This master thesis was conducted during the spring of 2014 at Atlas Copco Rock Drills AB in Örebro. The purpose of the thesis was to develop a simulation model of the rotation system for a hydraulic rock drill. In the future, the model will be used to investigate the phenomena called ?jerky rotation?. In order to validate the simulation model a test bench was designed and tests were made.

The 1990s were one of the most profitable periods for European airline companies, mainly because of development of world economy and increasing globalisation trends. However, towards the end of the decade, a global economic downturn, high oil prices and new forms of competition turned the industry towards troubled times. The European air-travel industry had to face and accept the new airline business concept, called low-cost or no-frill airlines. In these conditions, traditional airlines had to rethink their strategies and question the old business model. As a response to the competition, European traditional full-service airlines formed alliances or networks to expand the route network and to increase efficiency.

The purpose of my project was to explore variability. I wanted to combine different ways of sitting and create some kind of seating furniture that could be changed to fit different kinds of situations and needs. I sought after a way to express safety and stability in the seating furniture and at the same time make it clear that it could be changed into something else or something more. It was very important to me that the furniture piece would have a long lifetime and would be something you kept for a long period of time. I decided that the changeable factor in my piece would be the possibility to change it from being a chair for one person into being a bench for two people.

A multivariate cross-sectional model is used in this thesis to proxy for expected earnings and to estimate return on equity for 214 companies over the period 2009-2013, using Swedish data. The model, which has never been tested on Swedish data before, is first confirmed to function as a forecasting model for expected return. Furthermore, the model is evaluated through a comparison with two univariate models based on the assumption that return on equity follows a mean reversion process. Forecast accuracy is calculated as the difference of estimated returns and actual returns. The results show that the univariate models' forecasts are superior to the multivariate model's..

This paper describes the development of a simulation model for the ambulance flow in the Västra Götalands-region of Sweden, and an analysis tool for the output of the simulation model. The aim of the simulation model was to be able to evaluate the outcome from changes in the ambulance operations, such as a reorganization of ambulances or an increase in intensity of the ambulance calls. This evaluation is meant to serve as decision support for the strategic planning of the ambulance operations. The analysis tool was developed to visualize the abundant geographical data produced by the simulation model in a meaningful way. The simulation model was validated against historical data which showed that the dispatch time for the highest prioritized ambulance calls corresponds well with historical data.

The reindeer planning system (Renbruksplanen, RBP) is a communication and planning tool designed for Sami groups. A key purpose of this is that it will act as a tool in consultation with other market players, including forestry. Sami groups have asked for a model of how this can be used in a flexible manner. With the Swedish Forest Agency as a project manager, a communication model for how to use the RBP has been designed. It consists of a number of points divided into ?before?, ?during? and ?after? the consultation.

Social enterprises make up one of the groups of participants that provide welfare services financed by public funding. The object of this study is to describe and analyze from a theoretical point of view which conditions, in what fields, by which division of responsibility and finally through what decisions these social enterprises are allocated a place in the market for social welfare services. The company that has been the object of study offers services in the field of social welfare and in employment. In the study a triangulation of qualitative methods has been used: studies of literature on the subject, recurrent interviews and observations and also reviews of documents. The results have been analyzed from theories on the space available on the market for social services, on social economy and on social capital in the form of strong, weak and bridging bonds.

This paper describes the development of a simulation model for the ambulance flow in the Västra Götalands-region of Sweden, and an analysis tool for the output of the simulation model. The aim of the simulation model was to be able to evaluate the outcome from changes in the ambulance operations, such as a reorganization of ambulances or an increase in intensity of the ambulance calls. This evaluation is meant to serve as decision support for the strategic planning of the ambulance operations. The analysis tool was developed to visualize the abundant geographical data produced by the simulation model in a meaningful way. The simulation model was validated against historical data which showed that the dispatch time for the highest prioritized ambulance calls corresponds well with historical data.

I have made a research about two different methods for introducing small children to Nursery School/Kindergarten. I choose to do this as I have found very little about this in the literature we have studied during my education to become a pre-school teacher.This period in the life of very small children and their parents is a big change in their daily life. The more traditional way to start pre-school is to do it very gradually during two weeks, the two-week method. This means that the parents visit the pre-school together with their child for a very short time, about one hour the first day. After one week they leave their child with the staff for about an hour and at the end of that week they try to leave it full time (6-8 hours).

The most predominant method for forest harvesting in Sweden is the cut-to-length method based on two-machines, a harvester that fells trees and cut them in a predefined length, and a forwarder which transports logs to a landing area for further transport to a processing facility. New machine solutions have to be much gentler to the ground than today?s machines. To be able to develop a forestry machine that preserves the terrain requires a proper understanding of the interaction between tire and soil.The goal of the project is to contribute to the existing knowledge of forest machine tire-soil interaction and to develop a tire-soil model that enables dynamic simulations of forest machines operating in rough terrain. The modeling has especially been focused on the interaction between tires and soft ground.A comparison of theoretical data of different WES-based terrain interaction models and a comparison test data from a full scale field test is presented.

Many researchers emphasize the increasing strategic importance of supply chain management, but there is still a lack of concrete guidance for managers faced with strategic decisions in supply chain. Within decision-making theories, the rational decision-making model is the most commonly used. This because of its suitable foundation, enabling a structure to the complex decision process. The rational decision-making model is today not developed to include the aspects of strategic decision-making made in supply chain. The purpose of this research is to adjust a structured rational decision-making model, making it applicable for strategic decision-making in supply chain.

This diploma work has been conducted for the consulting company Ramböll inUppsala, Sweden with the purpose to perform a study with the calculation programFEM Design 9.0 made by Strusoft. The aim has been to find out if it is possible to gainadvantage by utilizing more advanced 3D software for design calculations, instead ofthe traditional methods currently used in construction works.The method of approach has been to model an existing warehouse building with theprogram FEM Design, and then compare the results with those attained with FrameAnalysis and hand calculations. These results are then analyzed. An evaluation is maderegarding to what benefits can be achieved using a more advanced 3D-model.The results of the study show that the differences between the methods are not ofany significance with regard to the design of the steel frame. However in morecomplex materials such as reinforced concrete, the differences become more notable.The conclusions drawn by the authors of this study into FEM Design are that theeducation requirements of the program are higher than for simpler programs, whosepurpose are solving predetermined problems.

This study aims to seek knowledge of the salutogenic model within geriatric care. This is done by problematizing the female geriatric care personnel?s everyday life and conditions. The study?s comparative empirical focus includes interviews with ten women that work within geriatric care, at two different workplaces.

This thesis treats the subject of a complete steady state and dynamic model of the VSC-HVDC covering both the AC and DC system-side of the converter. The topology of the model is recreated after the scheduled transmission line in the south of Sweden, called SydVa?stla?nken. The topology covers both a simple two terminal connection as well as a multi-terminal one. This model is to be implemented in the power system simulation program ARISTO.

The purpose of this development project is to create a model for working with a high school project in Electrical and Energy Program. It should be conducted in a form like companies do according to the goals from The Swedish National Agency for Education. In order to fully perform this we use the concept of Young Entrepreneurship. The model is created according to the new conditions from The National Electrical Safety Board. There is now an exception saying that a student during education is released from the demand of employment that is the normal procedure where you are under supervision from a certified electrician. During the project there has been theoretical and practical examinations in order to clear out the advantages and disadvantages using this model, but also to examine whether it is useful in the future and to what extent it can be used. The result indicates that the model is useful and fulfills the goals from The Swedish National Agency for Education but that the model has its limitations and difficulties.