The research work performed in this thesis has been carried out at the Production Tech-nology Centre where the Thermal Spray research group of University West has its work-shop and labs.This research work has been performed in collaboration with the International Advanced Research Centre for Powder Metallurgy and New Materials (ARCI), Hyderabad, India.First of all, I would like to express my sincere thanks and gratitude to my supervisors Dr. Nicolaie Markocsan and Dr. Nicholas Curry for their guidance, great support and valuable suggestions without which this work could not have been possible. I would also like to thanks Prof. Per Nylén for keeping faith in me and providing me an opportunity to work at PTC, which is a great place to perform research.

Today, buildings utilize 40 % of the total energy consumption. New energyrestrictions and directives have entered the construction industry. Photovoltaic is asustainable, clean and quiet solution that integrates well in the urban environment buthave not yet reached a breakthrough on the Swedish market. The conditions for solarenergy production are often set in the early planning stages where they rarely arebeing prioritized.This master of engineering project focuses on identifying problems regardingimplementation of photovoltaic in city development projects and giving suggestions topossible improvements in the planning- and construction process. It also givesrecommendations on how the conditions for energy production can be optimized inthe early zoning stage.By conducting simulations with PVsystV5.21, on three ongoing city developmentprojects in Umeå, Malmö and Stockholm and by carry out and analyzing interviewswith city planners, constructors and architects, some conclusions have been made.Several improvements, both politically, with changes in the subsidization systemand/or instatement of a new law with feed-in tariffs, and within the solar- andconstruction industry itself, with better communication between different parts of theprocess as well as better use of experience, can be made.

In today?s fast growing and closely connected society, a reliable and energy efficient transportation system is more than ever desirable. Nowadays the significant part of the transportation sector?s energy demand is supplied by fossil fuels.Improving energy efficiency in combustion engines will result in reduction of fuel consumption and CO2 emissions. A modern internal combustion engine has an efficiency of 30-45 %, where the most energy loss occurs as result of heat losses in the exhaust and cooling systems.

The Swedish government has set up the overall goal that no net emissions of greenhouse gases can occur after 2050. A sub-target has been developed for road transports which states that the use of fossil fuels must be reduced with 80% to 2030 in order to be completely abolished to 2050. A public inquiry mapping how this can be achieved was handed in to the government late in 2013. The use of alternative fuels for road transport, both biofuels and electricity, is expected to give the biggest contribution to the reduction of the use of fossil fuels. The inquiry sets up a number of goals for how much the use of alternative fuels must increase to 2030 in order to reach the overall goal and which instruments that are needed in order to do so.The aim of this thesis is to evaluate how these goals can be reached and what the most likely obstacles that may hinder the reaching of these goals may be.

The Common Agricultural Policy the European union´s common agreement about the agriculture financial support. A major change is about to take place in the next 3 years. This reform affects the first 15 members as well as the 10 new members in CAP2. This study contains a future of how agriculture will look like in Sweden in 10 years. The study is mainly based on interviews with key-persons3 in Sweden. The first part describes the CAP-reform in theory, the second part the interviews and the last is a conclusion of the material. The future will see larger farm units.

Many workplaces around the world use some kind of presentation software as an aid during presentations. At Westinghouse Fuel Service in Västerås they experienced that they didn´t know how to use this medium to its fullest extent. They wanted to increase awareness of presentation skills with PowerPoint among the employees, to improve their internal and external communication. A desire they are certainly not alone to have in the working life.My research studied how to design guidelines for the use of presentation software, so the users can easily absorb the message and find motivation to use the guidelines. In order to adapt the guidelines to their users, and thus create major opportunities for them to absorb the message, I based my study on the concepts legibility, readability and reading value.

The aim of the project was to develop a method to investigate differences in adhesion of microorganisms to materials that contains lignocellulose. The method was tested on a gram-positive (Micrococcus lutea) and one gram-negative (E-coliJM109) bacteria.The study was begun by cultivation of the two microorganisms. The cultivation was done to calculate the generation times of the bacteria and to obtain growth curves. Cells from these cultivations were also frozen (-70ºC) and later used for inoculation.At STFI-Packforsk AB the total charge on the mass was measured and later a conductivity titration on the mass was executed as well, all to find out more about the different properties of the mass. Properties that in a later part of this study could possibly be linked to the adhesion of cells to the pulp.

The ferry traffic to Gotland is essential for the island?s ability to live and develop. Yearly, it transports 1,6 million passengers, 500 000 personal vehicles and 750 000 lane meters of freight with four Ro-Pax ferries. The traffic is controlled and subsidized by the Swedish government since 1971 in order to guarantee the inhabitants and industry of Gotland a satisfactory transportation service. As a consequence of the past decades increased traffic quality, mainly due to a decrease in crossing times, the traffic?s environmental impact and costs has also increased.The Master Thesis proposes a new energy efficient traffic arrangement that satisfies the users? preferences in the same extent as today.

Sweden's government is dedicated to the goal of having a vehicle fleet that is independent of fossil fuels by 2030. Achieving these goals requires, among other things, new types of fuel that give lower net emissions of carbon dioxide. The present market includes stations offering lowlevel blends of renewable fuels in conventional diesel as well as some stations offering renewable fuels only. The purpose of this study is to survey purchasers? attitudes to the use renewable fuels in roundwood and bioenergy transport in forest- and energy companies. The study was based on qualitative interviews through a combination of face-to-face meetings and telephone interviews with each sample group. The total number of respondents was ten (10), consisting of five (5) from forest companies and five (5) from energy companies. Transport service purchasers were generally positive to renewable fuels and considered these necessary in the future.

The present study discusses the metabolism of ethanol in the human body from the ingestion of ethanol to the excretion of its break down products water and carbon dioxide. Ethanol is a small molecule, soluble in water as well as in organic solutions. It is quickly distributed to every section in the body, where it exerts a direct toxic effect on the cells. Ethanol cannot directly leave the body efficiently so it needs other metabolic pathways. The molecule is metabolized by oxidation, predominately in the liver.

This report relate a concept study that consider a number of different proposals to improve the overcharging system in BAE Systems Ha?gglunds tracked vehicle series BvS10, to maintain sealevel power at extreme altitude.At high altitude the power losses beacuase of the air density that decreases, which results in less fuel can be burned. The decreasing of air density also gives rise to fatigue failure of the turbocharger unless power is reduced.The proposals shall be as required by BAE Systems Ha?gglunds economically sustainable and defensible from a packing perspective. That means the selected solution must have a reasonable price tag and at the same time a minimal impact on adjacent components.The basis for this thesis is based on benchmarking of both the auto industry as the flight industry, to find inspiration and tips for improvement.Some of the concepts have after gathering facts and calculations been excluded while other solutions has been considered as workable and thus interesting for BAE Systems Ha?gglunds.Initially the current turbochargingsystem was analyzed in order to determine the starting point and thus be able to fix the current problems surrounding high altitude driving.

Immune stimulating complex (iscom) matrix is a formulation that is used as anadjuvant within research. The capability of the iscom matrix to elicit an immuneresponse when not present together with an antigen has not been extensivelyinvestigated. One way to evaluate the status of the immune system is to measure theamount of cytokines that usually are produced by various cell types during an immuneresponse. The aim of the present study was to evaluate the early immune responses inporcine peripheral blood mononuclear cells (PBMC) after stimulation in vitro with theiscom matrix, AbISCO®-100. The immune response was evaluated by measuring themRNA expression for various cytokines, a chemokine receptor (CXCR4) andregulator of G-protein signaling (RGS16) in porcine PBMC after stimulation withAbISCO®-100 or other inducers like a lipopolysaccharide (LPS) and a CpGoligodeoxynucleotide (ODN 2216) used as controls.

A change towards using more biofuels than fossil fuels is taking place in Sweden, and in many other parts of the world. This makes the use of fuel pellets increasingly popular, causing a greater demand for sawmill sawdust products. There is a trend towards the use of multiple types of shredders, instead of a single type in each sawmill. The purpose of the study was to characterize the different flows of saw particles that can be found at Sävar såg when cutting thick or thin wood with different cutting techniques. The saw particles size, shape, moisture content and heat value were analysed by the cutting stations: first cutting fast and slow, second cutting fast and slow, grading fast and slow and planning.

When stormwater occurs near human activity the water gets polluted. The purity and composition vary widely depending on the types of activities in the area, the type of surface the water comes in contact with, precipitation and many more parameters. It has long been known that stormwater quality can affect both human health and the environment as stormwater is a major contributor to pollution of receiving waters.A human activity that has an impact on the environment in several different ways is traffic and stormwater is no exception. Airborne gases that react with precipitation, oil leaks and fuel systems that drops down on the ground, metals from brake linings and rubber particles from tire wear are some of the aspects you have to take into account when categorizing the relationship between traffic and polluted stormwater.In this project, stormwater samples from a parking lot in Halmstad, Sweden were collected and analyzed with an atomic spectrophotometer. The presence and relationship between copper, cadmium and zinc with different rainfall parameters have been studied.

Due to increasing regulations regarding new diesel vehicles particulate matteremissions the new Scania truck, Scania Euro 6, has been equipped with a particulatefilter. This component effectively stores the particles in the exhaust gas but must becleaned in order to prevent itself from clogging. The filter is cleaned through aprocess named regeneration which is a thermodynamic process in which thetemperature of the filter is raised through fuel supplied to the exhaust gas.The purpose of this thesis is to contribute to the development of improved controlstrategies of the temperature during the regeneration process through thedevelopment of model-based controllers. These controllers are designed in order tohave good performance in stationary as well as automatic regeneration.In order to develop these model-based controllers a model of the system isconstructed. The model is described as a linear thermodynamic grey-box model withflow varying parameters, showing good results in validation.The model provides a simulation environment during the controller design, which isfocused around the development of linear regulators with the exhaust gas mass flowas a scheduling variable whose size determines controllers? mode of operation.