Background: The interest in shares has increased over the years, despite several stock market crashes. One reason for this is the emergence of stock trading online,which makes it easier for individuals to trade in shares. However, there has been much criticism towards financial analyst with the lack of fundamental basis to support their recommendations.Objective: The purpose of this study is to examine the share valuation models swedish financial analysts today applies and consider appropriate. A comparison will also be carried out in previous studies, to see if the application of the modelsand their suitability has changed.Method: The study used a qualitative approach with deductive approach. Semistructured interviews were conducted and the basis for the study's primary data.The theories and previous studies obtained through secondary data.Results: Our results demonstrate that no single model applied, is appropriate.

One of ABB Power Systems´s business areas is HVDC (High Voltage Direct Current) technology. HVDC is used for transmissions for both short and long distances. One of Power Systems?s products is called HVDC Light. HVDC Light is a relatively new technology for power transmission, but have before only been used for motor drives applications.

In healthy dogs, heart rate fluctuates during the day. Heart rate variability (HRV) reflects the autonomic nervous system´s regulation of the cardiovascular unit. Heart rate variability shows the balance between the sympathetic and parasympathetic nervous system, also called sympathovagal balance. Heart rate variability can be measured by time domain - and frequency domain analysis. In a time domain analysis you study the beat-to-beat-interval (RR-interval) in an electrocardiogram (ECG), while a frequency domain analysis can be used to determine the size of the variability.

Radio frequency identification (RFID) is a versatile wireless technology usedworldwide. The fields of applications are many and its popularity constantlygrows due to smaller in size, better and less expensive components. RFID isused to identify, track or share information about an object using radio waves.This master thesis describes the process of designing and implementing ahandheld UHF RFID reader. The goal was to, based on a UHF RFID-chipdesign a fully functional, small in size and power efficient device. Amicrocontroller provides the user interface and is also used to control theRFID-chip and a Bluetooth device.

The aim with this thesis came out of a strong interest for Passage Retrieval. Our intention has not been to evaluate an IR-system. Instead our goal has been to analyze the result of indexing documents and their passages. We have been studying the weights of the different terms in the different indices, in comparison with other parameters like frequency, normalized frequency and the inversed document frequency. Further more we have been looking at how the weights are spread using for instance the standard deviation.

This study aims to evaluate the value relevance of Piotroski?s (2000) nine fundamental signals. In order to do this, the signals are tested on the OMX Nordic Exchange Stockholm between the years 2003 and 2009. The hypotheses of the study are whether the signals are value relevant and if the value relevance has changed. To test this, a Chi-square test and a regression are used.

In Swedish sheep industry it is desired to have lambs slaughtered evenly distributed over the year. Swedish sheep are generally seasonal breeders with lambs born in the spring and slaughtered in the autumn. Some of the breeds, e.g. Swedish Finewool and Roslag sheep breeds have shown ability to lamb out of season. For increased knowledge on the possibilities to breed for out-of-season lambing in Swedish sheep breeds, the aim of this master thesis is to study the variation in frequency of two alleles in the MTNR1A gene in the three breeds; Gotland, Swedish Finewool, and Roslag sheep.

A design methodology to mitigate timing problems due to long wire delays is proposed. The timing problems are taking care of at architecture level instead of layout level in this design method so that no change is needed when the whole design goes to backend design. Hence design iterations are avoided by using this design methodology. The proposed design method is based on STARI architecture, and a novel initialization mechanism is proposed in this paper. Low frequency global clock is used to synchronize the communication and PLLs are used to provide high frequency working clocks.

Reporting harvested and forwarded volumes are important for the forest industry as it provides information of the size of the stock and facilitates logistics. Figures from Holmen Skog show low reporting frequency. The purpose of this study is to investigate the reason and find suggestions for improvement. A total of 17 machine operators were interviewed using a questionnaire combined with open questions. The results show that the majority of the machine operators find it simple to use the reporting system, although, some of them reports that it doesn?t always work as supposed to.

The acoustics in a control room is a complicated phenomenon. Early reflections, reverberation time and area in the room are some of the problems. This report is about the reflection on the mixing console in a control room. The control room being built, these reflections are difficult to take into consideration since the mixing console is one of the very last items you place in the room. This report will explain three main measurements that were done in order to get the answer to the following question: Does the mixing console interfere the frequency curve at listening position? Three measurements were done and the difference between the measurements was that the microphone and the loudspeakers were placed in different places in the control room.

Datum: 2010-06-03Kurs: Kandidatuppsats i FöretagsekonomiLärosäte: Mälardalens högskola, VästeråsInstitution: Akademin för hållbar samhälls- och teknikutvecklingTitel: Företagsvärdering med Fundamental analysFörfattare: Sebastian Järvinen och Slavisa StupicHandledare: Riitta LehtisaloExaminator: Cecilia LindhFrågeställningar: Vilka värderingsmetoder och modeller är mest lämpliga för en värdering av Eolus Vind AB?Är Eolus aktie över- eller undervärderad?Vilken påverkan har avvikelser gentemot prognos i värderingen av Eolus?Syfte: Syftet med studien är att utföra en företagsvärdering av Eolus för att fastställa om dess aktie är över- eller undervärderad samt behandla osäkerheten kring en värdering.Metod: I studien har en deduktiv metod tillämpats då vi valt att utgå från redan befintlig teori. Vidare har kvalitativa och kvantitativa metoder tillämpats för att få en djupare förståelse för hur värderingsmetoderna och modellerna används i praktiken som sedan ligger till grund för värderingen av Eolus.Slutsats: Lämpligaste metoden för en värdering av Eolus är en så kallad DCF analys, där en fundamental analys ligger till grund för de prognostiserade antaganden. Det innebär att bolaget, marknaden och dess bransch studeras för att sedan ligga till grund för de prognoser och antaganden som krävs i en DCF analys. En multipelvärdering är att föredra då den anses göra DCF analysen komplett.

Farmed mink often perform stereotypic behaviours which is considered to be a sign of reduced welfare. Previous studies have shown that enriched cages can reduce the frequency of performed stereotypies. Most studies on mink in Sweden have been done on adults. The aim of this study was to investigate if larger enriched cages with two or four mink kits reduce stereotypies in mink kits during their growth period in comparison to traditional cages. In the present study the behaviours of mink kits that were kept in four different treatments at a private mink farm were recorded. Traditional cages with two mink kits were used as a reference and the other treatments consisted of larger cages with shelves with two kits, larger cages with shelves and a plastic cylinder with two kits, and larger cages with shelves with four kits.

Bark-stripping by red deer (Cervus elaphus) cause extensive damage to economically valuable spruce trees (Picea abies) in Swedish forests. The underlying causes for bark-stripping are not fully understood, and the frequency and severity of damage unpredictably differ between regions. In this study, I investigated if landscape structure (e.g. agricultural dominated landscape opposed to forest dominated landscape), forage availability, population density and disturbance (e.g. roads and settlements) affect bark-stripping frequency.

This research analyzed differences in measurements of magnetic field strength and frequency response in five audio induction loops installed in rooms of wooden construction materials and five audio inductive loops installed in rooms of steel reinforced concrete constructions. The inductive loops were installed at floor level and the measurements were made at the listening height of 1.2m. Measurements of background noise, field strength and frequency response were made at fifteen different measurement points across the room. The research measurements showed that there are differences in field strength and frequency response between these two conditions, whether the audio induction loop is installed in a wooden construction or the audio induction loop is installed in a reinforced concrete construction. The results had a significance level of p=0,05..

This thesis investigates techniques for stealth hydroacoustic communication using spread spectrum. The Swedish naval defense organisations have a vision that all their units should be able to communicate with each other, even between underwater vehicles. But the properties of water makes it a complex channel to use for wireless communications. Radiomagnetic waves have very limited range in water, therefore acoustic waves are used. In this report the basics of wireless communication systems are described including source coding, channel coding, modulation techniques as well as different techniques for spread spectrum.