The viscosity of air buildings is a hot topic within the construction performers, which the industry feel they have too little knowledge about. This study is mainly aimed against air density in apartment buildings and airflow measurement. The study consists of a theoretical reference, educational visit, interviews and a survey conducted among construction workers at Magistratshagen in Linkoping.Earlier requirement in terms of air leakage through the climate screen was removed and today there are only energy requirement for a dwelling in Boverkets Building Regulations. The difference between a passive and a typical air tight construction is that the passive house have a maximum requirement of 0.3 l /s m2 of air leakage through the building climate screen. The requirement imposed on passive houses is to minimize the supply of power and energy for heating the building.Air tight constructions have heavy demands on the performance and accuracy of everyone involved with the project. The client must specify their requirements and also be prepared to pay for any additional costs. The architect and building planners have to design the building with regard to air tightness. Finally, the construction workers are required to do a careful work in order to get all the connections in the building air tight.The study suggests that an air tight building is a closed system where no forced ventilation exists. There are no reasons not to build too tight as long as there is a functioning ventilation. In this study the authors ask themselves how an air tight building changes over time. No theoretical information has been found on these changes, but the respondents assume that air density decreases with time. The deterioration is mainly assumed to be caused by construction materials changes over time. The study shows that construction workers knowledge of air tight construction is mixed, which they themselves admit in the survey..

A secondary and a pioneer tree species can with advantage be included in a mixed stand to increase the use of sunlight. Nitrogen-fixing plants have been shown to increase the supply of nitrogen in the soil by, for example, litter fall. This deposition acts as a biological fertilization, which may be used by non-fixing plants. Alder is a nitrogen-fixing, pioneer tree species that loses its nitrogen-rich leaves late in the autumn. The aim of this study was to examine the effect on the total volume of production, when different proportions of nitrogen-fixing Alder were part of spruce stands.

The Department of Forest Products and Management, Swedish University of Agricultural Sciences has received means from Vinnova for a preliminary study of the organisation of logging work of today and how a better logging organisation should be brought about. This thesis reports results from qualitative interviews with nine forest machine contractors regarding the situation of their companies. The interviews have been analysed with respect to the genesis of the companies, which tasks they perform or that they could consider perform-ing, business relationships of the companies, relationships between the different partners of the companies, and the state of competition experienced by the contractors. The companies have developed either from the contractor previously being machine operator employee or from that the contractor in making has owned a machine and needed work. Their primary business is mechanised logging.

Background: Inter-organisational ways of working have become more and more common during the last decades. In order to attain efficiency and productivity, such inter-organisational relationships need to be governed and controlled. However, studies have shown that inadequate control is one of the main reasons for why inter-organisational relationships fail. One of the means that can be used for governing and controlling a business is management control. The use of management control in inter-organisational contexts is a quite unexplored area of research at the present time, which might seem somewhat surprising considering the fact that inadequate control is a common explanation for why inter-organisational relationships fail.

In Stockholm, Johanneshov the Slaughterhouse area (Slakthusområdet) can be found. A number of companies have gathered there providing the Stockholmers with meat products. This area has a great need for cooling to supply large cold storages. To facilitate this, a central cooling system has been built, supplying the area with effective and safe cooling.The aim of this master thesis study is to give hints to energy efficient and reliable changes that can be put in place at a low marginal cost depending on the future activities in the area. The suggested changes will be presented to the company Bravida (managing the system), which also desires a deeper understanding of the energy flows through the central cooling system.Firstly visiting the site with proper guidance, we have then tried to understand the function of the system including which machines and media that are used.

In a historical view, house prices have developed at the same rate as inflation. In the end of the 20th century the prices on the housing market started to differ from the inflation rate, and today the deviation is strong and the real price increase has been very strong.The financial crisis in 2008, which was a result of a subprime mortgage crisis on the American real estate market, has made several agents on the housing market in Sweden question today?s prices. Robert Schiller, an American economist who predicted the mortgage crisis in 2008, claimed during the Nobel Prize ceremony 2013, that Sweden shows signs of a financial bubble ? "I think that people here in Sweden have an illusion that increasing prices is a lasting trend, but that is more suggestive of a bubble".

The environmental monitoring in Sweden has been developed by several different parties and is now being coordinated and made more effective in order to meet the current demands on high quality information regarding the state of the environment. Sweden has been divided into five different water districts based on watershed areas because of requirements in the Water Directive of the EU. In Sweden there are two common types of environmental monitoring programs used to gather information on changes in time and in space. Currently both these two types are used for lakes in the water district of the western sea but only one is used for watersheds. The purpose of this report is to supply basic information regarding the possible need for a second environmental monitoring program for watersheds in order to better describe the spatial variation within the district as well as to determine the number of samples necessary in order to describe the district over time and space.

Mobility Management is about affecting and changing the demand of mobility. It?s not about what traditional planning?s been focused on; to supply for the demand. The demand of mobility is created by us humans since the traffic exists of us. That means that Mobility Management is about changing our needs.

With the climate change issues growing in importance on the social agenda, the field of urban masterplanning is of no exception when it comes to minimizing the carbon footprint in a variety of projects. The aim of this thesis has been to prepare the Carbon Critical Masterplanning tool, a software plugin for carbon dioxide emissions assessment developed by Atkins, to be used in Swedish conditions. The main targets were to improve the areas of the tool associated with energy conversion and renewable energy sources, and to test the tool in a real case. A planned construction of a new campus in Albano, Stockholm was chosen for the pilot study. A 3D model was built in the tool and the carbon footprint was calculated for a variety of combinations for energy supply to the future area.

The demands for higher production yields and better quality materials from the forests are increasing globally. Tree breeding programs are directed to meet the future demands on forests. In order to capture the full benefits from the breeding programs, clonal propagation is necessary. For most conifer species, somatic embryogenesis (SE) is the only available option for large scale clonal propagation of Elite clonal material. For Norway spruce (Picea abies L.

This examination work is performed at the institution of industrial economy and production at Jonkoping technical university, for JELD-WEN Door Solutions plant in Forserum.Today the focus in the company is on to reduce their inventories binding of capitals as well as inventory of products and that includes to get a good control of the supply and handling of material which is of great importance.JELD-WEN Door Solutions is one of the worlds leading producers of windows and doors and the head-office is located in Oregon, USA.A great number of wooden doors are manufactured by the company in varying of constructions, classifications and performance.The production of the plant in Forserum has a project- and customer focus manufacturing where only internal doors are produced. The overall market they are concentrated on is to different institution such as schools, hospitals etc.The purpose of this work is to investigate possibilities to improvement of material- and production control at JELD-WEN. The report will handle the master production schedule to and from the production divisions within manufacturing industry. Focus will be on the way for information- and material flows from arrival, transport within the company and further on to customers.Further a map of the flow was performed which gave a clearer picture of the connection between the flow of information- and material for the manufacturing process. On the basis of the mapping of the flow, the group discovered that the flow of material had some improvement potential.

West Pokot County is located in North Western part of Kenya where the previous lifestyle was nomadic pastoralism. However, in recent years the semi-arid county has been under dramatic developments and a sedentary agro-pastoral lifestyle is now growing. This is a major change in production systems and there is a big knowledge gap especially for the livestock based agro-pastoral systems. The main objective of this study was to investigate the current situation of animal husbandry in West Pokot. Twenty farmers were interviewed in Chepareria Division, using semi-structured interviews to investigate if the use of enclosures have had any effect on animal husbandry in West Pokot and if so, how have this method affected the animal husbandry? The results of the study indicated that there is a difference in animal husbandry between farms using enclosures and farms not using enclosures.

In this thesis, the flows of reactive nitrogen (Nr) in Scania were investigated and quantified. The thesis was also intended to form a basis for comparison between the urban nitrogen flow and other flows of nitrogen within Scania. The management of nitrogen in society has disturbed the natural nitrogen cycle. This is linked to a series of environmental problems such as eutrophication, acidification, global warming and smog. The method used was Substance Flow Analysis (SFA) for Nr. For calculation and flow charts Scania was divided into three subsystems; air, water and society.

In this study I have analysed the history of a forest belonging to Saxåhyttan in Värmland. The study area is 448 hectares and has been used by iron industry since the 16th century. A forest that has been used by man during at least 400 years should have few ecological values. This inventory however shows the opposite. The aim of the study is to interpret the history of the forest in the area, i. e.

Although Lean has received an increased amount of attention in the service context, research still has not established how successfully Lean manages to increase service productivity; since service productivity consists of both efficiency and quality. Research regarding productivity discusses the risk of a tradeoff between efficiency and quality in service production processes. Therefore, this thesis aims to explore if the tradeoff in a production setting with low variability in demand and low customer participation exists, after Lean has been implemented. With a qualitative approach, a case study has been conducted at Scandinavian Airlines Ground Handling to evaluate the effects of Lean in the baggage handling process. The result of the study shows that the tradeoff has not been overcome; efficiency has increased at the expense of quality.