Nowadays naval units are participating in international missions, where new and in many cases tougher conditions will affect their propulsion. This essay deals with some of the now developed nanostructure coatings and gives a presentation of how the coatings could function on some exposed parts of the naval powertrain. The essay investigates the possibility that the coatings can be used as a protective layer that will reduce or prevent wear on selected parts of the naval powertrains. As a basis for the essay, nanotechnology is described, as well as different reasons that wear occurs and application techniques for coatings The conclusion is that nanostructured coatings can be applied and provide a much better result on hardness and wear resistance as of naval powertrains compared to micro-structural coatings, both for manufacturing and renovation. The essay presents a few examples of the military utility of the nanostructure coatings as well as suggestions for further research..

The problem being examined is the disturbing noise that is created in an open plan office on a company working with a creative process, such as a newspaper or a communications agency. The purpose of this study was to examine the needs for today for a sound absorber in open offices and create and design a design proposal. The aim is also to develop a marketing material the product proposal. The problem has been broken down into the following questions:- How does the user look at the need of a sound absorber in an open offices solution today?- Does an interior designer apply sound absorbers when they furnish the intended environment? - How can a design that meets the needs that exists be achieved and to speak the user?The study is based on three choice of methods a literature review on selected topics that relate to the topic, an interview with an interior designer to explore how an interior designer applies absorbers in open plan office and finally an extensive survey that treats the user's needs and appropriate appearance for the product proposal.The design process has undertaken the following methods, design brief, requirements specification, functional analysis and sketches to produce the final product proposal.

Bachelor essay in political science by Andreas Byfeldt, autumn 2007?The practice of deliberative democracy- limitations or enhancements of representative democracy??Supervisor: Erik AmnåThe purpose of this study is to find out what impact the practice of deliberative democracy might have on a representative democracy. What effects deliberative democracy could have in this context are scientifically as well as publically relevant seeing that participation in representative democracies as well as the forms of representation is altering.The essay contains both a theoretical segment and a case study. The information regarding the case is based on the results from a questioner, conversations by and observations from the author. In addition an analysis is performed in the case study.The conclusion of the essay is that there is too little empirical research on the subject of deliberative democracy to make a qualified conclusion about what effects the practice of deliberative democracy could have on a representative democracy.

ABSTRACTThe aim of this study is to analyze the aspects which have formed music-students? interest to perform music in various ways. Two of these aspects are family and school. Furthermore, -the study analyzes what music itself, and its performance mean in these students? social and personal lives.

The aim of this Master of Science Thesis is to develop guidelines and improvementsuggestions of RiNOVA Traffic AB?s dynamic speed bump. The project started with athorough pre study of the design and its function to find out how passing vehiclesaffects the dynamic speed bump. The majority part of the pre study was to createnecessary mathematical models to explain the arisen forces and strains.The results of the mathematical models gave necessary information about the designregarding weaknesses and flaws. The most critical ones where those which interferedwith the design?s performance and reliability, and therefore needed to be corrected.These problems where more thorough analysed and discussed with experts before thefinal guidelines and improvement suggestions where developed.The parts of the design that had to be redesigned were the extension springs and thebearing that enables the dynamic properties.

This thesis aims to analyse a time series containing the annual accumulation rate of minerogenic matter in the lake Kassjo?n. First there is a theoretical survey of some frequently used tools for the analysis of time series in the time domain and in the frequency domain. This survey is followed by a simulation study that illustrates how the theoretical tools work in practice. After this, the time series "toolbox" is used to analyse the time series from Kassjo?n (5701 data points).

Could patterns change the way we as consumers feel about a product as it ages and wears down? Why do some products increase their value as they are being worn downand others do not? Could the same affection that increases with your favourite jeans or an old, worn down, scratched and beautiful wooden furniture, be applied on otherproducts with different ability?s and history?The goal was to explore patterns and beautiful aging in products to increase the consumers desire to keep the well used product a little bit longer. Not to prolong the products ?lifetime? from brand new till it?s no longer inhabit their main function, but at that precise momentwhen you as a consumer decides to through it away in favour for a new, updated version. To buy ?new and fresh?.Patterns with different expressions, colouring and size, were explored that increase the value of a product which in this project contained handles and varies of surfaces on casseroles, frying pans, whisks, cutlery etc.

Inventory management is a key part of a company?s logistics function and is of great importance to companies as it is a substantial cost. It is of high importance for a company to make sure that the warehouse is efficient as possible. In this thesis two factors that hurt a warehouse?s efficiency are introduced; inventory inaccuracies and lead-time variations.This thesis has been dedicated to analyze how inventory inaccuracies and lead-time variations arise and how to eliminate them.To be able to solve this question we have used a qualitative research method.

Botanically diverse pastures are commonly used in New Zealand to reduce the ruminant environmental impact by reducing the methane production from the rumen digestion. In order to evaluate the effects diverse pasture species have on the milk fatty acid profile seventy-two lactating Friesian-Jersey crossbred dairy cows were used in a randomised block design with two replicates of six treatments. Six different pasture mixtures were fed at a daily allowance of approximately 15 kg DM/cow/day. The mixtures were categorised as either a simple or a diverse pasture. The simple mixtures all contained white clover with the addition of either a standard diploid perennial ryegrass (RG), a diploid high sugar ryegrass (HS) or tall fescue (TF).

Environment friendly transports are one of the main topics in the industry and society today.Shell organizes an annual university competition called Shell Eco Marathon. The goal is to buildthe car that consumes the least fuel during a race. KTH participated for the first time in 2006.The engine for this competition, DoubleTwo, has been developed within the school. Theprinciple is a two stroke counter piston HCCI engine with variable compression ratio. HCCIstands for homogenous charge compression ignition.

This report deals with the design of a controller for SmartMedia? flash memory cards, based on a hardware description found in the SmartMedia? Interface Library - SMIL. The design was made on logic gate level, using standard cells in OrCAD Capture. After simulation of the design in PSpice A/D, it was exported as an EDIF netlist, which was used to make a chip layout in L-Edit, a layout tool for making integrated circuits. The layout was made using a method called Standard Place and Route - SPR, where the layout tool places standard cells from a library and connects them according to the EDIF netlist.

Legionella can be prevented, the question is how. This report is a degree in construction engineering education at Chalmers University in Gothenburg. A comprehensive written publication for Legionella-safe plumbing installations is not available and therefore requested. The purpose of this report is to present preventative measures against Legionella bacteria growth in tap water and in other systems where Legionella bacteria are a potential problem. Technical solutions are presented including how different systems function and what their advantages and disadvantages are.

The purpose of this thesis is to determine whether the student councils at two schools really have the power to influence, or if it is a matter of mock democracy. I wanted to determine how the student councils work in reality. I conducted my investigation through personal and qualitative interviews with the board of the student council, a social studies teacher and the principle/school management at both schools. After the interviews I compared an analysed my findings. The results show that the two schools work very differently when it comes to studentdemocracy, and even have very different levels of ambition when it comes to the degree of influence that the student council should have at their respective schools.

The present study aims to examine how teachers write polemical articles. This genre often occurs in national standardized tests in Swedish schools. The study seeks to analyze argumentative structures in the articles. It also categorizes assessment notes written by the teachers in response to each others? articles, by interpreting response texts.    The examination shows that there is uncertainty among the teachers about how to create structures in argumentative text types.

Till följd av globalisering och en växande konkurrens ställs det i dag allt större krav på organisationer. För att möta den hårdnande konkurrensen är det vanligt att företag implementerar olika kvalitetsprogram. Dessa förändringar ses som nödvändiga åtgärder för att kunna bibehålla marknadsandelar och vara konkurrenskraftiga. Genom att införa Lean-verktyg och arbeta med ständiga förbättringar minskar riskerna för att produktionen läggs ned eller flyttas till lågkostnadsländer.Som examensarbete har författarna valt att studera ett av dessa Lean-verktyg som används för ställtidsreducering. Verktyget benämns SMED och står för ?Single Minute Exchange of Die? vilket syftar till att öka maskintillgängligheten genom effektivare verktygsbyte mellan olika produkter.