A new type of device for measuring thev m& ?rate of fuel sprays from a diesel fuel injector has been developed and the various steps in the development are described. The device works by deflecting all of the sprays from the injector at the same time by using a bell shaped deflector. A load cell consisting of a machined steel part with strain gauges mounted on it measures the resulting force. The shape of the curvature in the deflector bell shape has been evaluated by photographing the flow in a 2D?version of the curve shape.

The smelting process at Sapa Profiler AB in Sjunnen generates large quantities of waste heat which is absorbed by the cooling water when the aluminum is cooled down. This paper is the result of a Master?s Degree Project aiming to present the conditions for recycling the waste heat. The cooling water absorbs the heat from the aluminum at an average rate of 600 kW and the paper shows that it can be used to replace electrical power consumption for heating the production plant?s facilities.

AbstractTitel: Diagnosing accountability, a study of accountability of UNT and DN?s medical journalism  ( Diagnos av ansvarstagande, en studie av accountability inom DN och UNT:s medicinjournalistik)Number of pages: 45 (59 including enclosures)Author: Alexandra JohanssonTutor: Göran SvenssonCourse: Media and Communication studies C Period: Fall 2008 University: Division of Media and Communication, Department of Information Science, Uppsala UniversityPurpose/Aim: To evaluate the quality of medical journalism in DN and UNT according to the theories of accountability and responsibility in the media.Material/Methods: The materials and methods used in this thesis are 14 articles from DN and 14 articles from UNT that have been analyzed according to the criterion set forth by Media Doctors, an Australian media accountability system.Main Results: The results showed that DN scored an average of 57% ?satisfactory? and UNT scored an average of 52% ?satisfactory? of Media Doctors rating scale. Strengths were an educational tone and an insightful review of the newest findings in the scientific community. Weaknesses were poor transparency and a tendency to neglect full disclosure of the scientific findings and sources. Focus was also show to be on research and not on information for potential patients.

The low bearing capacity of roads during the spring thaw and periods in the autumn leads every year to increases costs for Holmen Skog. To reduce costs and increase accessibility Holmen Skog decided to install and test a CTI-system. Central tire inflation (CTI) is a system that makes it possible to monitor and vary a vehicle?s tire inflation pressures from the cabin, while the vehicle is in motion. When tire pressures are reduced, the area of the contact surface between the tire and the road increases, thus reducing the ground pressure. The purpose of this study was to evaluate the CTI-equipped vehicle and analyze if the CTI technology is economical defensible during the thaw 2005.

To invent an optimized product is a complicated process. This process is only half of the work. It is equally important to develop a production system that can produce the product in an  efficient and ergonomic way.After several evaluations of conceptual and detailed drawings a final idea has come to light.The idea intends, to the maximum extent, utilize the facility in a more efficient way through moving assembly lines and stations closer to the flock section and the stock for complete products. To make the production better, stations are placed in more logical places given the assignment they are supposed to accomplish. This improves the material flow radically.

Linjäriseringar av olinjära system är mycket relevanta eftersom det finns en i förhållandevis enkel och omfattande matematisk teori kring linjära system, till skillnad från allmänna olinjära system.För vissa olinjära system är det svårt eller inte ens möjligt att genomföra en analytisk linjärisering.Orsakerna till detta kan vara hög komplexitet av systemet eller avsaknaden av ett analytiskt uttryck.Numerisk analys kan vara en lösning på detta problem.I detta examensarbete används framåtdifferens och centraldifferens för att genomföra de derivata-approximationersom behövs för att genomföra en numerisk linjärisering av ett olinjärt system.Rapporten behandlar även vad som sker då det är dålig upplösning på den indata som används när man genomför enlinjärisering, vad som händer med heltal och binära signaler om de ingår i ett system som linjäriseras ocheffekten av att ha olika samplingstider för olika delmoduler i ett system som linjäriseras.Slutligen undersöks numerisk bilinjärisering av ett system på bilinjär form och en jämförelse mellan analytisk linjärisering och bilinjärisering görs..

Banverket Trafik has a responsibility to make sure that the companies who traffic the Swedish railroad have the correct information about the status of the railroad. One of Banverket Trafiks information systems (Opera) presents the train?s actual position on a map and provides the user with physical information about the trains. Due to increasing demands on the information systems, Banverket Trafik needs to update the present system architecture in order to manage the increasing demands on map graphics and map functions. This paper analysis the information system Opera on the basis of theory and support of methods and discuss problems and demands for Opera.

Inadequate data quality has a negative effect for organizations, however utilization of modern technology and data analysis may shape new values for organizations. Our research has found that the quality of information in field reports for error reporting varies significantly. In many cases, the information in the field reports are deficient in such way that the field report need additional information from the sender, thus risking prolonging lead times in the error reporting process. More efficient use of information has become possible with today?s technology.

Användbarheten av IT-system förbättras ständigt och företag har fokus på att förbättra sina IT-system som företagets kunderna använder då det leder till fler och nöjdare kunder. Annorlunda ser det ut för interna IT-system, alltså datasystem som används av medarbetare och som ska förenkla arbetsuppgifter, effektivisera arbetet eller även möjliggöra att utöva arbetsuppgifter vid en arbetsmiljö på distans. Användbarheten av interna IT-system står inte lika mycket i fokus som användbarheten av kundcentrerade system och istället för att åtgärda brister i användbarheten tvingas medarbetarna att lära sig hantera IT-systemets brister.Utgångspunkten för arbetet var funderingarna över vilken betydelse användbarheten har för ett företag när det gäller interna IT-system vid en arbetsmiljö på distans. Ansatsen var att undersöka om användbarhetsproblem i praktiken leder till att användarna upplever ett IT-system som dåligt i den särskilda situationen av ett arbetsmiljö på distans. I en fallstudie utvärderades ett IT-system som används av försäkringsombud som arbetar på distans med hjälp av en enkätundersökning och användarintervjuar samt hierarkiska uppgiftsanalyser.

I denna rapport har vi undersökt hur utvecklarna tagit hänsyn till användbarheten för slutanvändarna vid utvecklingen av ett säkerhetskritiskt system. Resultatet erhölls genom en empirisk fallstudie på två företag som utvecklar säkerhetskritiska system. Datainsamlingen bestod av intervjuer med personer som varit delaktiga i och har kunskap om utvecklingen av systemen som ingick i vår fallstudie. Sedan analyserades insamlad data mot teori inom Människa ? Dator ? Interaktion (MDI) samt teori om säkerhetskritiska system.

This thesis examines how knowledge management professionals use trust as a component in the creation of knowledge management systems, and what methods they use for building trust.Adopting a grounded theory approach, interviews with 8 knowledge management professionals active in different industries served as the base for an analysis that identified trust to be the single most important common factor in the data. The concept of trust used by the informants was identified as relating to the knowledge management system itself, rather than other users, employees or groups in an organisation.Building trust, the KM-professionals mainly focused on three methods: simple solutions, system superiority, and implementation security. Using these methods, the KM-professionals seek to ensure system trust by creating opportunities for users to obtain positive experiences of using the system, and thereby generate a foundation for a trust-based relationship between the user and the system..

Trioplanex International AB is a part of the group Trioplast Industrier AB, which produces packaging materials for the film and hygiene industry. The group is active throughout Europe, where most of the production is located in Sweden, with head office in Smålandsstenar. Operations in Landskrona consist of Trioplanex International AB and Trioplast Landskrona.Semi-finished articles consisting of paper cores, so called bobbins, give rise to a high amount of core waste in any form of core cutting. The objective of the report is to map out all core waste and illustrate the material flow with regard to present layout and equipment.In the beginning of the project an analysis of the current process was carried out with focus on the cutting equipment. A case study in the form of an improvement work took place in order to reduce the causes which had the biggest impact on existing machinery.Improvement proposals were discussed by the author together with supervisor, assigner and other parties involved.

Denna rapport tar upp problem med revisionskontroll i realtidsbaserade kollaborativa system. Enligt Fan & Sun (2012a); Fan & Sun (2012b) behöver man bryta kraven som definerar realtidsbaserade system för att uppnå detta.Den stubbaserade lösningen som beskrivs i rapporten lyckas minska antalet fel i testfallen som utförts i fallstudierna. Genom att implementera personliga editeringsflikar och stubbar är det möjligt att ha revisisionskontroll i ett realtidsbaserat system. Dock för att detta ska vara effektivt och användbart bör detta endast användas i specifika fall och med noggrann granskning.Fallstudien som genomförts visar inte på några imponerande siffror men en förbättring är fortfarande möjlig vid specifika fall..

This essay focuses on the term usability while conducting a user centred system design. Usabilitymeans to what extent a user can use a product to achieve effectiveness, efficiency and satisfaction.Development using a user centered system design means that knowledge about the end-users andit?s opinions becomes a crucial part of the development process. The question of this essay is if usinguser centred system design will lead to good usability.We used methods from a user centered system design point of view while developing an applicationfor a Swedish bookstore company called Bokia AB. This included user and task analysis following by aclose relationship between the developers and end-users by using sketches and showing themprototypes of the system while collecting feedback.After concluding our case study we determined that using methods from user centered systemdesign could be used as a great tool to further improve the usability and to improve an applicationssuccess chances..

Logistics is an important concept in the organizational context in which the planning of flows, services and products are treated. Logistics handles supplier management, supply of materials, production and distribution. The distribution of goods can be managed with different types of transportation depending on price and time aspects. The lowest transport cost for larger amount of goods is by maritime shipping. A common carrier used in transportation of goods is a standardized ISO- container.