I föreliggande studie undersöks hur användare upplever användbarheten i ett säkerhetskritiskt system ? Luftfartsverkets flygledningssystem SIGMA. Utifrån litteraturstudier definieras begreppen användbarhet och säkerhetskritiska system. Empirin utgörs av intervjuer med användare av SIGMA-systemet. Studien visade att användarna upplever att systemet i väsentliga delar har bra användbarhet, vilket utifrån litteraturstudier, intervjuer och efterföljande analys främst tycks bero på att systemet arbetats fram med stor användarmedverkan och att det var utarbetat specifikt för arbetsplatsen.

This master thesis work was done at Saab Underwater Systems AB, a company at the cutting edge of underwater technology. Here torpedoes and other underwater vehicles are developed and manufactured. The major customers are navies of different countries, mostly the Swedish navy. The aim of this master thesis is to develop, construct and evaluate an automatic Trim System for Unmanned Underwater Vehicles. The task of the system is to change the position of the centre of mass and the vehicle?s total mass or volume.

During the 19-century a global warming has been observed, which includes increases in global air and ocean temperatures, widespread melting of ice and snow, and rising global sea level. There is a clear connection between emissions of greenhouse gases caused by the human and the increase in temperature. Climatic changes caused by global warming can be stopped trough decreased emission of fossil fuels, for example by an increased use of biogas. Biogas is a renewable energy source which is produced through anaerobic (oxygen free) digestion of organic material. The gas is a mixture of methane (CH4) and carbon dioxide (CO2) and can be among others used as fuel in vehicles.

Ett förslag på design av gränssnittet på förstasidan av ett intranet är utformat med tanke på användbarhet med utgångspunkt från attityder och motivation.Arbetet är utfört hos Familjen Dafgård AB i Källby, ett företag inom livsmedelsbranschen.Två gränssnitt är designade, ett efter minimalistiska principer med ett fåtal rubriker innehållande både global och lokal information i en djupare struktur för att stimulera till en action-oriented approach och att locka till sig nya, ovana användare. Det andra med utgångspunkt från informativa startsidor eller en maximalistisk design med rubriker i flera nivåer för global information samt ikoner för lokal information.Gränssnitten är utvärderade med tanke på användbarhet med hjälp av REAL metoden, Relevans, Effektivitet, Attityd och Lärbarhet. Som komplement till denna metod som utvärderar på detaljnivå används en definition kallad användbarhet i kontext. Denna hanterar användarvänlighet, användarkompetens, användaracceptans och informa-tionsbehov på en mer global nivå.Utvärderingen baseras på en kvalitativ ansats med intervjuer och observationer av sex försökspersoner som har fått pröva de två versionerna av gränssnittet. Fyra ovana och två vana internetanvändare.Resultatet visar att av de två versionerna är den maximalistiska startsidan är att föredra.

Elever ska enligt kursplanerna i teknik få förståelse för de tekniska system de möter i sitt dagliga liv. Genom att eleverna får kunskap om teknik i allmänhet och tekniska system i synnerhet får de möjlighet att påverka sina liv som medborgare i en demokrati. I litteraturen saknas idag studier om elevers uppfattningar om tekniska system. Syftet med detta examensarbete är därför att studera vilka vardagsuppfattningar elever har om de tekniska system de möter i vardagen. Studien utgår från systemteori vilken ger en möjlighet att utnyttja det gemensamma mönster som kännetecknar analys av system.

The goal of this Masters thesis is to examine how people at the production department of Arkivator Falköping AB perceive the internal organisational communication transfer and exchange of information, by means of a communication audit. The objectives are also to characterise the communication climate and the respondents satisfaction with the internal organisational communication within the organisation. The results of the study are compared with the companys information policy and with previous research in organisational communication. Answers from different demographic groups within the population are compared. The communication audit was conducted using a modified and added version of a questionnaire originally compiled by the International Communications Association.

The aim of this study was to investigate how the process of implementing a quality management system for food safety was handled in four different food producing companies in Sweden. The aim was also to analyze what difficulties the companies face and the possibilities that arise when certified. Furthermore, the reason for implementation was discussed as well as the main expectations on the certificate. Implementing a quality management system is a good way of ensuring the quality and hygiene of the food production and it also increases the traceability of food products through the whole food chain. A food safety standard provides a method of preventing problems and crisis and it can also help to handle requirements from authorities, the market and others.

Computer based information systems play an important role in modern military combat vehicles. The crew needs to be able to quickly get information about both the vehicle and its outer surroundings in order to quickly make the correct decisions. In this report, we describe the development of a prototype new information system for the BvS10 vehicle, manufactured by BAE System Hägglunds AB in Örnsköldsvik.An important aspect of the system is the time it takes from the point that the information is generated by the vehicle sensors until it is presented to the user. The system must be able to ensure that it never displays information that is out of date. Thus, it is important to create a layer and component based architecture for the solution, making it possible to control, in detail, the information?s age as it moves through the system.

In some cases there are no methods to identify raw material which are included in dietary supplements such as tablets. The identification can be done with TLC. A general method description was developed using the raw material gotukola and appel cider vinegar. This includes processing to achieve higher concentration of the active ingredient if needed; evaluation of solubility agents to dissolve the active substance; evaluation of mobile and stationary phase and visualization of the stationary phase. The report also includes an evaluation of stationary plates..

Examensarbetet syftar till att konstruera operatörsgränssnittet till en UGV (eng Unmanned Ground Vehicle) för mobil rekognosering i tätbebyggt område. Operatörsgränssnittet består av både mjuk- och hårdvara. Till operatörsgränssnittet har ett grafiskt användargränssnitt utvecklats där tonvikten legat på användbarhet med funktionalitet för positionering med geografisk presentation och sensorpresentation. Förutom en presentationsenhet för sensorinteraktion och manövrering av farkost ingår en sändtagarenhet för kommunikation mellan operatör och farkost. Två uppsättningar av systemet levererades till försvarsmakten för användning vid metodförsöksstudier..

Many companies with expansion plans may eventually need to take a decision whether tomove parts of the organization abroad or not. One example is how Swedish companies? placesits production in Asia where labor is cheaper, but at the same time wants to use Swedishengineers. The communication possibilities today makes it no longer necessary to travelacross the world to have a meeting, and questions can be answered in a matter of minutes.This means that a company that is spread out over the world still can communicate betweentheir employees.When participants in a project are spread out over the world, and can?t meet in person, it iseasy for problems to appear.

When using the digital halftone proofing systems, a closer print match can be achieved compared to what earlier couldbe done with the analogue proofing systems. These proofing systems possibilities to produce accurate print match canas well lead to producing bad print matches as several print related parameters can be adjusted manually in the systemby the user. Therefore, more advanced knowledge in graphic arts technology is required by the user of the system.The prepress company Colorcraft AB wishes to control that their color proofs always have the right quality. This projectwas started with the purpose to find a quality control metod for Colorcraft´s digital halftone proofing system(Kodak Approval XP4).Using a software who supports spectral measuring combined with a spectrophotometer and a control bar, a qualitycontrol system was assembled. This system detects variations that lies out of the proofing system´s natural deviation.The prerequisite for this quality control system is that the tolerances are defined with consideration taken to the proofingsystems natural deviations.

This examination report is a part of a program for Industrial organisation and Economics with specialization in Logistics and Management at Jönköping University. The report contains an analysis of the internal material handling at Kongsberg Automotive, and also an improvement proposal for a new material handling system.The aim with the report is to find a better material handling system and also make an analyse of the existing system. The goal is to shorten the distance for the operators when they order material, and also to increase the productivity.The investigation methods for the report have for the most part consisted of observations and interviews of key-persons who daily work in the production. During some time the actual material handling-system has been observed and some shortcomings have been discovered, and these are also discussed in the report.The shortcomings that have been discovered are for once the indistinct signal that should signal need of material in the production. Some other activities have also been discovered that does not bring any value into the final products.

This qualitative study involves the implementation of Lean and Kaizen methods in a Swedish service industry. Lean philosophy is based on a method to achieve more with less. In practical terms this means that the use of an organization's resources is improved. The origin of Lean is the Toyota Production System. Now, Kaizen methods give managers and employees a better more efficient system to reach their goals within the organization or company.

Diagnosis means detection and isolation of faults. A model based diagnosis system is built on a mathematical model of the system. The difficulty when constructing the diagnosis system depends om how the model is formulated. In this report, a method is described that rewrites the model on such a form that the construction of the diagnosis algoritm is easy. The model is transformed by two state space transformations and the result will be a system on state space form where one part of the system becomes easy to supervise.