The main purpose of this report is a first step to cover the scarcely investigated subject of interspecific competition between roe deer, Capreolus capreolus, and fallow deer, Dama dama. The report focuses on the distance between individuals of roe and fallow in the study area as well as which factors that is affecting the variation in distance depending on fallow deer group size and changing population density over time and in two areas. For additional information the history of the populations, such as harvest and distribution, is also investigated. The report came to the conclusion that interspecific competition between the species do occur. The elevated distance between individuals of the two species is clearly significant. The most important factor affecting the distance seemed to be the size of the fallow groups.

The objective of this work was to evaluate and implement a number of energy saving functions for a specific embedded system. The functions were then grouped into a number of energy levels with known properties in terms of functionality, energy consumption, and transition time between the levels.The embedded system consisted of an AT91 ARM9 processor, GSM/GPRS modem, display, Ethernet and other peripheral units. Some energy saving methods that were considered were suspend to RAM, suspend to disk, frequency scaling, and methods for saving energy in the modem, Ethernet, USB and display backlight. The functions were grouped into levels and an interface was specified for controlling the energy level.It proved possible to get known properties within the defined energy levels, even though the paritioning of functions into these levels proved to be sub-optimal in a typical application usage scenario because it was designed for mainly energy consumption, not usage.The final result is a number of energy saving functions grouped into levels, which are controllable via an application interface. Each of the levels have a known energy consumption in both loaded and un-loaded mode..

The waveform of a radar signal affects the resolution in velocity and distance. The ambiguity function is used as an aid for analysing narrow band radar signals simultaneously in time and frequency. An analysing tool for wide band radar signals is missing.This thesis describes a generalised ambiguity function to be utilised for study of wide band signals. Waveforms are further synthesised with help of the developed analysing tool. The aim is to start with a certain ambiguity function and find a waveform that reproduces the same ambiguity function.Mathematical formulas are presented and implemented in Matlab to produce the wide band ambiguity function.

The main focus of this essay is to analyze whether strict employment protection legislation has a negative effect on the labour market possibilities for youth in the EU or not. To empirically examine the labour market possibilities for youth, data for unemployment rates and incidence of temporary jobs are used. By doing simple correlations between the different labour market characteristics and OECD?s employment protection legislation index the effect of the latter is tested. The result is that a tendency for youth unemployment and frequency of youth with temporary employment to be higher when employment protection legislation is strict can be seen.

Radio Frequency Identification (RFID) är en teknik som enligt många utsetts till framtidens teknologi inom Supply Chain Management. Detta då RFID, utan involvering av människan och utan behov av fri sikt, på distans kan utföra effektiva identifieringar av objekt. Det har emellertid, genom forskning, uppmärksammats problem med RFID och dess i vissa fall bristfälliga ändamålsenlighet inom logistiska sammanhang. Utifrån de möjligheter och hot som RFID innebär, har detta examensarbete kritiskt undersökt hypotesen: "Logistiska RFID-implementeringar är lönsamma och tillförlitliga". Analysen grundar sig på ett arbete genomfört vid Volvo Car Corporation (Volvo) i Göteborg och Olofström, där ett pilotförsök med RFID- utrustning för lång avläsningsdistans installerats och processeffektivitetsstudier fullföljts.

The objective of this work was to evaluate and implement a number of energy saving functions for a specific embedded system. The functions were then grouped into a number of energy levels with known properties in terms of functionality, energy consumption, and transition time between the levels.The embedded system consisted of an AT91 ARM9 processor, GSM/GPRS modem, display, Ethernet and other peripheral units. Some energy saving methods that were considered were suspend to RAM, suspend to disk, frequency scaling, and methods for saving energy in the modem, Ethernet, USB and display backlight. The functions were grouped into levels and an interface was specified for controlling the energy level.It proved possible to get known properties within the defined energy levels, even though the paritioning of functions into these levels proved to be sub-optimal in a typical application usage scenario because it was designed for mainly energy consumption, not usage.The final result is a number of energy saving functions grouped into levels, which are controllable via an application interface. Each of the levels have a known energy consumption in both loaded and un-loaded mode..

This essay is an investigation of the level- and importance of interactivity on YouTube for the active user. YouTube is a great example of a user-friendly Internet environment which enables the users to take part in a virtual community where they can create the content and, with the various functions the site has to offer, interact with each other. With Uses and Gratifications as a tool for this research we look at the motivations and needs of the user and how they come into play on the most popular video distribution site in the world today. Qualitative interviews on Swedish respondents give us insight in how the YouTube-users with their own words perceive this relatively new highly interactive era. We focus on a narrow group of the most popular age-group of YouTube-users to go deeper - not to expand.

New technology makes it possible to remotely measure all consumers in a power network onan hourly basis and store the values in a database.This thesis work describes the conversion process between automatic meter reading systemMActor and calculation software Xpower.Then the possible differences between calculations of power networks using load curves incombination with a yearly estimate of consumption and calculations using hourly measuredvalues is examined.The result of the comparison shows that, for the power network under inspection, nosignificant difference could be noticed. This does not mean that calculations using hourlymeasured values would be unnecessary. I believe that in a near future calculations using hourmeasurements will be the primary choice for many power companies to whom technology isavailable.Also some basic calculations of fundamental power network parameters, such as power factorand loses, are presented using hourly measured distribution transformers in combinations withits hourly measured loads.The report is written in Swedish.

The dissertation deals with an account of actual problem, which can arise within EMC and power quality. The cause of power interruption and what can be done to minimise the power interruption is discussed. It also includes a definition of planning levels and which factors one needs to have control over to carry out a possible planning strategy and how the local distributions net could be more secure. The electrical net could be secure but no system can be free from interruption.The dissertation examines two distribution transformers: GLA40T1 (Glansås) and T399 in Tranås Energy which don?t have regulators.

Ecolean Development AB are developing and manufacturing filling machines for pasteurized liquid food products. Because of lack of any appropriate supplier of box closer which seals boxes with small flaps, they have decided to start a project to develop a prototype of a box closer. Due to long experience from industrial automation I have been given a chance to develop control system for a box closer. Degree thesis involves electric design in ELPROCAD ic PRO and programming of PLC (programmable logic controller) and HMI (Human Machine Interface). The report describes degree project from the project plan phase via the development phase to the conclusions.

Our exam paper is about young adults? use of intensifiers in school papers. The theoretical background includes previous research about intensifiers in the Swedish language and above all young adults? use of intensifiers. We have chosen to focus on all intensifying expressions which young adults? use, because we did not want to limit our research material.

Denna rapport återger arbetsprocessen kring att utvärdera datalagringsstruktur och förbättra prestanda för generering av parameterfiler för kortterminaler. Arbetet utfördes på plats hos Esplanad AB, ett företag som bland annat arbetar med säkerhetslösningar och distribution av inställningar för betalstationer.Uppgiften bestod av att utvärdera möjligheter till att förbättra databasen som sparar alla inställningarna för betalsystemen, samt att förbättra kodstruktur och prestanda för programmet som genererar filerna.Rapporten beskriver testning av prestanda, både på Esplanads gamla program för att generera parameterfiler och det nya som konstruerades. En lösning presenteras som inkluderar förbättring av filgenereringens prestanda och en ny struktur på databasen för ökad skalbarhet.Tester visar att det nya systemet klarar av att skapa parameterfiler på TLV-format ungefär 16 gånger snabbare. Den föreslagna lösningen implementerar parallella processer och replikering av databasen..

GNT Group is a Nordic/Baltic wholesaler that distributes products in the IT, entertainment and home electronics sector. GNT is facing problems with inaccurate inventory levels which can lead to unnecessarily high inventory carrying costs or lost sales. Currently the decisions about when and how many to order are made somewhat arbitrarily by the responsible personnel. Their decisions are based only on some brief sales history and on experience. GNT wants to develop its ERP system to be able to support the purchaser in these and other related decisions.

Fragmentation and reduction of forest area is a threat for many forest species and their habitat. Deficiencies in forest quality, such as lack of dead wood and old trees, are one explanation of the threat. The most important action to prevent the continued loss of forest types is to protect forest, but also to restore and to create areas that not previously had high nature values. Hence one of the key strategic roles for Fritid- och Naturkontoret, Uppsala municipality, is to monitor biodiversity in the context of urban planning. The majority of the Uppsala municipality residents live in urban areas and most of them spend some of their spare time in natural areas in cities and their immediate surroundings. Exploitation in and around Uppsala is high, but it is important that there is enough nature close to houses to meet the residents? needs of recreation.

This report presents the use of questions by both teachers and students in chemistry class. Both students and teachers have been observed during 24 lessons, both theoretical and practical. In addition, interviews have been made with the teachers and the students have answered a questionnaire. The result show that a high number of questions are asked, more than one per minute and that both teachers and students ask the same amount of questions. This contradicts earlier findings were teachers questions dominate.