The project was based on a request to improve an already existing program and hardware at the electrical engineering department at the royal institute of technology. For maximum ease of use, tests have been done on students to properly design the program for what it is meant to be used for. These tests have been transcribed and analysed, then brought back to the group in a discussion and then transcribed and analysed again, I call this process the ?four step process? (this process is presented and explained in chapter 6.4.). A part of this master thesis was also to analyse the four step process to enhance validity of this research.The project resulted in a new program with a new graphical view and features to help students and researchers to work with the technical tool for electromagnetic readings of planar objects.

The examination has been performed at Bjerking AB, which is an architectural and engineering company. Bjerking AB has the ambition to be a member of Green Building.The Green Building program developed in year 2005 by The European Commission, the program is an environmental system with the aim to improving energy efficiency within the sectors of non-residential buildings. The minimum requirements to participate the program are following: in new-built buildings the calculated energy consumption must be 25 % lower than the requirements in the BBR (Building regulations) and in refurbishment the reduction must be 25 % lower than before the optimization.The aim of this study has been to examine and review the company Bjerking AB's energy efficiency work in the project of building the school/kindergarten S:ta Maria Alsike, where the goal is to get this building Green Building classed. A description of requirements to become a member of the Green Building has also accomplished in the thesis.The methods performed in this study are literature review, searches on the Internet, studies on the project database for facts/values, calculation of energy consumption and interviews of members of the Green Building. The following issues have been dealt with in the report;-          Did the building in the project manage the requirement to achieve an   energy consumption that is 25% lower than the requirements in BBR?-          What technical measures/system was selected in the building?-          What kind of cooperation was the project based on?-          What is required for consultancy companies and real estate owners to become members of the Green Building?The study of the project and calculation of estimated energy consumption in the building, give the result 47 kWh/m2, year.

This report describes the procedure in which we accomplished our task, which was to implement a present algorithm. This was made using C++. The algorithm is developed by Sasan Gooran, who is our examiner in this project. The algorithm uses an iterative method to produce the halftoned images. The reason for this project is to speed up the existing program which is made in Matlab.

The task was to deliver a solution that could be implemented in today?s production of the FH truck. To make the project successful it was most important that the end result had a high maturity level. For that reason an analysis of ergonomic, laws and regulations, and possible materials where conducted. To show that this project is profitable and can be realized a ruff cost estimated of material and tools is added to the research.

This report contains a study of replacing nuclear power with biofuel. The nuclear plant, OKG north of Oskarshamn in Sweden has been chosen and an extensive literature study about the nuclear plant has been implemented. The main aspect of this report is the availability of biofuels and whether it would be economically sustainable. Sweden?s most common biofuels are examined with regard to scope of use and potential.

This bachelor thesis portray a project where the main task were to develop a computer based system prototype for handling of absence report at the upper secondary school af Chapman in Karlskrona. The project has been conducted in cooperation with students from the university programs software engineering and information economy at Blekinge Institute of Technology. Our task as MDA-students have been to survey the process of absence report of today through field studies and give a proposal of a graphical user interface which later were developed by the software engineers. The thesis also handles the cooperation with other students from other university programs..

Syfte: Projektet, som vi studerat, har genomförts i en bransch, där uppfattningen råder att osäkerheten i omgivningen är stor och att risker ses som ett frekvent inslag. Syftet med denna studie är att utforska huruvida ett projekt under dessa premisser tvingar fram ett systematiskt användande av Project Risk Management eller om man använder sig av en annorlunda strategi för att hantera risk- och osäkerheter. Vår avsikt är även att se till de orsaker som ligger bakom handlandet och hur projektgruppens arbetssätt har fungerat. Metod: Vi har utgått från det hermeneutiska synsättet, där vi genom kvalitativa intervjuer tagit del av ett promotionprojekt vid en artistlansering. Promotionprojektet avser ett debutband på ett independentskivbolag.

A Road project?s frame is built up of a decision- and consultation process, where the results of the preparatory studies are being discussed. The aim with a consultation process is that all theopinions and knowledge from the operators' will be taken into count in the basis of information, that is needed in order to the different involved operators' to take a decision.The aim of the essay was to investigate how the decision- and consultation process for a road project, the E4 section between Uppsala Läby, turned out. The aim is also to bring up how theprocess could have been done more correctly. The study was carried out through a qualitative method with an analysis of materials from the National Road Administration's archives, the associated Environmental Impact Assessment (EIA) and through interviews of the different operators.My theoretical basis has been a Stakeholder Analysis and its principles, and theory about different executions of social planning.The result showed that the decision- and consultation process has been bursting in democracy and consideration taking of the different operators' opinions, has been poor from the developer?s, in this case the National Road Administration's, side.

This master thesis has been carried out as a prototype development project. The project hasbeen performed in cooperation with ÅF Combra AB. The purpose with the master thesis is toconstruct a Bluetooth interface between an accelerometer and a smartphone and constructinga physical prototype containing an accelerometer. This is done to test a new user interface tomobile phones. The master thesis has also included a research about the possibility toimplement distance measuring with Bluetooth.

This report is a bachelor thesis work within the field of Product Development and is also an assignment for Thule Sweden. The work has been performed by Niclas Tjäderborn and Christian Holm, students at the Mechanical Engineering Program with major in Product Development and Industrial Design at Jönköping School of Engineering during spring the semester of 2009.The thesis work concerned the development of a new wheel holder for bike carrier for Thule Sweden. The background to the project was that the initiator wanted a more user friendly wheel holder with better design than those available on the market. The wheel holder is able to be implemented on one or several of Thule?s current wheel holders.

Lansen Technology develops and sells alarm systems. The communication between the system devices are wireless. The radio protocol used by the system is developed by Lansen with the purpose to be energy efficient. The alarm systems target groups are individuals, businesses and government agencies. The current system is installed, configured and controlled from a control panel for all audiences.

Due to the obvious fact that one can never be hundred percent sure of what's hiddenunder the ground surface, construction work is naturally hard to project.However, many of the work methods are executed in the same way on variousprojects. The department of construction work at JM AB region öst describes a lackof follow-ups and feedback between the calculators and production managers.In this thesis we have studied the communication between these groups and alsohow they share experiences and knowledge. In order to get the full pictureof the day-to-day operations we used three methods to gather information. Studyingliterature gave basic knowledge of theories about feedback, and thenecessity of working with giving feedback. In order to understand the process ofconstruction work we made several interviews, both structured and nstructured.

The aim of this project has been to raise the production efficiency of Daliff Precision Engineering through reduced transportation time and a more standardized manufacturing process. The problem has upraised because of a big and diversified product flora without any standard products and with just small batches ordered. The report also tries to show the work procedure with general analytical methods and be an example of how a similar problem can be resolved. The transportation time is being proposed to be reduced through a change in the layout of the factory. By moving a few manual machines, dispatch and burring to more efficient locations, the total transportation time will be reduced by 55 %.

This research is conducted on one of the world?s largest deposits - Shtokman gas and condensate field located in the Barents Sea. The development of the field is operated by the Special Purpose Company Shtokman Development AG - the international consortium of Total, Statoil and Gazprom. This research is aimed to analyze the value chain of the Shtokman project and to study the socio-economic capacity of the Murmansk region in order to examine the perspective fields of work for local companies, as well as the socio-economic potential of the region related to the gas industry that can be applied to the realization of the Shtokman project. The research is based on qualitative and quantitative data collection that involves the results of 24 semi structured interviews conducted in the Murmansk region, including the interviews with representatives of the Shtokman Development AG and the industrial committee of the Murmansk region government.

This final-year project has been performed at Strix production Efterlyst. The task has been to make a page under their homepage, with a game application that?s supposed to be interesting and also have a strong connection to the TV- program. In the first part of the report, the reader will learn about the preparing work that was done before the work with the final game began. It is in these two test versions all the technical problems were tested, to finally be used or thrown away.