translator. The plates have milled tracks where 106 permanent magnets per sheet are mounted. Today the assembling of the magnets is done by hand, which is a very tedious and time-consuming work.  This project presents investigations about the automation of the translator magnetization theoretically and simulation results are preformed in ABB's robot simulation software RobotStudio. Even robot-held tool was designed that enables the robot to be able to magnetize the translator in a simple manner.  The investment cost is roughly 1.5 million SEK. With an economic life-time of five years, the investment costs are estimated to 24000 SEK / month.  According to the calculations, this project is very motivated to implement, as it provides savings up to 17 000 SEK per translator which is 10.2 million SEK assuming that the robot cell is operating at full speed the whole year.According to this thesis work the result is a 4x9 meter cell with two industrial robots of the type ABB IRB6650S.The cycle time to magnetize one translator was calculated to about 10 hours.This prototype of project can possibly be implemented in a full-scale production line and performed according to the calculations and simulations presented in the report. Further work is suggested to improve the tool.Lyssna .

The thesis was performed at the lighting company Zpecta AB. Zpecta needed to develop alternative attachment of their LED-luminaire Capella. Today Capella attaches in metal ceilings with four magnets. Zpecta got indications from their customers that there was a need for other attachments. The purpose is to determine the customer?s requirements and the interfaces that are considered for Capella.During the thesis, Capella was only on the market for testing and evaluation.The thesis was initiated to create a specification.