Due to an increasing global market with a growing competition and an escalating technologydevelopment the demands on companies today are increasing. To maximise the output fromtheir recourses they need to be more efficient. The research on product development and how toensure the efficiencies in the process are extensive and companies could by adapting andimplementing the result of this research use its benefits.This master thesis is made for Knightec AB with the aims that through interviews anddiscussions with three companies investigate, collate, justify and give proposals for productdevelopment process together with supporting methods and procedures for technical projectmanagement. Besides Knightec AB three other companies located in Sweden has beenparticipating in this study. Through semi structured interviews and discussions in focus groupsinformation from the three involved companies were obtained.

The worldwide industrial demand of energy, often in form of fossil fuel, is continuously growing and at the same time these resources are coming to an end (Hamamre, 2013). The interest and focus in renewable sources are then more important than ever and plants are suggested to be a good alternative for production of raw material for industrial purposes (Nilsson et al., 1998). But the world is also facing an increasing world population which also increase the nutritional needs, plants therefore need to be suitable for both industrial and nutritional purposes. To achieve this, common plants need to be improved but it also need new potential crops to be developed and introduced (Carlsson et al., 2009). Modern technology like gene engineering is an important tool to achieve these challenges (Carlsson et al., 2011). This work focused on analyzes and evaluation of different transgenic lines of field pepperweed (Lepidium campestre L.).

Min studie handlar om bemötande av psykiskt funktionshinder. Syftet med min uppsats är att beskriva och belysa hur bemötandet av människor med psykiska funktionshinder/funktionsnedsättningar kan gestalta sig. Genom min undersökning hoppas jag kunna bidra med kunskap om situationen för människor med psykiska funktionshinder i syfte att öka förståelsen i bemötandet av personer med psykiska funktionshinder. I min studie använde jag mig av kvalitativ metod för jag ansåg att det var bäst för min uppsats. Jag intervjuade tre personer, två personer som arbetar på ett boende för psykiskt funktionshinder.

Limb-sparing surgery aims to provide a functional pain free leg for the patient after removal of a local tumour in the leg. Reasons to perform limb-sparing instead of amputation can be arthrosis or hipdysplasia or other problems with the locomotor apparatus that makes the patient unsuitable for amputataion. Owner reluctance to amputate is another reason for limb-sparing. This master?s thesis is a case study of a dog with an osteosarcoma in its distal radius. The dog was treated by a limb-sparing method that uses the ipsilateral ulna as a vascularized roll-over autograft.

In an attempt to make social work evidence based, the Swedish National Board of Health and Welfare, has recommended the use of standardized methods. As there are very few instruments that are defined as standardized, we decided to compile studies made with the "Family Climate self-rating scale", FCS, that is used by the profession, although not yet validated. We were looking for conformity in results and functionality in family treatment. FCS comprises a list of 85 adjectives to reflect different aspects of the emotional atmosphere in the family. It has been used since the late 80´s and there has been no attempt to compile results of using the instrument, until now.By searching in databases and libraries we found 20 Swedish studies using the instrument, which we compared to each other.

Information about vibration injuries as a preventive measure is beneficial to society as well as the individual. As early as after a few years work with machines that vibrate can cause young sensitive persons to develop vibration injuries.An evaluation has been done on a web page with focus on information about work related vibration injuries. As a part of the evaluation a user observation and interview study was performed with workers who worked in different occupations. The workers all used machine that vibrate as part of the work. A total of eleven workers participated in the study.

Dagens olika marknader besta?r vanligtvis av ma?nga konkurrenter da?r alla konkurrerar om samma kunder vilket kra?ver mer av fo?retagen att sticka ut fra?n ma?ngden och go?ra sig mer konkurrenskraftiga. En djup relation med kunden a?r da?rfo?r av en stor betydelse som bland annat kan uppna?s genom varuma?rket.Ett varuma?rke har vissa personliga egenskaper som ger konsumenter en underlig- gande betydelse. Dessa egenskaper sa?tter sig som undermedvetna bilder hos konsu- menterna och speglar fo?retagets verksamhet.

In this report a system for Rapid Control Prototyping, RCP, is evaluated through animplementation of the motor control methods Field Oriented Control, FOC, and Space VectorPulse Width Modulation, SVPWM. The evaluation emphasizes on time-consumption andresource utilization on the used hardware and on usability for of software.A new mechatronic laboratory is under development at ABB Corporate Research in Västerås. Itwill be used for both mechanical and motion control design using existing and new hardware.The control structure in a traditional robot system will be interfaced to a rapid prototypingsystem which should allow easy changes to algorithms at different levels in the system.The system designated for this project comes from National Instruments and constitutesLabVIEW Real-time and FPGA module as the software tools. The hardware is a NI Single-Board RIO (Reconfigurable Input Output), sbRIO, development board including a Field-Programmable Gate Array, FPGA, from Xilinx and a microprocessor from FreescaleSemiconductor. Graphical programming is performed in the LabVIEW environment, andthrough Xilinx tools the LabVIEW FPGA code is compiled to VHDL code.A pre-study was carried out to clarify the concept of RCP and investigate different systems forRCP and their traits.

This research looks into the modern revival of opera based on the study of two recent productions of Giuseppe Verdi?s Don Carlo; the first is the 2010 production at the Gothenburg Opera in Gothenburg, Sweden and the second is the 2013 production at Großes Festspielhaus in Salzburg, Austria. The goal is to discover what aspects a contemporary audience can relate to and identify with and why opera is still relevant today. This has been done partly through a semiotic analysis of the visual image (e.g. set, costume and lightning) and partly through a hermeneutical analysis of the themes in Don Carlo.

In this essay, I have interviewed six young women about their views on body image and how their views are affected by their surroundings, massmedia and social media. Also the relationship between body image and eating disorders is relevant in this context and has a part in the study. The purpose of this study is to build an understanding of how young women relate to the body ideal that exists around them. Theoretical auxiliary tools used are George Herbert Mead's theory of the generalized other, Erving Goffman's theory of dramaturgical perspective and impression management, and Du Bois's theory of double consciousness. I have also used two scientific articles to get a deeper understanding of the subject.

The purpose of this qualitative study is to investigate how the welfare officer who works in the child and youth- habilitation is documenting in boys and girls journals. We also want to see if there are any differences or similarities in the journals on the basis of a gender perspective? The investigation is made from ten journals, five boys and five girls in the ages from 13 -18 years. The analysis which proceeds from prior research made on this area and from a number of gender theories and gender perspectives is based on a hermeneutic nature. The results show that the welfare officers make more documentation about the boys´ school situation than the girls´.

The purpose of my study is to explore teachers reasoning regarding the motivation of students in religious education. I investigate the teachers' expectations of the students' behaviors which are being judged by the teachers, in order to assess whether the students their classes are motivated or not.                      In order to present views of the teachers? reasoning, the study uses qualitative method and is based on interviews, conducted with eight different high school teachers.The results show that teachers tend to expect the motivation of the students to contradict their own expectations before starting a course or they presume that the expectations are going to be confirmed in class. Furthermore teachers seem to have preconceived ideas regarding how motivated or un-motivated students behave in class.

Lyckebo farm is the original name of the four building big farm, where year 2000, the former farmer established Maglarp/ Lyckebo golfcourse on his land of culture. In 2007, new owners are approaching the Maglarps golfcourse with thoughts of expanding the business. A first step in that direction is to form the area of the entrance, the specific area the visitors are staying at before entering the actual golfcourse to play. The designproposal is inspired by the peasant garden history of southern Sweden during the nineteenth centuary. It also aims to satisfy the demands of function and usefullness of a golfcourse today.

The companies of today figures on a hardly competitive market. This makes it necessary for the company to find new way to create competition advantages. Since it is no longer enough to compete with the technical quality of the product the companies are forced to also enhance the functional quality. To accomplish this it becomes necessary for producing companies to be customer oriented. A customer oriented company culture can be reached with the help of internal marketing in which different activities work to inform and teach the employees about the company strategy and also about their own role as part-time marketers.This thesis examines Electrolux, a company which is currently striving to develop a customer oriented company culture.

This has been a thesis work for an bachelor degree at Umeå university. The work has been done at LKAB?s facilities in Kiruna and its main purpose has been to investigate and construct some conceptual designs for replacing a screen with magnetic separation in KA3 concentrator plant. First all information available about magnetic separation was gathered and studies of magnetic separation at the sorting plant and studies of the plant KA3 was conducted. Companies that manufacture magnetic separators were contacted.