In today?s fast growing and closely connected society, a reliable and energy efficient transportation system is more than ever desirable. Nowadays the significant part of the transportation sector?s energy demand is supplied by fossil fuels.Improving energy efficiency in combustion engines will result in reduction of fuel consumption and CO2 emissions. A modern internal combustion engine has an efficiency of 30-45 %, where the most energy loss occurs as result of heat losses in the exhaust and cooling systems.

In order to measure the quality of the logs, one can with help of Fast Fourier Transform technique get the signals resonance peaks. With help of these peaks you can see whether the quality of a tree is good or bad. This report contains the work of a where a program has been developed to be able to process a vibration created by an automatic hammer hitting on a log of wood. From the processed signal the program should be able to show both the raw wavesignal and the processed measured data from the resonance peaks. Beyond the raw wavesignal and resonance peaks the program should also be able to control the automatic hammer.

In this project the focus has been on the system for recombination at Oskarshamn 2. The recombining systems have on several occasions switched paths due to low pressure before the last ejector that?s feeding the recombiner. Of the mentioned reason, events and several measuring points have been analyzed in this report since the installation of the recombining systems.In order to prove theories and demonstrate what may be the cause of this problem, we used heat balance calculations by the program Probera. Using the program, we can demonstrate that the catalytic process does not reach the desired temperature with the amount of combustible substance.

Since long, Sweden has had exceptionally low calf mortality compared to most other countries. The tradition has been to keep calves in individual pens. With increasing number of cows per herd there is now a larger interest in more efficient and economical group systems for housing calves. However it has been noticed that bigger herds have more health problems and higher calf mortality than smaller herds. The early signs of disease are harder to detect when the animals are not fed manually.

In health care today at Uppsala County Council the daily work involves spending time at the computer. IT-systems were implemented to support and aid the care givers in their work. Around these systems there is a support organization to support the users in using the system. The aim of this thesis is to investigate this organization in terms of how well it works and how successful it is in helping the users. This has been done by investigating the flow of information trough the organization and by focusing at the role of IT-coordinators with responsibility for support, process development, education and statistics.

The numbers of mergers and acquisitions have increased significantly in the last period of time. Although this popularity for mergers and acquisitions, most of the mergers and acquisitions fail to create value. One explanation to this failure of value creation is, according to several studies, how companies treat integration of information systems in the pre-merger evaluation. The research within the field argues that information system integration should have a proactive role in mergers and acquisitions, meaning that information system integration should support the organizational change and normally be considered in the premerger evaluation. The aim of this thesis is to study issues that affect whether companies choose to consider information system integration proactively, when involved in mergers and acquisitions.

At a manufacturing company, due to the competition the price is reducedtowards the manufacturing cost. Therefore it is important to maintain control ofones costs and keep calculations up-to-date.This thesis deals with cost accounting at a aluminium-processing company. The report focuses on calculating machine cost per hour since the manufacturing costs are the major part of the total product cost.Managers on the company believe that the costs they use in calculations todayneither is up-to-date nor advantageous in a market aspect and due to that their calculations need to be revised. The machines cost per hour is a major part in the manufacturing calculation. The company wants to provide a competitive price that also covers their costs.

AbstractSAAB has for a long time used user controlled pilot models in ARES. ARES is a simulation tool used in the desktop environment for simulations and calculations of the JAS 39 Gripen fighter and other aircraft. ARES stands for ?Aircraft Rigid body Engineering Simulation?. To work with these pilot models has been both time-consuming and inefficient.

Denna uppsats har sin utgångspunkt i den tekniska evolution som har skett i affärssystemens värld. Syftet var att undersöka och beskriva implementat-ionsfasen av ett Enterprise Resource Planning System som tillhandahålls som en tjänst via internet. Fokus var att identifiera framgångsfaktorer för implementationen med hjälp av ett fallstudiebaserat tillvägagångssätt där tonvikt legat på intervjuer och andrahandsmaterial. Undersökningen visade att bland annat valet av ett för organisationen passande system, en omfattande verksamhetsanalys, implementeringshjälp av konsulter samt anpassning av affärsprocesser är viktiga faktorer för en framgångsrik implementation. Därtill såg vi att en tydlig projektplan, en Project Champion och dedikerade resurser också var viktiga faktorer för framgång..

This paper examines and analyzes effects of the introduction of a new management control system tool within a Swedish public health organization, the Södra Älvsborg hospital, and its possible effect on organizational change. The new management control system tool, known as the SÄS-model, has been widely criticized for being too costly and with too small positive effects to be shown. Our approach has with that as a background been to examine whether the implementation of the SÄS-model and its balanced scorecard has been able to result in effects regarding organizational change. We have through a case study aimed to analyze how a management control system, much alike one that is typically used within foremost private organizations, can promote organizational change. Our results suggest that the implementation of the SÄS-model and the balanced scorecard has given the organization clearer visions and goals.

The usage of visions and strategies is something that helps an organisation to create an imaginary scenario and guide them of how to realize these goals. During the years of 2006-2008 Region Gotland presented a document that was supposed to show the region's visions. The theoretical framework of this thesis is based on the stakeholder theory, Balanced Scorecard (BSC) and Management Control Systems Package (MCS). Personal interviews were conducted within the organisation Region Gotland, with individuals whom are directly linked to the visions and strategies of the organisation. The purpose of this study is to clarify the concepts of vision and strategy, and what their impact is on the organisation's work on the operation level.

Process standardization is a topic that has generated a lot of research and literature. At first, the focus was on production; today processes are used in all different kind of business areas.The aim of this study has been to analyze how processes can be applied on development businesses and how IT systems affect the result of the process. To accomplish this, we have asked questions such as what standardization is in a development process? Why are the processes standardized? What difficulties can appear with standardization? And how the IT-systems affect the result of the process?To answer these questions, we have preformed a case study on Saab. Saab is a well know Swedish company who are working with a project called the GMS-project, where they develop processes to cover the whole company´s business areas.The literature gives the reader an understanding of processes and standardization.

This study is based on an examination of students? habits of using the Internet in formal and informal environments. The focus within this study is on what kind of activities students use the Internet for and how and if their teacher connect the students actual usage of the Internet to base the education in school on it. What we have discovered in this report is that the student in this examination uses the Internet as a tool for communicative and entertaining purposes. Though, the use of the Internet is different depending on which physical environment it is situated in.

This thesis is about Swedish and Serbian teachers and their views on how literature should be taught to students in high school. The twist is that these teachers live in two different European countries, and work under two different educational systems. Three of them work in Stockholm, Sweden and the other three in Belgrade, Serbia. The purpose of this thesis was to find similarities and differences in the practice of teaching literature among teachers in these two different educational systems. The teachers were interviewed separately and spoke freely about their views and methods when teaching literature.

Objective: The aim of the study is to describe pupils' understanding of the mathematical concept of function. How do pupils define the concept of function? What images of the concept of function evoke when they solve tasks, which involve identifying and constructing functions?Theory: A student's thinking about a mathematical concept depends on more than just the formal definition of the concept; therefore Tall and Vinner introduce the term concept image to describe the role cognitive structures play when students learn about concepts. The cognitive structure includes all mental images, associated properties and processes that an individual associates with a given concept. According to Sfard, an individual's understanding of mathematical concepts may have different character: an operational conception, where a concept is conceived as a process and a structural conception, where the given concept is conceived as an object, that is, as a whole.Method: 16 pupils at the Science Program at two different upper secondary schools inSweden answered a questionnaire on the mathematical concept of function.