This examination work is the final work in our education to become a Bachelor of Science inMechanical Engineering by the University of Lund.The main purpose with this work has been to develop a new effective material handling system for TPPM AB in Lund since the existing system starts to become out of date. The future system that is going to be installed shall have the capacity to support all machines with unit-, semi- and finished goods during full production. The work has also included studying the possibilities to change the material flow in a positive way between the storage and the production when one is using existing buildings.During our work we have been used a simulation program called AutoMod, performing company visits, interviews and reviewed internal and external information to create a picture of what the best conclusion can be. During the work we have contacted five suppliers to receive system solutions and quotatioris. The suppliers, which have been contacted, are Swisslog, Moving, Rocia, Christensen & Hansen and ABB.

Interest in alternative energies is high in Sweden today, particularly in the agricultural sector. According to the Swedish lantbruksbarometern (2009), almost all respondents consider the use of some form of alternative energy from the farm. While interest in alternative energies is large, attention to the alternative energy straw has fallen and is almost nowhere mentioned in the literature today. Three years ago, in the Lantbruksbarometern nearly 44% of the farmers would be willing to invest in straw as heating system on the farm. How do the farmers decide to invest in alternative energies? With this information a problem is presented for this paper.

Heat stress negatively influences the performance of dairy cattle such as lactation and reproduction. Heat stress can cause production losses as well as welfare problems. Years of research have shown that heat stress is a huge problem for dairy cattle in both the tropics and temperate zones but no such research have so far been done in northern European countries. It seems like shade is an important tool when improving pasture conditions and therefore deserves more attention. The aim with this study was to investigate whether there is a need of providing shade for grazing dairy cows during the summer in Sweden. Two groups of lactating Swedish Red dairy cows (n=15 per group) were kept on pasture.

The Swedish building and property management sector are responsible for about 30 % of the total energy use. In order to take environmental consideration, different environmental assessment tools and standards are used. Miljo?byggnad, Svanen, FEBY12 and PHI are some of these. There has been increased interest to certify buildings and therefore it is of interest to evaluate the assessment of the energy field to see if relevant energy aspects are assessed.

The sun is an endless energy source and the heat it produces can be used to heatup our homes. This technology is relatively old and was introduced in the late70-s. There are two kinds of solar collectors that are most frequently used todayand these are plain solar collectors and vacuum solar collectors. The plain solarcollectors are the once that are used the most but the vacuum solar collectorshave increased more as a percentage the last couple of years.The biggest question asked regarding an investment in solar heating is if theplant is economically profitable. This question has no direct answer because itis dependent on a couple of prerequisites.

This report describes the development of a system for controlling documents. The report starts with a problem description which the company wants an intranet-based solution for. The report then continues to describe the development phase for the different parts of the system which results in a complete system. The company that wanted this system is called Orbit One and is located in Ronneby, Sweden. They have had a problem with old documents circulating in different versions and in different binders.

The purpose of this thesis for Sapa Heat Transfer is to examine a furnace in which aluminium is pre-heated before hot rolling. The project is modeled in a computer environment in which the air flow in the furnace and the heat transfer to the aluminium solids are included. The computer environment and its governing equations, as well as boundary conditions and generalizations, are presented and explained.The simulations are based on two models. The first model has an asymmetric solid placement, which is how it looks in today's ovens. It is validated against collected data.

This paper goes through solar energy and what uses it has. It is also a guide in the choice of solar collectors forthe real estate that I have drawn for the thesis work.Solar energy is a renewable source of energy from the Sun's light. Energy can be used to produce both heat andelectricity through solar collectors and solar cells. Some of the benefits of solar energy is that it is completely freeto extract, environmentally friendly and virtually maintenance-free. Disadvantages are that the technology isexpensive, does not cover the entire energy needs and takes a long time until it pays.

När man lever i ett samhälle där användandet av mobila enheter som smartphones ökar, sker motsvarande ökning av frågan på tillgång till befintliga system i mobila enheter. Ett mobilt system kan utvecklas på olika sätt beroende på efterfrågan och kunskapsbasen hos utvecklarna. Det finns olika sorters mobila system, däribland webbaserade och plattformsspecifika system.Den här rapporten innehåller en förstudie för olika tillvägagångssätt för att skapa en mobil version av ett system. Rapporten redogör för olika tekniker som kan användas beroende på vilket system som önskas överföras, samt vilken målgruppen är. Rapporten beskriver också hur framtagandet av ett mobilt system för olika mobila plattformar har skett för ett redan befintligt system..

Storage of biomass is often associated with problems such as heat development, dry matter losses and reduction of fuel quality. The rise in temperature can potentially cause a risk of self-ignition in the fuel storage. Moreover, emissions from storage piles can cause health problems in the surrounding. The dry matter losses and reduction of fuel quality can have economical effects. The aim of this thesis project is to develop guidelines on how to store large amount of biomass at Vattenfalls heat and power plants in an optimal way.

This thesis examines if commercial-of-the-shelf (COTS) systems meet the needs in different types of organizations. This was investigated through a case study of a COTS system. The system is built for contact centers and used in different types of organizations. Contextual inquiries with users from six different organizations were held together with interviews with stakeholders of the system. This gave an understanding for how the system is used and the needs to be met in the different organizations were recognized.

This thesis calculates and compares the values of improved environmental quality due to future possible investment alternatives in biogas production facilities at Käppalaförbundets Reningsverk (Käppala Sewage Treatment Works) in an attempt to determine which alternative yields the highest such value. Käppala faces three investment alternatives for the usage of biogas. The alternatives are production of vehicle fuel, district heating and thirdly, heat and power production. Estimates of the value of environmental change are calculated for each of the three investment alternatives, and these estimates are then compared. The environmental change in question is the change in discharge levels of carbon dioxide (CO2), nitrogen oxides (NOx), sulphur dioxide (SO2) and particle matter.

Akademiska hus is a real estate company that specializes in providing Swedish universities with housing facilities for educational and research purposes. The company strives to reduce its use of energy by 40% between the years 2000 and 2025. The aim of this thesis is to determine which measures can be taken to reduce the need of purchased energy in a building that is used by theSwedishUniversityof Agricultural Sciences inUppsala.In order to determine the results of various changes to the building envelope and ventilation system, the building was modelled in the computer simulation program VIP-Energy. Other proposed changes to make the use of energy more efficient concerned water use and lighting. The need of purchased energy can also be reduced by producing electricity or heat on site, using solar energy.Results show that economically viable measures include upgrading windows and faucets, adjusting control systems for ventilation and lighting, and installing roof mounted solar panels for power production.

As part of an internship at Ericsson, this report was written to enhance the understanding of how it is to develop a system that is well established at the workplace. To improve an already existing system is not always as easy as many developers may think. In this report the pros and cons of developing an already existing system has been researched and analyzed. Do note that the results are only from one development of a specific system and that comparison of other developments has been made from other reports and not from experiencing it firsthand. It was found that the choices made can have an impact on further developing and it is important to write down what has been done.

In 2010, Airwatergreen AB started testing their new technology, the Airwaterwell, an atmospherical water generator of their own design that is running on solar heat, with a production capacity of three litres of water per day and m2. The purpose was to focus on foreign aid organizations as main purchasers for project investments towards rural communities in developing countries that suffer from lack of, or compromised quality of drinking water. In order to further understand if this technology would bring a positive impact in the developing countries, the company contacted the Swedish University of Agriculture for a socio-economic study of the Airwaterwells? potential. The authors elected Cost benefit analysis as the appropriate method for conducting the study and India became the study region because of its many problems with water related issues such as diseases as well as insufficient water supply for households. The regions that this study is based on are Gujarat, Haryana and Uttar Pradesh given their differences in income, health situation and poverty rate.