Ensåsengruvan is a mine situated within Ljusdals municipality in central Sweden. Themine was in use from 1984 to 1991 and has since been undergoing a remediation program. Mine tailings from sulfide rich ore is a potential environmental hazard due to its tendency to cause acid waters and heavy metal leakage. Lake Ensjön is situated one kilometer from the mine area. Due to the hydrological conditions it was not expected to receive inflowing water from the mining area.

Syftet med vår undersökning var att undersöka om extrem-/äventyrssport hade en plats i kursen idrott och hälsa A. Vi valde att skicka ut förfrågningar till 20 skolor i Malmö och grannkommunerna, av dessa fick vi svar från tio och endast fyra ville delta i undersökningen. Detta gjorde att vår undersökning omfattar fyra intervjuer med utbildade idrottslärare på fyra olika gymnasieskolor i sydvästra Skåne. I vårt resultat kom vi fram till att tre av lärarna hade extrem-/äventyrssport vid ca fem lektionstillfällen per termin, och en hade inga lektioner alls med denna typ av aktivitet. Det var många faktorer som spelade in när lärarna beskrev varför de inte hade så många lektionstillfällen med anknytning till extrem-/äventyrssport bland annat tid, resurser, skaderisk, engagemang och förutsättningar i närmiljön. Alla lärare vi intervjuade hade en positiv inställning till extrem-/äventyrssport i skolundervisningen och skulle gärna vilja få in fler lektioner med denna form av aktivitet, eftersom det hjälper att stärka elevers självkänsla, ger en allsidig träning och är ett bra verktyg för teambildning. Tre av dem såg det som väldigt viktigt att idrottsundervisningen i skolan följde med i utvecklingen, anammade de nya aktiviteter som ungdomar sysslar med utanför skolan och att extrem-/äventyrssport hade blivit ett stort fenomen i samhället.

Concrete is one of the world?s most common construction materials and is composed of 70-80 % stone material. Today crushed stone is used as aggregate in concrete in order to replace natural aggregates due to strong environmental reasons. Stone crushing yields flaky material and in this thesis studies are made on the flaky particle shape and how it influence properties of concrete such as workability, rheology and strength. The concrete recipes used in this thesis have fixed values, the only variable is the flakiness of the crushed stone.

Title:Cash is King ? or is it?Level:Final assignment for Bachelor Degree in Business AdministrationAuthor:Caroline Eng and Jessica HillbergSupervisor:Jonas KågströmDate:2011- 06Aim:There is a long tradition of trading the currency and the first coins can be traced back to Persia already 500 BC. With the modernization of society and the technological advances we have made in recent years, we are now using electronic payments more and more. We pay by card, Internet banking and mobile phone in addition to cash. The purpose of this paper is to follow Swedbank project "cash smart" and have it as a basis when we examine if we are heading for a cash-free society and what obstacles and opportunities there is for a cash-free society.Method:We have used a qualitative method to conduct interviews with two individuals involved in the project "cash smart" at Swedbank in Gävle.

Title: Bottleneck management through materials administration Course:  4FE05EAuthors:  Mikael Karlsson and Johannes Mueller  Examiner: Helena ForslundKey words:  Bottleneck management, material management, process description, timber, proceduresPurpose:   The objective of this study is divided into three parts, all three parts of the purpose aim for the same goal. Namely, to improve the material management so that this enables the bottleneck in the planing mill to keep a continuous  flow, and thereby minimizing the risk for production stops at LB-Hus.  Part.  1:  Identify  and  analyze the material management  connected to  the planing mill  in order to identify problem areas.Part.2:  Identify  improvement potential  in the material management connected to the planing mill.  Part.3: Suggest improvements in the material management connected to the planing mill. Theoretical framework: Process mapping, inventory accounting, balance safety, inventory availability / service levels, safety stock and reorder point, forecasting and routine descriptions.Empirical foundation:  Interviews carried out at LB-House,  illustrated with the help of process maps and a description of each process.  Conclusions:  To work with  the  suggestions  given  and  to  follow  clear procedures  in  all  processes would  result in  a more  efficient  inventory management,  it would also present  a  solution  to  the problem regarding the planing mill being a bottle neck.Suggestions for further research: Review and map the information flow from demand to production start.

During this master thesis, wear and friction properties for the high-temperature alloy Kanthal APMT were studied. The results were also compared to 253MA. The initial tests showed, among other things, that the surface fineness of the muffle tubes matters in real applications like conveyor belts. A 253MA-sample wear-tested against a 253MA-tube showed lowest wear at 900°C while a pre-oxidized APMT-sample wear-tested against a APMT-tube had the lowest mean value of the friction force at 1100°C, compared to all other tests..

The incineration of waste is steadily increasing in Sweden and so is the production ofashes. The bottom ash has for many years been used as construction material inlandfills. Now many of the nation's landfills are closed and there is a great need to findanother beneficial use for the ash. Bottom ash is a gravel-like material and with itsmaterial properties it can replace natural gravel in parts of roads and surfaceconstructions. Today this use is only approved within landfill areas where leachate iscollected and checked.

Habitat mapping was conducted in the main stem of River Vindelälven in the autumn of 2009 along the salmon distribution area. The aim was to estimate the quantity of potential reproduction areas, including spawning and juvenile rearing habitats. The mapping included 61 km of various stream sections along the river length of 269 km. The total area of stream habitats was estimated to 647 ha of which 396 ha (61%) were considered as either potential or optimal juvenile nursery habitats. The area of these two habitat classes were used to estimate the smolt production in the river by using electro fishing densities of juveniles (0+ per 100 m2).

After been told that an ordinary winter service for our combine should cost more than 20000 SEK, not included spare parts, I decided to write this paper about today?s requirement of the workshop on a farm. I think that the lack of proper premises is the reason way not more of the ordinary machinery maintenance or upkeep is performed on the farm. When I did my literature survey I found that the Swedish environmental code, set by the Swedish law regulate how drain or sewer should be built. The environmental code however leaves a lot for your own interpretation. It might not be so bad but it must be very hard for the local environmental office to interpretation the regulations, since they are the ones that gives permission for the sewer in your workshop.

Uppgiften som låg till grund för denna uppsats, var att ge förslag på produktivitetshöjande åtgärder på Electrolux Distriparts godsmottagning. Vår avsikt var att tillämpa delar av Toyotas produktionssystem på den befintliga processen. Detta resulterade i en serie förslag som, om de tillämpas, drastiskt kommer höja produktiviteten i den aktuella processen..

The objective with this project was to design a new lifting aid connected to toilet chair.A questionnaire distributed at three homes for aged people indicated that there was an interest in a mechatronic lifting device.Since existing products have limited tilting functionality, the new design was chosen to introduce lifting by motorised tilting of the sitting platform. The mechanical construction was analyzed based on a maximum load caused by a person with weight 160 kg. Two linear actuators were used to control the tilting/lifting of the sit ?place, making standing-up easer.Finally, 28 persons tested the new lifting device and gave their impressions. Many appreciated the safe, stable lifting speed.

After been told that an ordinary winter service for our combine should cost more than 20000 SEK, not included spare parts, I decided to write this paper about today?s requirement of the workshop on a farm. I think that the lack of proper premises is the reason way not more of the ordinary machinery maintenance or upkeep is performed on the farm. When I did my literature survey I found that the Swedish environmental code, set by the Swedish law regulate how drain or sewer should be built. The environmental code however leaves a lot for your own interpretation. It might not be so bad but it must be very hard for the local environmental office to interpretation the regulations, since they are the ones that gives permission for the sewer in your workshop.

Bobergs printing house in Falun has during some time had problems regarding deposits on blankets intheirs Müller Martini UV-printing presses. Deposits appear in both image areas and non-image areas.These areas have been analyzed and the deposits on non-image areas contain chalk, clay and talc. Thequestion remains how these material bond to the blanket surface. The chalk and clay comes from thepaper. The talc comes from the ink.

This thesis includes a mechanical engineering design work performed incollaboration between ÅF and Halmstad University. The work is done by FredyOlsson?s methods of Principle- and Primary Construction and David Ullman?stheories of Design for Assembly.The group was commissioned by ÅF to produce a concept to narrow down theassembly time of today?s luggage doors by reducing the numbers of adjustmentoptions. They also wanted it to be easier to mount the assembly by making itpossible to adjust the door in a closed position. Today luggage door takes, with its10 adjustment possibilities, around 4 hours each to assemble and ÅF wanted anassembly time around 10 minutes per door.Initially a preliminary study was made where the group began reviewing today'sconstruction and mounting of rails and doors on buses.

Title:Cash is King ? or is it?Level:Final assignment for Bachelor Degree in Business AdministrationAuthor:Caroline Eng and Jessica HillbergSupervisor:Jonas KågströmDate:2011- 06Aim:There is a long tradition of trading the currency and the first coins can be traced back to Persia already 500 BC. With the modernization of society and the technological advances we have made in recent years, we are now using electronic payments more and more. We pay by card, Internet banking and mobile phone in addition to cash. The purpose of this paper is to follow Swedbank project "cash smart" and have it as a basis when we examine if we are heading for a cash-free society and what obstacles and opportunities there is for a cash-free society.Method:We have used a qualitative method to conduct interviews with two individuals involved in the project "cash smart" at Swedbank in Gävle.