Title:Chillchain for cut flowers ? how the distribution works.Author:Anna-Maja Svarén, student at Lund Institute of Technology, mechanical engineering.Supervisors:Annika Olsson, Department of Design Sciences.Bengt Sahlberg, Bioett AB.Problem:How does the distribution of cut flower works regarding temperature, losses, responsibility, complaints, packaging and weak points?Purpose:The purpose is to map the distribution of cut flowers, with focus on losses in the temperature, from farm to store. The goal is to identify weak points in the chillchain and to se how wrong temperatures affect the flowers. The results can be a help to secure the chillchain.Method:The work started with a problem; map the distribution of cut flowers with focus on temperature losses. Data was collected on the basis of this problem, then analysed, and finally conclusions were drawn.Conclusions:The affect handling and distribution has on a cut flower is very complex.

The purpose of this report is to come up with possible improvement suggestions to the distribution central at Götene Stål & Verktygs AB (GSV). GSV is a wholesale dealer located in Götene. The company doesn?t produce anything it self, it buys in products and sells them to customers.The distribution central at GSV is the place where the products comes in and gets ready to deliver.To come up with possible improvement suggestions we started with process mapping over the main process and the distribution centre process. The main process here is from the point where the customer gives GSV an order to the point where GSV deliver the order.Our result shows that the major problem in the distribution central at GSV is the big volume differences in the incoming goods.

Rheumatoid arthritis is an autoimmune disease, where joints are attacked by the own immune system, leading to chronic inflammation and destruction of bone and cartilage. Inflammation is a complex process, controlled by many different substances. One of them is adenosine, which has anti-inflammatory properties. In this project, three polymorphisms in different genes, involved in synthesis and signaling of adenosine, were genotyped for 188 patients with RA and 362 controls without RA. The results shows that for the polymorphism in A2a, a gene coding for an adenosine receptor, there was no significant difference in genotype distribution between the groups.

The purpose of this master's thesis is to study how librarians at public libraries make the literature with state supported distribution available through marketing. By qualitative interviews with nine heads of libraries the thesis examines how the library staff in each library market the state supported distribution by the Swedish Art Council. My theoretical framework is based on Philip Kotler's thesis on marketing. My conclusion is that the library staff rather market the library as whole, than focus on just one specific type of books. The attitudes toward the state supported distribution are a mixed one, but the library staff is glad for what is given..

In healthy dogs, heart rate fluctuates during the day. Heart rate variability (HRV) reflects the autonomic nervous system´s regulation of the cardiovascular unit. Heart rate variability shows the balance between the sympathetic and parasympathetic nervous system, also called sympathovagal balance. Heart rate variability can be measured by time domain - and frequency domain analysis. In a time domain analysis you study the beat-to-beat-interval (RR-interval) in an electrocardiogram (ECG), while a frequency domain analysis can be used to determine the size of the variability.

Digital distribution för datorspel växer för varje år. Med tiden har fler och fler webbutikermed endast digitala produkter dykt upp, samtidigt som de gamla till en allt större del harbörjat erbjuda ett digitalt sortiment. Konsumenterna har med denna utveckling ett hav avolika typer av distributionsmöjligheter att välja bland. Vissa kan för en del konsumenterkännas restriktiva, medan andra webbutiker erbjuder en typ av försäljning som påminner merom den fysiska.Syftet med denna studie är att försöka identifiera de olika typer av affärsmodeller ochdistributioner som finns i dagsläget, och om det finns behov av att införa någon typ avstandard i form av riktlinjer och rekommendationer för digital distribution.Studien visar att det skulle vara problematiskt att tillämpa riktlinjer som skulle fungera ipraktiken för alla dessa varianter av digital distribution. Men samtidigt identifieras ett antalproblem som individuellt skulle kunna åtgärdas med hjälp av några av de riktlinjer ochrekommendationer som tas fram genom bland annat kvantitativ undersökning blandspelkonsumenter och intervju med Sveriges största aktör inom området..

Radio frequency identification (RFID) is a versatile wireless technology usedworldwide. The fields of applications are many and its popularity constantlygrows due to smaller in size, better and less expensive components. RFID isused to identify, track or share information about an object using radio waves.This master thesis describes the process of designing and implementing ahandheld UHF RFID reader. The goal was to, based on a UHF RFID-chipdesign a fully functional, small in size and power efficient device. Amicrocontroller provides the user interface and is also used to control theRFID-chip and a Bluetooth device.

The aim with this thesis came out of a strong interest for Passage Retrieval. Our intention has not been to evaluate an IR-system. Instead our goal has been to analyze the result of indexing documents and their passages. We have been studying the weights of the different terms in the different indices, in comparison with other parameters like frequency, normalized frequency and the inversed document frequency. Further more we have been looking at how the weights are spread using for instance the standard deviation.

Bakgrund: Vi anser att en framtida utmaning är att bygga in en flexibilitet i den fysiska distributionen. Detta innebär att ett detaljhandelsföretag skall ha möjlighet att växla mellan att stundtals distribuera en och samma produkt via centrallager och stundtals direkt från producent till varuhus i förädlingskedjan, en flexibel fysisk distribution. Syfte: Syftet är att utröna förutsättningar för och konsekvenser av en flexibel fysisk distribution för de olika aktörerna i en förädlingskedja, i vilken detaljhandelsföretaget besitter en påtaglig maktposition. Genomförande: Empirisk data har samlats in genom en fallstudie i IKEA:s förädlingskedja. Resultat: En integrerad förädlingskedja med ett tydligt supply chain synsätt, i vilken samtliga aktörer samarbetar och har incitament till medverkan, utgör en förutsättning för en flexibel fysisk distribution.

AbstractVäxjö University, School of Social SciencesBachelor thesisTitle: Ansvaret för skolan ? en studie om ansvarsfördelningen ur ett nyinstitutionalistiskt perspektivAuthor: Hanna JanssonSupervisor: Conny JohannessonThe aim of the study is to investigate which ideas that dominated the official political debate concerning the responsibility distribution for the Swedish school from 1974 to 1991.The study asks two questions: What ideas have dominated the official political debate concerning the responsibility distribution for the Swedish school from 1974 to 1991? and Why did the responsibility of the Swedish school change in 1991? In order to answer these questions an idea analysis were used. Three ideal types concerning democracy, effectivity and professionalism were used in analysing official governmental documents. The conclusion is that all three ideal types dominated the debate concerning the responsibility distribution, but in different degrees, and they can also explain why a new responsibility distribution came up in 1991..

Tree fiber lengths controls properties like strength and smoothness in paper and other wood products. For forest researchers it is of interest to be able to determine the fiber lengths in standing trees. Mo?rling et al. (2003), among others, have developed methods to estimate fiber length distributions in standing trees without damaging them.

In Swedish sheep industry it is desired to have lambs slaughtered evenly distributed over the year. Swedish sheep are generally seasonal breeders with lambs born in the spring and slaughtered in the autumn. Some of the breeds, e.g. Swedish Finewool and Roslag sheep breeds have shown ability to lamb out of season. For increased knowledge on the possibilities to breed for out-of-season lambing in Swedish sheep breeds, the aim of this master thesis is to study the variation in frequency of two alleles in the MTNR1A gene in the three breeds; Gotland, Swedish Finewool, and Roslag sheep.

Tjänstesektorn är en av de sektorer som ökar mest. Fler och fler tjänsteföretag dyker upp på den svenska marknaden, något som medför att nya konstellationer uppstår inom och utanför företagens funktioner. Distribution, att förflytta produkt från producent till konsument, är en av dessa funktioner. Hur ser konsumenten på detta när förutsättningarna för distribution ändras. Vårt syfte med C-uppsatsen är att undersöka är att undersöka i vilken grad faktorerna pris, distribution, image och trygghet styr valet för en kund att välja en mellanhand som leverantör av tjänsten istället för producenten.

Tree fiber lengths controls properties like strength and smoothness in paper and other wood products. For forest researchers it is of interest to be able to determine the fiber lengths in standing trees. Mo?rling et al. (2003), among others, have developed methods to estimate fiber length distributions in standing trees without damaging them.

A design methodology to mitigate timing problems due to long wire delays is proposed. The timing problems are taking care of at architecture level instead of layout level in this design method so that no change is needed when the whole design goes to backend design. Hence design iterations are avoided by using this design methodology. The proposed design method is based on STARI architecture, and a novel initialization mechanism is proposed in this paper. Low frequency global clock is used to synchronize the communication and PLLs are used to provide high frequency working clocks.