Forest streams and the associated riparian zones are sensitive to disturbances and changes that occur within these riparian areas. Particularly sensitive are small streams of low order, which will have large impacts down-stream. The disturbances that occur in the riparian zones are reflected quickly in the stream. Driving with forestry machines in the riparian zone will have detrimental effects to the soil and water. Driving the machines will lead to changes in the mineral soil composition, resulting in the reduction of porosity, less infiltration, compaction, and an increased bulk density.

This report has a dual focus. The first goal was to increase the knowledge of how the use of electricity in a residential building is distributed. Electricity in residential buildings is used for lighting in common areas, elevators, pumps and many other appliances. The electricity used for these different parts is to a great extent unknown. A few studies have been carried out and the result of these is referred to in this report.By means of measurements and approximations the use of electricity for various appliances became known.

This report has a dual focus. The first goal was to increase the knowledge of how the use of electricity in a residential building is distributed. Electricity in residential buildings is used for lighting in common areas, elevators, pumps and many other appliances. The electricity used for these different parts is to a great extent unknown. A few studies have been carried out and the result of these is referred to in this report.By means of measurements and approximations the use of electricity for various appliances became known.

The point of interest in this study is to identify whether ethnicity is a correlating factor regarding Hungarian immigrants? development of identity in Sweden. The general aim is to increase knowledge and understanding of the conditions for the Hungarian ethnical group in Sweden to reach self-realization. The main question is whether the general view of the background of this ethnical group has a connection to their self-realization in Sweden? Since the study involves a whole group of minority, a limitation has been made to adults living in the city of Halmstad, Sweden.

A dilemma often met by entrepreneurs is whether or not to share information about their business ideas in order to increase the probability for success. The reason for sharing information is presumed to be an increased ability to develop the business idea, whereas the reason for maintaining secrecy would be to protect the idea from being stolen. Common as this dilemma is in practice, it is not very well covered in the entrepreneurial theories. The purpose of this thesis is to elaborate the theories in this subject by investigating an entrepreneurial case. The case shows that one possible solution to the dilemma is a situation-based information sharing.

In this degree project I write about how the farmers who grows carrots in Sweden get influenced by different rules, investments and demands. The Swedish agriculture are heading towards a harder time, and then you have to find new things to do. Now its hardly no profit to grow grain so you have find other crops. This paper is not a comparison between the contract cultivation to Findus and the cultivation where the farmer maked his products by a own company on the farm. If you have a small processing company on the farm, you have to increase the standard with different certificate. The farmer binds a lot of capital in machines, both field and in the process.

The use of bio energy in Sweden has increased during the last few years and with every passing year, bio energy produces 3-4 TWh´s more energy than the previous year. The increase in the use of bio energy makes it an interesting prospect for forest companies to produce bio energy from the forest. Sveaskog has a fairly extensive bio energy programme, mainly in southern and middle Sweden. Their activity regarding bio energy in northern Sweden has been very restrictive or even non-existent. Because of this, during the winter of 2003-2004, Sveaskog initiated a number of degree projects with the purpose of looking at the use of bio energy in northern Sweden.

This bachelor thesis is titled Who is an extremist?  - A qualitative content analysis of the agglutination of right- and left-wing groups and is written by Måns Hoffsten within the discipline of political science. This essay aims to illuminate in which way the Swedish government has tackled extreme forms of left-wing and right-wing activism during the period 1980 ? 2013. By looking at how governmental policy-suggestions and reports concerning extremism are formulated during this period this essay explores when and how the two groups first started to become a part of the same problem-representation and on what premises this is built.

Large volumes of excavated soil and rock are generated in building- and construction projects. These materials need to be transported longer and longer distances due to the densifications of cities. The transportation affects the environment in terms of noise and emissions, but also makes high demands on road infrastructure. To reduce the transport distances an increased responsibility for the excavated rock generated needs to be taken. Responsibility can be increased through an introduction of means of control.

Problem formulation: The awareness and importance of Corporate Social Responsibility (CSR) is growing within both corporations and society at large. The corporate progress in sustainable development can be both profitable and essential for the potential to compete globally. The value of sustainability reporting may differ between industries and companies of different sizes. The demands for sustainability reports are expected to increase. By 2010, no previous survey on sustainability reporting practices had been conducted within Swedish corporations. Purpose: The aim of the current study was to examine sustainability reports within Swedish corporations during 2010 and to compare the findings with preceding surveys to determine differences over time and between corporations.

Modern sawmills are using the raw-material and the production-capacity more efficiently today, due to rising raw-material prices and higher production costs. Log sweepness has a negative effect on the sawn yield, for sawmills with straight-sawing. It is desirable that these logs could be sorted based on more criteria, if it increases value-yield and consequently the utilization of raw-material. Bow-heights over 1 cm have a negative effect on sawn yield, since the surface of the mantle cuts down in the sawn pattern. Some of these small bow-heights reduce the logs yield of value which affects the production planning negatively. Nearly half of all the Swedish logs have a bow-height over 1 cm.

In early January 2010 the authors participated in a meeting with the chief engineer for a company in which a central part is manufacturing of printed circuit boards (PCB). At this meeting it emerged that the machinery and production methods have changed substantially since the early 1990's. The spreadsheet for preliminary production time calculations by the company is today based on conditions from almost 20 years ago. The company has over the years been trying to adjust the spreadsheet template. The result of these adjustments has filled it with historical residue, something which makes the template difficult and time consuming when the primary user tries to handle it.The purpose of this study was to help the company increase its accuracy in the representation of the production times for the different PCB-based products by developing a new costing model based on an already existing but inadequate spreadsheet template. The company also expressed the wish that the new costing model would be less time consuming to work with.The methods used to achieve the goal are interviewing, participatory observations and meetings with relevant persons. The data obtained were analyzed using the theory on PCB production and visualization of data.

This report has a dual focus. The first goal was to increase the knowledge of how the use of electricity in a residential building is distributed. Electricity in residential buildings is used for lighting in common areas, elevators, pumps and many other appliances. The electricity used for these different parts is to a great extent unknown. A few studies have been carried out and the result of these is referred to in this report.By means of measurements and approximations the use of electricity for various appliances became known.

What if the emergency response directly knew exactly where to go and what to do if a road accident occured? During the last ten years the number of motorcyclists in Sweden has doubled. Every year, more than 300 riders are seriously injured and over 40 die in road accidents. Being found in time is critical to increase the chance of survival. The goal of this project is to use design methods to find a solution that enables a fast and adequate emergency response for motorcyclists and other unprotected road users..

This Thesis in Military Technology deals with experiences drawn from the forced introduction of Weapons Station 01, 2009. The work aims to identify the experiences regarding the forced procurement of military equipment to see how they can develop normal and fast procurement of equipment. The main conclusions of  this work, is to achieve greater capability and increase the military utility, are: -          Common objectives and priorities of stakeholders-          Response and joint types shall determine requirements for system-          Ensure an integrated project team also at lower levels-          Engage the integrated logistic support early in the materiel process-          Include Armed Forces staff as early as possible in the testing and validation-          Prioritize work to facilitate the rapid development of decision on use (BOA)-          Provide back up for increased redundancy in the mission area .