Scana-Booforge is a Swedish company which specialize in heat treatment of various metal. The treatments take place in quenching ovens, where fans are used to circulate the hot air. The fans used today do not have a satisfactory lifespan. This thesis aims to develop a new design of the fans for the quenching ovens, and the goal is that the new fans will bring cost savings for Scana-Booforge.The design development process started with mapping out the environment in which the fans operate, and with analysis of the existing fan structure and damages, in order to establish the cause of failure and of short durability. The performance of the fan were also established at this stage.

This report is an outcome of a master degree project at Linköpings University in co-operation with Micronic Laser Systems AB. The purpose with this master degree project was to investigate how to implement a receiver in a data transfer system. The system consists of several data channels, where every channel consists of three parts: driver, transmission lines and receiver. The driver send low amplitude differential signals via the transmission lines to the receiver that amplifies and converts it to a single-ended signal. The receiver has to be fast and be able to feed an output signal with high voltage swing.

Today, buildings utilize 40 % of the total energy consumption. New energyrestrictions and directives have entered the construction industry. Photovoltaic is asustainable, clean and quiet solution that integrates well in the urban environment buthave not yet reached a breakthrough on the Swedish market. The conditions for solarenergy production are often set in the early planning stages where they rarely arebeing prioritized.This master of engineering project focuses on identifying problems regardingimplementation of photovoltaic in city development projects and giving suggestions topossible improvements in the planning- and construction process. It also givesrecommendations on how the conditions for energy production can be optimized inthe early zoning stage.By conducting simulations with PVsystV5.21, on three ongoing city developmentprojects in Umeå, Malmö and Stockholm and by carry out and analyzing interviewswith city planners, constructors and architects, some conclusions have been made.Several improvements, both politically, with changes in the subsidization systemand/or instatement of a new law with feed-in tariffs, and within the solar- andconstruction industry itself, with better communication between different parts of theprocess as well as better use of experience, can be made.

Environmental objective 17: Sustainable consumption - An attempt to integrate the global impact of the Swedish consumption with the environmental objectives system The aim of this report was to integrate the global impact of the Swedish consumption withthe environmental objectives system through presenting a suggestion for a seventeenth environmental objective ? Sustainable consumption. How the Swedish consumption pressures the global environment and methods to measure the affects was investigated. The pressure was divided into five main fields: climate, air, water, land and chemicals. The impacton humans and the biodiversity was also discussed, as well as differences between how men and women affect the environment and get affected when the environment changes.

Purpose:The purpose of this study is to improve the knowledge regarding how entrepreneurial companies act and behave in relation to human capital, by studying their decision-making process for human capital investments. Furthermore this study shall enrich the understandings for how their way of handling human capital investments might change over time along with the development, growth and aging of the company.Methodology:For this case study the authors have chosen a qualitative approach. The authors have collected the empirical data by interviewing the CEO?s of six different entrepreneurial companies. To be able to process and analyze the empirical data the authors have used various theoretical frameworks and also previous studies.Theoretical framework:The theoretical framework brings up human capital and its importance, but also its role in the entrepreneurial company.

For many years, there has been a housing shortage in Sweden. Many have been expecting a construction boom in the housing sector, but that has yet to arrive. With the current legislations and guidelines surrounding modern, energy efficient housing; production costs have increased dramatically in recent years. As a result, having a negative effect on housing production despite the high demand for homes.This exam work is carried out on a construction project of Sjötorpshus AB and its purpose is to evaluate how to optimise the construction process for the production of a new residential settlement, "Kv.Hunden", located in Katrineholm. In an interview with the company's MD, Pär Knutsson, four main issues were defined to focus on.

Det här examensarbetet har utförts på beräkningsgruppen inom hyttutveckling, Scania CV AB i Södertälje under perioden juni-november 2007. Syftet med arbetet har varit att undersöka hur utmattningsbedömning av hyttstommen kan förbättras genom användning av så kallade virtuella skakriggar. Främst har skadan på torpedplåten i hyttens front undersökts. Dessutom har möjligheten att använda metoden som utgångspunkt för att förenkla beräkning av krafter omkring hyttupphängningen undersökts. Med den virtuella skakriggen utgår man från uppmätta accelerationer och tar med en iterativ process fram de lastsignaler i hyttens infästningspunkter som ger samma beteende hos hytten som uppmätts i prov.

This thesis has been performed at Scania CV AB Technical Centre in Södertälje and its aim hasbeen to study the causes and effects of deformations in the interface between the rear axlehousing ADA1100 and the central gear house R780 during operation. Design changes that wouldincrease the sealing capability of the studied interface are also suggested. Finite element (FE)and CAD software have been the primary tools in this study.Finite element (FE) simulations are used in the industry to predict and develop engineeringdesigns. The main motive for FE simulations has traditionally been to identify weak spots in thedesign, regarding high tensions and large deformations.The FE model is an aggregation of submodels and interface models that represents the rear axlehousing, suspension, central gear, central gear housing, wheels, bolts and weldings, and theirinteractions. The submodels have different material properties and they are connected withcontact interface models.Boundary conditions are defined on the bushings in front of the rear axle and on the air bellowsbehind the rear axle.

In recent years, awareness of the climate change has increased around the world. Environmental issues have been taking into consideration, both by individuals and companies. Therefore the demands for new environmental friendly technology have increased, also known as cleantech. To further establish and develop cleantech it requires capital. Venture capitalists have as well seen the potential.To increase the number of Venture capital investments in cleantech, it is important the investments generate good returns.

In the EU there are EC Directives that Member States of EU should follow. Sweden has undertaken to transpose EC Directives regarding the working environment to Swedish Provisions.  In 4 April 2006, the European Commission had some criticism against the Swedish implementation of the Construction Sites Directive. The Swedish Work Environment Authority has in response to this criticism reworked the Work Environment Act and related provision about building and civil engineering work. The changes came into force 1 January 2009.These changes have resulted in some working methods and even new responsibility subjects must be reviewed. The purpose of this exam project was to investigate if contractors and clients in the construction sector, had have time to update themselves on this front and adapt to these changes.

As a company it is required to work with strategies to minimize costs such as packaging and logistic costs. The increased market of industrial produced wooden buildings results that the time and the cost which the packaging of prefabricated building elements consume, is experienced to be in greater need of development than before and demands a better solution. The aim with this dissertation was to discover how the development of the handling of the packaging can improve the packaging process. The goal was to present improvement proposals for a simplified and thereby a more efficient production in time and cost perspective.The packaging process which includes packaging, handling, storage and transport were studied. Interviews were made with participants from the market for manufacturers of wooden houses and a case study was made at the company A-hus.

Idag tar kunden de flesta beslut angående ett köp i butiken. Därför ska butikens interna kommunikation vara ett hjälpmedel för kunden att hitta vad den söker. Kommunikationen ska vara en mekanisk säljare, som komplement till personalen.Avsikten med arbetet är att svara på vilka betydelsefulla delar som ingår i butikens interna kommunikation och hur de kan skapa positiva attityder och köpbeteenden. Genom att analysera, undersöka och observera har vi kommit fram till vår slutsats. I Borås centrum har vi utfört en enkätundersökning.

The thesis presented in this report has been made on behalf of Scania and their basic frame design department with the subject to solve an implementation of a weight sensing system in the chassis. The system is supposed to be implemented in the seat springs, and the reason for this is that all the force will have to go through the weight sensing transducers. With all the force going through the transducers the weight sensing system will not be sensitive for the differences in tolerances from manufacturing. The transducers could be pre-calibrated to avoid a calibration of the whole vehicle after it?s completed from the manufacturing line.Weight sensing systems is today a reality in trucks with air springs.

This report is the result of a questionnaire survey done in cooperation with the company Sydved and their contractors. The investigation concerned all their ordinary contractors. The main goal with the study was to find out the contractors opinion about the current cooperation conditions with Sydved, their opinion about the future and how to improve the cooperation. All contractors got a questionnaire to fill in and return within a given date. The percentage of answers was 48 % at the first stage and further 11 % answered after reminder. The result of the investigation indicated that the contractors in general have a positive attitude to Sydved and the way that the company acts.

To increase the quality and the cost-efficiency of contract archaeology in Sweden a revisedregulation for contract archaeology was established the 1st of January 2008. By including findstrategy as a concept with special demands in the regulation the Swedish Heritage Board is nowhoping that the conservators will be integrated earlier in the archaeological process and that theunpremeditated find accumulations will stop. This is making the competition between thearchaeological companies even harder. The questions are how the regulation have affected therole of the conservators in the field of contract archaeology today, what is affecting theintegration and the situation, and what can the different stakeholders do to make the collaborationbetween archaeologists and conservators more professional? The conservators are now hopingthat this is the change that will increase the collaboration with the archaeologists, which isimportant for the finds prosperity and the drive of information.To get an updated and generalised view of the impact of the regulation so far, phoneconversations and questionnaires were carried out with archaeologists, conservators, employees atcounty administrative boards and the Swedish Heritage Board.