The dialysis ward at Karolinska University Hospital is a highly pressurized work environment filled with critical treatment situations where patient?s lives can be constantly in danger. Staff have to deal with a myriad of alarms and error codes in response to their patients varying ailments. The workforce at the dialysis ward lack controlled environment training, sufficient to address all of the potential treatment scenarios, with no risk of jeopardizing the patient?s condition.The purpose of this essay is to design and test the efficacy of using an IT based device for dialysis education at Karolinska University Hospital.The main topics this essay intends to address are:? Identification of user scenarios and training fields.? Prioritization of key training areas.? Utilization of IT in effective staff training.? Design of a conceptual prototype.The process focuses on the user and their needs.

Todays travel trends go towards independence and self planning. If you need advice or help when performing your trip, there are several different series of guidebooks on the market and one of these series comes from the travel magazine Vagabond. This degree project concerns the redesigning of the travelguides of Vagabond, or to be precise: their cityguide over Istanbul. The purpose of the new design is to assure the resemblance between the guidebook and the magazine, as wanted by the Art Director of Vagabond Angelica Zander.Prior to the redesigning process preliminary studies that make up the fundamental ideas were made. Three other big titles of guidebooks on the market were analyzed, and in addition a great deal of focus ? considering the final purpose ? was put on the concept of magazine design.

This report summarizes a Bachelor Degree Project in Integrated Product Development,carried out during the spring semester in 2007 by three students at the Product Design Engineering programme at the University of Skövde. The project was performed as an assignment for KinBag ab, a sister subsidiary to Kinnegrip ab in Lidköping, who develop,manufacture and market the golf bag KinBag, a bag with an integrated wheel carriage system. The purpose of the project was to redesign the golf bag to attract a target group consisting of golfers aged between 20 and 40.The layout of the project was as follows: The project began with a feasibility study where different problems were identified with the basis of a market research which eventually was summarized in a dynamic specification of requirements. The feasibility study was followed by a generation of ideas which contained everything from sketches to simple mock-ups with an intensive amount of thoughtful brainwork and information gathering in between. This ledto the development of a number of design concepts, both on an overall level and on different parts of the golf bag.

The aim of this study was to examine how two integrating social enterprises relate to and combines social, ecological and economic sustainability and how they work with sustainable development in the field of social work. The study has been focusing on three questions: What are the values underpinning ?Macken? and ?Vägen uts? approach to sustainable development? What motivates these companies to work with ecological sustainability in the creation of new jobs? How do these companies combine social, ecological and economic sustainability? To answer our questions we have been interviewing nine employees through semi-structured interviews combined with observations and this study was analysed through a symbolic perspective. The conclusion of this study showed that these companies worked with specific themes to reach social sustainability. Recurring themes in the study was empowerment, recovery and the employee?s own experience of exclusion.

Syftet med denna studie var att identifiera problem och behov som byggare i Sverige stöter på i sin vardag samt anordna en workshop där produktutveckling utifrån dessa behov diskuteras, samt hur denna information kan användas i produktutvecklingen. Studien grundar sig i teorier om innovation, behov och kvalitet, behovsidentifiering, innovationsspridning, produktlivscykel och metoden NABC: Need, Approach, Benefit, Competition. Grunden till arbetet är en föreställning att produktanvändare har behov som dem själva inte är medveten om. Genom att utgå från dessa omedvetna behov kan en bättre produkt utformas. Empatisk design (deltagande observation) användes för att kunna upptäcka outtalade behov samt skapa en god förståelse för byggarnas naturliga arbetsmiljö.

Ljudet a?r ett intressant kommunikationsmedium som utnyttjar varje individsegna erfarenheter och fo?resta?llningar da?r associationer fa?r stort utrymme. Mu-seer som idag kan va?lja fra?n ett stort urval av medier har mycket att vinna ge-nom att anva?nda sig av ljud - inte enbart fo?r att tekniken tilla?ter det.Den ha?r uppsatsen har fo?r avsikt att underso?ka ljudets mo?jligheter som kom-munikationsmedium i utsta?llningar. Syftet a?r att sprida ljus o?ver detta fo?rha?l-landevis outforskade omra?de som jag anser har ma?nga outnyttjade mo?jligheter.Fo?r att avgra?nsa min underso?kning har jag valt att studera utsta?llningen Dro?m-mens syster som finns pa? Va?rldskulturmuseet i Go?teborg.

Today we can create digital 3D models which can be realised almost instantly through production methods such as 3D printing and computer controlled milling.What if this same technology could be applied to the development and construction of terrain parks?With snow as the material tools could be developed using similar principles to design and sculpt the surface, only on a larger scale.How would terrain park designers adapt their process to use this new technology? In this Industrial design thesis I explore how the ideas of the terrain park designer can be expressed through such a system with focus on the designers knowledge and skill without the need to learn complicated 3D programs.Sketch, create, ride. .

Technical products are becoming more and more complex, this means that the drivers, mechanics and service personnel?s need for assistance such as the service literature is increasing. In this degree project the focus is on the technical manuals of Scania?s Workshop Manual. Today, the information in the Workshop Manual consists of collaboration between text and illustrations.

Websites today only offer simpler form of technical analysis and are not fun to use, therefore student decided to build a website that makes technical analysis a bit more fun by giving user possibility to experiment with settings for technical indicators and also see clear visible results from analysis. Student decided to build website in ASP.NET. Technical indicators for this project only consist of those who give buy and sell-signals via cross-over, no divergence or pattern finding.This project has three questions that define this project. It?s important that there is good functionality so that performing an analysis is perceived as simple, one question is therefore; what functionality for website is needed in order for analysis to be perceived as more simple?Technical analysis is a pretty complex subject and demands an interface that is perceived as easy to understand and easy to use, it?s therefore important that the interface is well designed, second question is therefore; how should the interface be designed to be user-friendly?When systems grow large they often become hard to develop and later on unmaintainable because of the accumulated complexity and dependency between classes, the code is a mess, the last question is therefore; how can the systems complexity be eased with object-oriented design principles?Jakob Nielsens ten heuristics for User Interface Design were used as inspiration for designing the interface for the website.

Jag har i mitt examensarbete jobbat med framtagningen av en vattenflaska för en hållbar utveckling. En vattenflaska där användningsområdet är för vardagligt bruk. Arbetet har en inriktning mot estetik och hållbarutveckling. Jag har tittat på vilken miljöinverkan buteljerat vatten har, undersökt estetik som begrepp och gjort research. Detta är sedan följt av en designprocess innehållande skissprocessen, användarstudie, och designmetoder vilket leder fram till en prototyp av en produkt.

This report describes how a syringe pumpwas developed for Q-linea AB inUppsala Science Park as a bachelor´sthesis at Uppsala University. Thepurpose of the syringe pump is toreplace existing pumps in one of Qlineasdosage instruments. The reasons for whythe pumps are replaced are that they arebig and heavy. Therefore the task was todesign a smaller and lighter syringepump.The goal of the project was to create aprototype of the design that met themechanical requirements posed. Therequirements were met.In the report the work process can befollowed from the development of thespecifications to the final design andtests of the prototype.

This report aims to describing the work behind the development of a masonry heater.The masonry heater is developed in collaboration with the company Transient Design KB that is a product development company located in Alingsås. The company sees a possibility to cover a market segment where modern technology and design are missing.The report presents those methods and approaches that have been used and gives an overview to how the project has been carried out. It describes how the ideas behind the final results have produced and how they have been developed during the project's time. In the report you can also read about the final concept with its choices of construction and materials.The report is completed with a presentation of a final concept and a ground for possible future production..

TitleThe communicative office ? A study of the effects that Activity based offices has on internal communication.      Authors                             Carl Varli, Jonas Eklund and Petter Göransson Course                              Business administration III ? Organization ? Bachelor? thesis Tutor                                 Olle Duhlin           Examiner                          Mikael Lundgren Background                      The prime focus of activity based office designs are the though of choosing your workplace along with your work task, instead of the other way around. This means that you do not longer have a set workstation of your own, you move around according to where to your current work will be best performed.  Problem                           We want to explore how the communication within a company?s departments has been affected by the introduction of an activity-based office design.Purpose                             The purpose of this study was to get an understanding of how this office design could effect the communication within companies that uses it. Further more, we wanted to study the effects that this kind of office would have on the communication within a department.

Skillingaryds stålrörsindustri AB handles different kinds of steel pipes and got theirmarket mainly in the furniture industry and in department stores. At the momentthe company find themselves in a strong up going course. In a few years thecompany?s turnover has increased with over 10 million SEK. This has led to ademand for structure changes and reorganizing through the company.

Eslöv received its city privileges in the year 1911 and to celebrate the city?s 100th jubilee it has been decided, among many other things, to reinvigorate the City park. This master thesis presents a new proposal for the design of the City park. As a basis for the new proposal a study of the public park is made in a social and structural context as well as a study of the history of the Eslöv City park. The history of the Eslöv City park is somewhat unclear, especially if there has ever been a one design for the whole park? To create a picture of the public park in general, a study of literature has been made and to describe the history of the City park I Have researched the city archive in Eslöv.