Due to increasing product availability and higher demands on fast deliveries, the competition between companies is growing. To be able to satisfy the customers? requests an efficient logistics system with short throughput time is required. By using tools associated with Lean production companies are able to make great improvements in their manufacturing systems and reduce lead times to satisfy customer demands.There are two classifications associated with manufacturing, high variety and low volume (HVLV) and low volume and high variety (LVHV). The general belief is that the concept of Lean production is difficult to implement in a production environment with high variety and low volume due to the concept being adapted to mass production.

Every year about 210 000 tones dry weight of sewage sludge is produced in Sweden. Most of the sludge is applied to agricultural land, plantsoil and landfill cover. Sewage sludge contains essential nutrients such as nitrogen and phosphorus. Nitrogen is limiting growth on solid ground in Sweden and can therefore be used as fertilizer to increase productivity. In order that the sludge can be spread to forest land it requires first a conversion of sludge to pellets, to make it more manageable.

The forest industry is one of the most important industry branches in Sweden. Since the demand of high precision wood deliveries has increased, the demand on a well constructed forest road net also has increased. A good road net gives the wood-supplier competition advantages and also increases its service level towards its customers, lumber-mills and pulp-mills. In some parts of Norrbotten, the road net is still insufficient and not yet built out enough, and that is why it is important to know how to act and where to improve the road net in these areas. The purpose of this thesis was to create a work-model for long term road planning in areas with no road net or a not yet complete road net. The model has been created in an ArcGis environment, where a long chain of tools has been tied together with the program ?Model builder?.

"Anders Andersson had a fire in his tar-kiln ". Analysis of Jonas Åström 's peasant-diary 1868-1891 Peasant diaries are notes written by farmers, crofters and other people connected with small-scale agriculture. The notes give unique information about diverse aspects of rural life, for example, personal relationships and work, travel and regularity of church attendance. One such diary was written by Jonas Åström who lived in the county of Västerbotten, Sweden. The main aim of this study is to describe the work done by farmers in the 19th century, focusing on their use of forest resources, as recorded in his diary.

According to the Swedish strategy for forest protection, additionally 40 000 ha productive forestland will be protected in the county of Västerbotten, between 1999 and 2010. A national project was carried out to distinguish the proportion of forest with a high biological value, in all counties. The project resulted in demarcation of small landscape areas or small ?biological value regions? (bvr), with higher concentrations of forests with conservation values and red listed species than the surroundings. In Västerbotten, 26 such bvr?s were identified and the Counties Agency and Forest Agency in Västerbotten developed a regional strategy for forest conservation to standardize the forest protection process.

Biofuels are getting more important as EU plans to replace fossil fuels with renewable energy sources. Because of that Sveaskog has chosen to invest in developing the handling process of logging residue. The company has a joined organisation for handling both round wood and logging residue. They are also working at integrating the forwarding of the logging residue with the rest of the harvesting team. Sveaskog is currently extracting 44 % of the available amount of logging residue.

Sammanfattning  Datum:                               2011-01-14 Kurs:                                  Kandidatuppsats i företagsekonomi Lärosäte:                           Mälardalens högskola Akademi:                           Akademin för hållbar samhälls- och teknikutveckling Handledare:                      Lennart Bogg Examinator:                      Cecilia Lindh Författare:                         Wilhelm Moby och Pia Robson Nyckelord:                         Lean Production, implementering, effekter. Titel:                                   Det lutar mot Lean ? en jämförelse av arbetet med- och effekterna av Lean Production på ASSA AB med teoretiska kunskaper inom ämnesområdet.                                           Problemfrågor:                 Hur har ASSA AB gått tillväga för att införa Lean Production och vilka faktorer har varit avgörande?Vilka effekter har införandet av Lean Production givit verksamheten? Syfte:                                 Den här studien ämnar undersöka och sedan jämföra arbetet med- och effekterna av Lean Production hos ASSA AB med teoretiska kunskaper inom ämnesområdet.   Metod:                               Metoden är av kvalitativ karaktär och med hjälp av djupare litteraturstudier och en semi-strukturerad intervju ska studiens syfte uppfyllas. Slutsatser:    Resultatet av den här studien kan sammanfattas med att det som framkommit i den empiriska undersökningen mycket väl överrensstämmer med det som sägs i den teoretiska referensramen. ASSA AB har först infört verktygen 5S och standardiserat arbetssätt, vilket möjliggjort införandet av andra verktyg såsom kanban. Inget av detta hade dock varit möjligt med ett lyckat resultat om inte personalen först blivit utbildade och en leankultur skapats.

Inventories of epiphytic lichens on Scots pine (Pinus sylvestris) were conducted at three sites in east central Sweden: along the newly build motorway (Road E4), along the old road (Road 600) and in a reference site, to compare the effects of traffic pollution on lichen diversities. At each site, species richness, lichen mean sensitivity value (MK), air quality index of the forest stand/sample plot (LKI) and nitrogen impact value (N) were calculated and it was tested if there was any difference between the sites. Twenty-four species were observed in total, and Parmeliopsis ambigua and Hypogymnia physodes were the most common species at all sites. At Road E4, fewer lichen species were observed than at the other sites and this might be due to the impact of air pollution. The species richness at Road 600 was similar to that of the reference site, which might be explained by the improved air quality.

During thousands of years, reindeer have adapted to living under harsh conditions with large seasonal variations in climate and forage availability. This adaptation implies that body functions and nourishment needs are strongly bound to the season. In the summer the reindeer has to maximize food intake to build up fat and protein reserves for the winter. More than 200 different plant species are included in the reindeer diet, but since reindeer have an unique ability to use the nourishment in lichen, different lichen species make up a large portion of their winter diet in many areas. Fundamental for reindeer husbandry is access to natural grazing during most of the year.

Forestry affects most of the forest-covered land in Sweden. In the landscape, the most common stream type is headwaters, which are important sites for many processes and organisms in both the terrestrial and the aquatic ecosystems. The aim of this study was to investigate how the abundance of benthic invertebrate functional feeding groups in headwater streams develops after clear-cutting and if it also is possible to detect a change in the composition of feeding groups. The study also attempts to determine what factors have an effect on temporal changes in abundance of these groups. For the study, 11 sites in northern Sweden were sampled for benthic invertebrates using a Surber-sampler, and for each site canopy-cover and pH was obtained.

There is a common belief that the arts contain knowledge of creativity that can enrich the business world. Similarly, the arts are in need of additional support from the private sector and know-how of business practices. In short, there is a need for mutual understanding. With my background as a dancer paired with my studies at the Stockholm School of Economics I have taken the challenge of bringing the two worlds closer together. By changing a social system, like an organization, it is possible to get a better understanding of it.

This is the project of making a stage design for Batboy ? the musical, a cooporation with a network of musical artists. The aim of the project was to create a space on stage that strengthens and expands the experience of the story told, and find design solutions that give an extra dimension to the story. The prerequisites for my work were partly defined from the produc¬tion, as were my limitations. In the cast of ten artists some were to play more than one role, often one of the opposite sex.

This paper aims to determine what is decisive for localisation of production units when a company engages in offshoring. By performing a case study on Electrolux and comparing the results with theoretical literature we discuss the implications for manufacturing companies in general. To facilitate a structured analysis we have developed a model dividing the localisation decision into five perspectives and four geographical levels. We have found that the determinants of localisation vary depending on the geographical level of the decision process. Since all geographical levels are interconnected, the analysis needed for a decision on all levels simultaneously is very comprehensive.

The highly toxic man-made substance referred to as dioxin (polychlorinated dibenzo-para-dioxins (PCDDs) and polychlorinated dibenzofurans (PCDFs)) causes severe health damages both to humans and other organisms, with lethality as its worst. Because of the toxicity several risk assessments has been performed on dioxins trying to determine at what concentration there are no risk of exposure. Resent years of research has discovered that these substances are not only anthropogenically but also producedin natural processes, like volcanoes and forest fires. To investigate if there is a need to take these naturally formed dioxins into account in the risk assessment processes, interviews with persons at relevant institutions in Sweden has been made. Analyses of existing risk assessment methods and political documents were also made to complete the picture.

The Volvo Trucks plant in Umeå is a highy complex manufacturing facility where the same production line handles a variety of different models. This require flexible and agile processes with high quality standards. This thesis studies the flow of material through a production line and how Volvo can use their existing manufacturing monitoring system to optimize the flow of materials.The goal with the thesis is to identify eventual problems with the flow of materials and to deliver a few proposals on how the production line can improve its productivity. The theory of LEAN, Just-In-Time and Supply Chain Management serves as the scientific reference to this project. By analyzing the flow of material, performing interviews and observing the processes a few problems are identified.